solved

  1. A

    Solved XFCE4 no mouse and often no icons in desktop after typing startx

    Hello. Earlier I had a problem with my Xfce desktop displaying a blank background, and it was solved in this thread. There was just the issue of mouse synaptics remaining. So I installed x11-drivers/xf86-input-synaptics driver. I fiddled with the entry in /etc/sysctl.conf by changing...
  2. fernandel

    Solved libunbound error

    Hi! I am using unbound for DNS over TLS from 2019 and I didn't have problem butfrom the last update I got: [1608331195] libunbound[20481:0] error: udp connect failed: No route to host for 2001:503:c27::2:30 port 53 [1608331195] libunbound[20481:0] error: udp connect failed: No route to host...
  3. B

    Solved System wide GELI encryption password change

    I've set up remote VPS systems with GELI disk encryption, including swap encryption, during FreeBSD 12.2 installation. I've locked down SSH quite securely too so I presume now when remoting in, security is reasonably assured. I want to address the possibility that within the VPS terminal's web...
  4. alfikmik

    Solved problem with sieve ... Postfix + mysql+ postfixadmin + dovecot + sieve + amavisd (with spamassassin and clamav)

    Hi there got problem with sieve (it doesn't move mails to directories i mean spam to "Junk" folder. In logs there is no information about any errors. Spamassassin is called from amavisd and tags mail (as spam) properly but sieve doesn't move mails. installed packages: amavisd-new-2.12.0_1,1...
  5. D

    Solved libxml2 - Building fails due to linking error

    Hello, I'm having this issue on a brand new, otherwise empty 12.1 jail. ===> Staging for libxml2-2.9.10_1 ===> Generating temporary packing list if test -z 'strip'; then /usr/bin/make INSTALL_PROGRAM="/bin/sh /usr/ports/textproc/libxml2/work/libxml2-2.9.10/install-sh -c -s"...
  6. D

    Error while loading linux shared libraries

    Hello, I'm trying to use a linux binary on FreeBSD. I've followed the instructions from the handbook. When I tried to run the binary, I got this error message: /lib64/libc.so.6: version `GLIBC_2.18' not found (required by ./deno) I then launched a CentOS instance and copied...
  7. TobiasW

    UFS Growing Disks

    Hello everybody, I tried to grow a UFS Partition inside a virtualbox VM (.vhd disk format). I went trough https://www.freebsd.org/doc/handbook/disks-growing.html and everything was fine until growfs /dev/ada1p3 Operation not permitted occurred. I googled a bit around and found following...
  8. R

    Continuous Reboot

    Hi My workstation reboots on a loop endlessly(looks like a memory dump). I am able to boot it to single user but not multi-user. I am attaching a video of the error with this. Please let me know what to do? Thanks Ravi
  9. M

    ZFS (Very likely FAQ but cannot find in FAQs) Move entire system

    I have a working setup (12.1 RELEASE) with 5 disks configured as a single zroot pool with RAID-Z2. I changed the computer around it and have more slots available for disks. I understand that the optimal number of disks for RAID-Z2 is 6. I understand that I cannot really add a new vdev to the...
  10. bokutin

    Solved Does fstrim work on linux with bhyve?

    # fstrim /home fstrim: /home: the discard operation is not supported This is the case if it doesn't work. I tried all of the below but it didn't work. bhyve emu: virtio-blk virtio-scsi ahci ahci-hd nvme os: centos7 linux lvm: lvm or no lvm linux fs: ext4 I'm glad if fstrim works, I can...
  11. V

    Solved nanobsd does not install packages

    Hello I am newbie with FreeBSD. My version is FreeBSD radius 11.3-RELEASE I did created successfully nanobsd with default setting when I try to install Packages it gives me strange error. Pkg downloaded in /PKg folder with pkg fetch -o ./ -d pkg dnsmasq My command is sh nanobsd.sh -b...
  12. O

    Solved Problem after upgrading to php 7.4.4

    I'm running FreeBSD 11.2r15 inside a FreeNAS jail with a FAMP stack. Apache 2.4.43, MySQL 5.7.29_1, PHP 7.4.4. I am learning as I go along but have been maintaining and updating this server for a few years. I can't seem to find a solution to this, so if I missed it, sorry. I really did...
  13. coyote_zed

    Solved filezilla error after update/upgrade

    This morning I ran an upgrade to p3 of 12.1 and also updated/upgraded all the relevant packages as well. Now when I try to run filezilla I get the error: ld-elf.so.1: /usr/local/bin/filezilla: Undefined symbol "_ZN8wxString8ms_cacheE@WXU_3.0" Anybody know of a fix or workaround for this issue...
  14. codedmart

    Solved vm-bhyve share wlan0 with archlinux

    I am trying to get archlinux running with bhyve using vm-bhyve. I followed a mix of the quick start guide here and NAT instructions here. Then in arch I just set a manual ip of 192.168.8.2, but not internet connection still in my gues archlinux system. # vm conf file: loader="grub" cpu=4...
  15. codedmart

    Solved Macbook Pro 11,4 FreeBSD 12.1 No Audio

    Trying to get FreeBSD setup on my Macbook Pro 11,4 mid 2015 15': System Information Manufacturer: Apple Inc. Product Name: MacBookPro11,4 Version: 1.0 Serial Number: C02WC0W5G8WL UUID: 069f46ff-83ea-5bb4-ac24-49662394d78e Wake-up Type: Power Switch SKU Number...
  16. D

    Solved BACULA - bacula9-server and client not compiling after move from openssl111 to openssl

    Hello everyone, Following the rename of security/openssl111 to security/openssl, I've rebuilt all of my packages depending on OpenSSL, but I got an error from sysutils/bacula9-client : --- bacula-fd --- /usr/bin/ld: warning: libssl.so.9, needed by /usr/local/lib/libbaccfg.so, not found (try...
  17. D

    loader.conf weird after update

    I've been using 12.1-RELEASE-p1 on my desktop machine for awhile now with encrypted root on ZFS. Today I decided to switch the pkg config from quarterly to latest (maybe not the best choice). The pkg upgrades went smooth, but after rebooting I was presented with a "mountroot>" prompt. I took a...
  18. toorski

    Solved SAS-12 Gb/s controller card for FreeBSD?

    I've traded my 1TB SATA/SSD for 1.2 TB SAS/Seagate-ST 1200MM088 2.5" HD with a person from craigslist. Now, I have...
  19. coyote_zed

    updating to 12.0-RELEASE-p5?

    When I currently run uname -a I get back that I am on FreeBSD version 12.0-RELEASE-p4. This morning when I ran freebsd-update fetch install I got a message stating "No updates needed to update system to 12.0-RELEASE-p5." When I try to run the command freebsd-update upgrade -r 12.0-RELEASE-p5 I...
  20. TELunus

    qt5-xmlpatterns failing to compile

    I'm trying to update my installation of textproc/qt5-xmlpatterns using sudo portmaster -mMAKE_JOBS_UNSAFE=yes --delete-build-only qt5-xmlpatterns > qt5-xmlpatterns.log.txt Unfortunately I get errors printed: Running configuration tests... Done running configuration tests. Configure summary...
Back
Top