Solved ZFS mirror disk won't mount

BlueNGray · Dec 20, 2021

When checking the status of a mirrored pool on my newly-updated FreeBSD 13.0-p5 system, I found a faulted disk. I know the disk has been working, but since it's been a while since I checked the status, I don't know how long it's been running degraded.

I detached the disk and attempted to re-attach it with zpool attach sys ada1p2 ada0p2, and it told me:

Code:

cannot attach ada0p2 to ada1p2: no such pool or dataset

I thought maybe the disk may not be responding, so I compared the smartctl output from ada0 and ada1, and they were comparable. I reran the short test and got no errors.

I next looked at the dmesg output and found:

Code:

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
ada0: Serial Number WD-WCC7K4NUH5TS
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 3815447MB (7814037168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
ada1: Serial Number WD-WCC7K4NUHF63
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors)
ada1: quirks=0x1<4K>
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <PNY CS900 240GB SSD CS900J13> ACS-4 ATA SATA 3.x device
ada2: Serial Number PNY501922800601095D9
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 228936MB (468862128 512 byte sectors)
ses0: pass2,ada2 in 'Slot 02', SATA Slot: scbus2 target 0
ses0: pass3,cd0 in 'Slot 04', SATA Slot: scbus4 target 0
uhub6: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub4: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
warning: total configured swap (976230337 pages) exceeds maximum recommended amount (12202040 pages).
warning: increase kern.maxswzone or reduce amount of swap.

(ada2 is my boot disk, ada0 and ada1 are the mirrored pool disks). Unfortunately, I didn't run a zpool status before the upgrade to 13.0, so I'm not sure whether this issue may have been present earlier and I just didn't see it.

I was concerned about the GEOM_PART message, so I compared the partition information on ada0 with ada1 and found them to be essentially the same.

I haven't replaced the drive (yet), but given the test results, I'm not convinced that it should be necessary to do so. What can I do to confirm this, and/or where should I proceed from here?

I'm also concerned about the swap configuration warning, and looking for suggestions for how to resolve that.

gpw928 · Dec 20, 2021

We need some more information to understand the situation. Please show us what you get from:

Code:

zpool status
gpart show
swapinfo

Also, are there any messages relating to the disks in /var/log/messages?

Code:

grep ada[01] /var/log/messages

Also, please run smartctl on the WD disks and look for anomalies:

Code:

smartctl -a ada0
smartctl -a ada1

mer · Dec 20, 2021

That first error message "no such pool or dataset" is odd. The implication is that "sys" is not a real "thing".
Output of the first 3 commands that gpw928 is important.

BlueNGray · Dec 20, 2021

Sure thing. But first let me say that I ran a non-destructive read test on ada0 which seemed to be able to access the disk with no problems:

dd if=/dev/ada0 of=/dev/null bs=1048576

Here is the output of the requested commands:

Code:

# zpoo[ status
  pool: sys
 state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
    still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
    the pool may no longer be accessible by software that does not support
    the features. See zpool-features(5) for details.
  scan: scrub repaired 0B in 03:06:36 with 0 errors on Tue May 18 22:38:40 2021
config:

    NAME        STATE     READ WRITE CKSUM
    sys         ONLINE       0     0     0
      ada1p2    ONLINE       0     0     0

errors: No known data errors

  pool: zroot
 state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
    still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
    the pool may no longer be accessible by software that does not support
    the features. See zpool-features(5) for details.
  scan: scrub repaired 0B in 00:00:34 with 0 errors on Tue May 18 19:06:32 2021
config:

    NAME        STATE     READ WRITE CKSUM
    zroot       ONLINE       0     0     0
      ada2p3    ONLINE       0     0     0

errors: No known data errors


# gpart show
=>        40  7814037088  ada0  GPT  (3.6T)
          40          88        - free -  (44K)
         128     4194304     1  freebsd-swap  (2.0G)
     4194432  7809842696     2  freebsd-zfs  (3.6T)

=>        40  7814037088  ada1  GPT  (3.6T)
          40          88        - free -  (44K)
         128     4194304     1  freebsd-swap  (2.0G)
     4194432  7809842696     2  freebsd-zfs  (3.6T)

=>       40  468862048  ada2  GPT  (224G)
         40       1024     1  freebsd-boot  (512K)
       1064        984        - free -  (492K)
       2048    4194304     2  freebsd-swap  (2.0G)
    4196352  464664576     3  freebsd-zfs  (222G)
  468860928       1160        - free -  (580K)

