usb

Hi again! This time I want to know how to create a wireless network (WiFi). I have 11.1-RELEASE-p6 on a i386 processor. And yes, also I have a wifi USB adapter. It is a TP-LINK TL-WN722N. I want to know, what I need to configure to be able to use this USB as an antenna? Thanks (again)

I know this question has probably been asked a thousand times here (sorry) but I'm in need of a quality wireless USB dongle with very good range (i.e. antenna). Currently I'm using an Edimax nano dongle that I bought off Amazon which connects fine, but the signal is very weak. I'm sure with a...

Hi, I have problems there. System: FreeBSD 12 Hardware: Raspberry PI 3 + 4x USB Ethernet AX88179 I have the problem that with each reboot all UE USB network adapters are remixing and therefore are no longer useful. I can not always change the config for the entire network and rearrange all 5...

Has anyone succeeded in getting original Playstation 2 Dualshock 2 controllers to work with FreeBSD? I have two PS2 Dualshock analogue controllers, and a cheap USB adapter from ebay. It all works fine on PS2 / Windows (with adapter), so I know it is not a hardware issue. My issue is this: The...

Greetings all, First up, i'm super new to FreeBSD, so please go easy on me. (i'm rather familiar with Linux though) I have a STM32 microcontroller based USB device that presents itself as a CDC VCP device. I'm using ST's USB CDC device library. On attaching the device i see in the kernel log...

Sorry if I double the thread, but I didn't find answer. If I write a usb stick img in the Windows (tried XP and 7) then after direct write finished I have BSOD and rebooting. The same if I just insert FreeBSD installation usb to the Windows machine. So if Windows try to mount FreeBSD...

Hi, I am having problem with USB Ethernet adapter (AX88179) running FreeBSD 11.1, all the ethernet functions work, but it has much lower throughput compare the same PC running Debian 9. I tested it by running iperf3 between two PCs, the results show high Retr count. The AX88179 is listed under...

I'm having a problem with a HiFace Two DAC connected to an Ubuntu guest on VirtualBox. The host is a NAS4Free (FreeBSD based). On a bare Ubuntu I get this module correct working and reported like this in Ubuntu: [1191641.895471] usbcore: registered new interface driver snd-usb-hiface...

I am running FreeBSD 11 on a raspberrypi-B. The built-in ethernet adapter is working fine with no extra configuration. I have bought an external USB ethernet adapter and trying to get it to work. The external adapter is recognized by the kernel: in /var/run/dmesg.boot there are the following...

hi I'm new in using FreeBSD 11 but really I want to make it my primary system with arch. I read a lot in FreeBSD forum and handbook, I'm glade to do that. I begin with installed it in VirtualBox and take a time until i realize I'm ready to do it in my hard like a primary partition with other...

Anyone have experience with this product or similar high sample rate DACs on FreeBSD 11? I'm setting up a dedicated Windows box soon and/or emulation with Xen or bhyve, so I'm still going to get it regardless and will have a chance to test it myself. Supposedly it requires proprietary drivers...

I'm running a headless FreeBSD 11 box at home. Now, I'd like to use the server as a music player as well. As the interface worked without a problem on all other OS's I tried it (including Linux), I thought about giving it a shot on FreeBSD as well. Unfortunately this did not work out as...

I have a server that I am trying to install FreeBSD on using the FreeBSD-11.0-RELEASE-amd64-memstick image (the server does not have a CD drive). All the hard drives (only a couple of SSDs for now) are on a backplane attached to two Adaptec 5405z adapters. The drives are initialized and set up...

Hi all, I'm fairly new to ZFS, but I've been using derivatives of FreeBSD for a few years now, namely pfSense. I have set-up a system (Intel NUC NUC5CPYH, updated to latest firmware) to have a remote replica of a zfs volume on a USB 3.0-attached Seagate Backup+ Hub 8TB). I was slightly in doubt...

I've recently installed FreeBSD on windows xp desktop,it worked fine in the beginning but in the middle it said error 19 , and no matter what i type it always says invalid syntax,i have tried the hostress method still invalid syntax.Please help.

So i was really impressed with FreeBSD and thought about installing it on my second computer,only this time i am downloading it(i've used the freebsd disc from osdisc on my first computer).So i found a problem Unetbootin only supports FreeBSD 8.Are there any sites that can create a bootable usb...

Hi all, I want to get all devices that connected to my system. In order to I run sysctl kern.disk it gives me ada0 ada1 ada2 cd0 da0 da1. Now I want to know all informations of devices. for ada I used smartctl -i /dev/ada0 but this command not worked for flsh or cd rom. Which command will get...

OK I'm tracking CURRENT, where I have this issue. But I don't think it has anything to do with the fact that it's CURRENT. As writing the headers/tables on an 11 box, results in the same error after rebooting with the drive in the CURRENT box. Specifics; Only occurs on USB connected drives --...

Hello, I wanted to try out FreeBSD so I downloaded FreeBSD-11.0-RELEASE-i386-mini-memstick.img and wrote it on my 16 GB USB key using 'Win32DiskImager' , all went smooth the img wasn't corrupted. I then tried to boot on my usb stick but the following message appeared gptboot: primary GPT table...

I've just installed FreeBSD on metal. I've followed the FreeBSD instructions here on HAL and did nano edits on a handful of files. These instructions focused on Gnome, although they seemed general enough. (Should have gone with Gnome, anyway. KDE4 nukes dual monitor settings on reboots.) But...