It's unusable now with rev 17.
Code:
[B]uname[/B]
FreeBSD 8.0-STABLE #0: Wed Dec 2 18:11:00 CET 2009 acheron@:/usr/obj/usr/src/sys/GENERIC
[B]ifconfig[/B]
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:21:5d:f3:8b:8c
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 9 (2452 Mhz 11g)
country US authmode OPEN privacy OFF txpower 15 bmiss 10 scanvalid 60
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
protmode CTS wme bintval 0
[B]dmesg[/B]
iwn0: device timeout
iwn0: iwn5000_post_alive: could not configure WiMAX coexistence, error 35
iwn0: iwn_init_locked: could not initialize hardware, error 35
[B]debug[/B]
wlan0: ieee80211_vap_detach: STA parent iwn0
wlan0: stop running, 0 vaps running
wlan0: ieee80211_new_state_locked: INIT -> INIT (nrunning 0 nscanning 0)
wlan0: ieee80211_newstate_cb: INIT -> INIT arg -1
iwn_newstate: INIT -> INIT
wlan0: sta_newstate: INIT -> INIT (-1)
wlan0: sta_newstate: unexpected state transition INIT -> INIT
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0
wlan0: node_reclaim: remove 0xffffff8001cdb000<00:21:5d:f3:8b:8c> from station table, refcnt 1
wlan0: Ethernet address: 00:21:5d:f3:8b:8c
interrupt reg1=8000000 reg2=1
interrupt reg1=8000000 reg2=1
interrupt reg1=80000001 reg2=40010000
iwn_notif_intr: qid 0 idx 0 flags 0 type 0(UNKNOWN INTR NOTIF/CMD) len 0
iwn5000_ict_reset: enabling ICT
iwn5000_send_wimax_coex: Configuring WiMAX coexistence
iwn_cmd: IWN5000_CMD_WIMAX_COEX (0x5a) flags 0 qid 4 idx 0
interrupt reg1=80000000 reg2=0
iwn_notif_intr: qid 0 idx 0 flags 1 type 49(UNKNOWN INTR NOTIF/CMD) len 61
interrupt reg1=10000000 reg2=0
iwn0: iwn5000_post_alive: could not configure WiMAX coexistence, error 35
iwn0: iwn_init_locked: could not initialize hardware, error 35