usb

In April last year, I began using low-end flash (USB thumb drives) as L2ARC for a notebook with 16 GB memory. Very pleasing. Yesterday, I got an older notebook with 4 GB memory. An opportunity to tell whether a similar approach will be worthwhile. Early observations, with the cache device...

Hi All, Trying to mount the old 1TB (but working disk) on new server, and get it to appear every time on boot up (and be visible in Windows via Samba). This is what "gpart show da0" shows: => 63 1953525105 da0 MBR (932G) 63 1953525105 1 freebsd [active] (932g)...

EDIT : After upgrading to RC2 after resume X server crashes I have tried both port and pkg drm kmod both the same issue If I did zzz the x server can be launched again or after reload i915kms but if don't do that will never restore the GUI the below problem is not considered now as I lose all...

Hi all, I am trying to understand how FreeBSD's USB subsystem works and appear to be running into a kernel panic due to a failed assertion that I do not understand. the assertion in question is /usr/src/sys/dev/usb/usb_transfer.c:1954. My understanding is that you first configure...

Hi all, I am trying to attach a USB device with the usbd_transfer_setup() during the attach() stage, but am getting a kernel message saying USB_ERR_NO_PIPE. I traced this back in the kernel to sys/dev/usb/usb_transfer.c line 1156. There are a series of check-conditions that ultimately return...

Hello together, I'm new to FreeBSD, most of the system runs out of the box. Super cool. But I have two issues. One of them is the naming of USB devices. The libinput problem: I'm using wayland/sway and the command swaymsg -t get_inputs gives me the following for USB devices (mouse, keyboard...

My trouble begins when I plug it in and observe that its MBR is aberrant. dmesg: da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <EVISTR L157 2.00> Removable Direct Access SCSI device da0: 40.000MB/s transfers da0: 16122MB (16508928 1024 byte sectors) da0: quirks=0x2<NO_6_BYTE> GEOM_PART...

Good evening! I am having trouble understanding what to add to my /etc/devfs.rules in order to allow a jail to access USB devices. It is about a Raspberry Pi 3B+ running FreeBSD 13.0p4 RELEASE, I would like to set up a jail that runs comms/dump1090, which takes input data from a SDR-RTL USB...

I followed felix's instructions on this post and now have a working FreeBSD 13-RELEASE-p3 (arm64) system on my Orange Pi R1 Plus with one of the ethernet ports functioning fine. However, the USB (2.0) ports are not working - neither the built in port, nor the ones on the add-on board that came...

I'll discard this mobile hard disk drive, but for now: are interface CRC errors more likely to occur with USB, than with IDE? I suspect so … root@mowa219-gjp4-freebsd-d31121-mobile:~ # uptime ; uname -KUv 3:32AM up 1:22, 5 users, load averages: 0.07, 0.12, 0.15 FreeBSD 14.0-CURRENT #0...

How do I verify a FreeBSD installation ISO image (ie. FreeBSD-13.0-RELEASE-amd64-dvd1.iso) burned --- or written :-) - to a USB stick? The USB stick is created by the following command: dd if=FreeBSD-13.0-RELEASE-amd64-dvd1.iso of=/dev/da0 bs=1m conv=sync I've tried by issuing the following...

Ok so here's the thing.: I'm trying to purify/wipe cellphones and tablets in a safe and secure manner by using any app/program/port made for wiping HDDs and SSDs. Right now, I've tried using BCwipe to wipe the device "ugen0.2" (which is the phone I want to wipe) but it keeps resulting in an I/O...

I need to use a USB flash disk to move files to/from macOS to FreeBSD. What is the best or recommended common filesystem between the two operating systems? Should I first format the USD disk using macOS Disk Utility? What filesystem (APFS, FAT, exFAT, etc. should I choose)? Or, should I format...

It's frequently necessary to force off a computer (HP EliteBook 8570p, sometimes docked) when an attempt to suspend fails, with these messages from kernel: pcm3: unregister: mixer busy pcm3: Waiting for sound application to exit! I subscribe to this bug...

I want to set up freeBSD to a 16 gb usb driver. I tried to plug my usb while installisation and got Cam statues: CCN request completed with an error. So how can I avoid these errors and setup FreeBSD to my usb driver?

Hi, I'm trying to use Proxim ORiNOCO 802.11n USB. But an interface does not come up on ifconfig My USB Wi-Fi adapter is; # usbconfig -d 1.3 dump_device_desc ugen0.3: <Proxim ORiNOCO 802.11n USB> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType =...

I managed to solve the issue, please delete this thread

Hello, The story: we needed dedicated USB port on windows machine on bhyve so we installed a dedicated USB host controller: uPD720202 USB 3.0 Host Controller detached it and attached ppt driver to it : devctl detach pci0:1:0:0 && devctl set driver pci0:1:0:0 ppt ~~~ vm config win7 ~~~ ------...

I have аn ITX mainboard with BE-M1000 SoC. This is an eight-core ARM Cortex-A57 processor. I tried to install the FreeBSD on this mainboard. I used the FreeBSD-12.2-RELEASE-arm64-aarch64-memstick.img. An attempt to install from USB flash drive was unsuccessful. The system does not find the boot...

Recently, I installed the urjtag package on my FreeBSD 11.4 machine tingo@kg-core2$ uname -a FreeBSD kg-core2.kg4.no 11.4-RELEASE-p3 FreeBSD 11.4-RELEASE-p3 #0: Tue Sep 1 08:22:33 UTC 2020 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 urjtag root@kg-core2# pkg...