nvidia

i915kms drives the integral display without difficulty. What's the simplest way for me to drive a display on DisplayPort? Eventually I'd like to try hybrid graphics but for now, all I want is to drive a second display. (I'll rarely use this computer without a dock.) I experimented...

I'm using Gnome 3 on FreeBSD 12.2 with a GTX 970 display adapter. The system suspends to RAM but does not resume, although it resumes with Windows and Linux on the same hardware. A post in April recommended editing /usr/src/sys/dev/fb/vesa.c so that a line is commented out: case STATE_LOAD...

Hello friends, I have a TrueNAS 12.0 server which runs with no GUI. I plugged in Nvidia GTX 1050Ti to it in order to use in ffmpeg. After plugging in pciconf -vl gave me the following output vgapci0@pci0:2:0:0: class=0x030000 card=0x85d11043 chip=0x1c8210de rev=0xa1 hdr=0x00 vendor...

Hi! Recently I bought a brand new ASUS nVidia GeForce GT710-4H-SL-2GD5. First and foremost for me in there is capacity to support up to 4 monitors with low energy consumption. With nvidia-driver-340 the videocard just works, although a full screen video runs unsatisfactory. With another...

Hi, I am a new FreeBSD user and I just installed FreeBSD on my computer. My PC has 2 graphics processing units, one on the cpu(intel) and a gpu(nvidia). First time I set it up, I had some scaling problems with the display, eg the Intel GPU has a full HD resolution on xfce but the nvidia card...

Install FreeBSD 12.2 with Gnome, when installing the nvidia-driver all the tty (Control + alt + F (x) look like this my rc.conf kld_list="nvidia-modeset" my loader.conf linux_load="YES" nvidia-modeset_load="YES" nvidia_load="YES"

Currently I have an Nvidia GTX 750 Ti video card I want to use for my little machine learning projects, and I see that CUDA does not work on FreeBSD. I am curious if I could use OpenCL https://www.freshports.org/devel/opencl with this Nvidia card, or that is out of the question too?

I am trying to install Nvidia driver on my very old computer with GeForce4 MX 440. But it failed. I have installed FreeBSD 12.1-RELEASE. The port was deleted from the source tree so I checkout https://svnweb.freebsd.org/ports/branches/2014Q4 which contains the port nvidia-driver-96. I have...

I am configuring a new workstation. The motherboard has no onboard video other than basic vga. The machine has an nvidia card installed. I have mate GDM installed and working. However when I go to System -> Pererences -> Look and Feel -> Appearance I get a message box stating that the...

I know there is a lot of thread regarding this question and I have tried a lot of them but with no positive result. I am totally new to FreeBSD but I usually manage to get my way around with Debian type distros. I installed FreeBSD 12.1 release version. I followed several tutorials and lead...

Hi Folks, I'm getting beaten a couple months by my nvidia card. I got beaten to put it working in FreeBSD 11 and now in FreeBSD 12. I've installed system and immediately updated via freebsd-update to 12.1-RELEASE-p5 and no success to put nvidia working ever since. I already tried all...

Hi, I posted before a computer which has some limited hardware. It's specs are these. AMD 64 Athlon 3000+. Nvidia FX 5700 256MB. 512MB RAM DDR x2 = 1024MB. I have installed on it FreeBSD 12.1 RELEASE-p6 GENERIC i386 with the LXDE Desktop. When the LXDE desktop wants to use a screensaver which...

I followed this tutorial to install KDE: https://www.freebsd.org/doc/handbook/x11-wm.html , but whenever I startx I got an error about frame buffer mode. I found that it means that I need to set the video card driver. I found somewhere (don't remember) a file named xf86-video-nvidia, so I guess...

Hello everyone, I'm running FreeBSD 12.1-p2 on an old Dell XPS M1330 laptop. The video card is an old nVidia GeForce 8400M GS, and everything use to work fine with driver "nvidia-driver-304-304.137_6". A few days ago I installed the latest system updates, and now X.org stopped working. By...

I'm having trouble getting my dual monitor setup to work. I have my first monitor "Screen0" plugged into my motherboard (intel, at least I think so). I have my second monitor plugged into my nvidia graphics card, "Screen1". I can get the Screen0 to work if I have my driver set to "modesetting"...

Exploring a new Dell Precision 7540 with Nvidia Quadro RTX3000: I can't find any way to control the display backlight brightness other that by running x11/nvidia-settings: nvidia-settings -a BacklightBrightness=x # x = 0...100This is good for desktop use with Xorg, but doesn't work for...

Good day, I first tried with a nvidia gtx 1050 and the standard nvidia-driver package. But I had a lot of tearing so I wanted to adjust the settings via nvidia-settings. The problem with the standard driver is that nvidia-settings do not open. So then I tried to configure the driver via a...

I have a strange situation (for me). I install freeBSD 12.1, xorg, xfce, nvidia-driver (build the 440.31 from ports) ... When I launch startx, the screen of my laptop become black with a little blanc square on top left. I lost 3-4 hour to discover that if I connect a HDMI monitor, I can see...

Hi all, I've created a post on the NVidia forum to request Vulkan support for our GPU drivers. Even for people who don't play games or anything this will become very useful in the future. OpenGL is slowly being deprecated (see my UE4 post as well) and to future-proof our favourite OS we really...

My desktop PC has an Intel i5-4690k on an Asus UEFI Motherboard with an Nvidia GTX970 GPU. It has 3 monitors connected through said GPU. Normally I run Windows but I'd like to boot into a FreeBSD 12 desktop environment more often from my other hard drive. The problem I regularly run into is that...