I have a i7 ivy-bridge put to CSM compatibility with BIOS first. My settings for the dom0 are:
/boot/loader.conf:
and followed the guide for installing the XEN-kernel. My /etc/ttys is:
First of all, it is unable to find the root device (ada1p6), even when copying it to /boot/defaults and secondly when activating the xen-kernel it doesn't boot at all, loading the modules but no xen-kernel showing up.
what do I making wrong?
Lizbeth
/boot/loader.conf:
Code:
kernel_load="YES"
vfs.root.mountfrom=ad1p6
set vfs.root.mountfrom.options=rw
if_bridge_load="YES"
if_tap_load="YES"
vmm_load="YES"
fusefs_load="YES"
xen_kernel="/boot/xen"
xen_cmdline="dom0_mem=4048M dom0_max_vcpus=4 dom0pvh=1 com1=115200,8n1 guest_loglvl=all loglvl=all"
boot_multicons="YES"
boot_serial="YES"
comconsole_speed="115200"
console="comconsole,efi"
boot_verbose="YES"
hw.pci.mcfg=0
and followed the guide for installing the XEN-kernel. My /etc/ttys is:
Code:
xencommons_enable="YES"
xc0 "/usr/libexec/getty Pc" vt100 on secure
ttyu0 "/usr/libexec/getty std.115200" dialup on secure
First of all, it is unable to find the root device (ada1p6), even when copying it to /boot/defaults and secondly when activating the xen-kernel it doesn't boot at all, loading the modules but no xen-kernel showing up.
what do I making wrong?
Lizbeth