# swapinfo
Device          512-blocks     Used    Avail Capacity
/dev/ada0p2     7809842696        0 7809842696     0%


# grep ada[01] /var/log/messages
grep: No match.


# smartctl -a /dev/ada0
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD40EFRX-68N32N0
Serial Number:    WD-WCC7K4NUH5TS
LU WWN Device Id: 5 0014ee 2bc73b2ae
Firmware Version: 82.00A82
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Dec 20 08:26:57 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (43200) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 458) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x303d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   216   171   021    Pre-fail  Always       -       4200
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       82
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       17056
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       82
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       37
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       5395
194 Temperature_Celsius     0x0022   120   108   000    Old_age   Always       -       30
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17043         -
# 2  Short offline       Completed without error       00%      2525         -
# 3  Short offline       Completed without error       00%      2502         -
# 4  Short offline       Completed without error       00%      2478         -
# 5  Short offline       Completed without error       00%      2454         -
# 6  Short offline       Completed without error       00%      2430         -
# 7  Short offline       Completed without error       00%      2406         -
# 8  Short offline       Completed without error       00%      2381         -
# 9  Short offline       Completed without error       00%      2358         -
#10  Short offline       Completed without error       00%      2334         -
#11  Short offline       Completed without error       00%      2310         -
#12  Short offline       Completed without error       00%      2286         -
#13  Short offline       Completed without error       00%      2262         -
#14  Short offline       Completed without error       00%      2238         -
#15  Extended offline    Completed without error       00%      2224         -
#16  Short offline       Completed without error       00%      2214         -
#17  Short offline       Completed without error       00%      2190         -
#18  Short offline       Completed without error       00%      2166         -
#19  Short offline       Completed without error       00%      2142         -
#20  Short offline       Completed without error       00%      2118         -
#21  Short offline       Completed without error       00%      2094         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


# smartctl -a /dev/ada1
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD40EFRX-68N32N0
Serial Number:    WD-WCC7K4NUHF63
LU WWN Device Id: 5 0014ee 211c8937b
Firmware Version: 82.00A82
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Dec 20 08:27:20 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (43260) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 460) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x303d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   209   164   021    Pre-fail  Always       -       4525
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       83
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       17167
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       83
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       37
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       5346
194 Temperature_Celsius     0x0022   122   110   000    Old_age   Always       -       28
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2635         -
# 2  Short offline       Completed without error       00%      2612         -
# 3  Short offline       Completed without error       00%      2588         -
# 4  Short offline       Completed without error       00%      2564         -
# 5  Short offline       Completed without error       00%      2540         -
# 6  Short offline       Completed without error       00%      2516         -
# 7  Short offline       Completed without error       00%      2491         -
# 8  Short offline       Completed without error       00%      2468         -
# 9  Short offline       Completed without error       00%      2444         -
#10  Short offline       Completed without error       00%      2420         -
#11  Short offline       Completed without error       00%      2396         -
#12  Short offline       Completed without error       00%      2372         -
#13  Short offline       Completed without error       00%      2348         -
#14  Extended offline    Completed without error       00%      2334         -
#15  Short offline       Completed without error       00%      2324         -
#16  Short offline       Completed without error       00%      2300         -
#17  Short offline       Completed without error       00%      2276         -
#18  Short offline       Completed without error       00%      2252         -
#19  Short offline       Completed without error       00%      2228         -
#20  Short offline       Completed without error       00%      2204         -
#21  Short offline       Completed without error       00%      2180         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Thanks for your help!

BlueNGray · Dec 20, 2021

I thought it was strange that the grep resulted in "no match", so I went back to run two separate greps, one for each drive. ada1 doesn't show anything suspicious, but ada0 is a different story:

Code:

Jan  1 16:22:27 xxxxxxx kernel: ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
Jan  1 16:22:27 xxxxxxx kernel: ada0: <PNY CS900 240GB SSD CS900J13> ACS-4 ATA SATA 3.x device
Jan  1 16:22:27 xxxxxxx kernel: ada0: Serial Number PNY501922800601095D9
Jan  1 16:22:27 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan  1 16:22:27 xxxxxxx kernel: ada0: Command Queueing enabled
Jan  1 16:22:27 xxxxxxx kernel: ada0: 228936MB (468862128 512 byte sectors)
Jan  1 16:22:27 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 02', SATA Slot: scbus2 target 0
Jan  1 16:24:47 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jan  1 16:24:47 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jan  1 16:24:47 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jan  1 16:24:47 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan  1 16:24:47 xxxxxxx kernel: ada0: Command Queueing enabled
Jan  1 16:24:47 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jan  1 16:24:47 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jan  1 16:24:47 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jan  1 16:24:47 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jan  1 16:26:56 xxxxxxx kernel: ZFS WARNING: Unable to attach to ada0p2.
Jan  1 16:26:57 xxxxxxx kernel: ZFS WARNING: Unable to attach to ada0p2.
Jan  1 16:34:38 xxxxxxx kernel: ZFS WARNING: Unable to attach to ada0p2.
Jan  1 22:53:43 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jan  1 22:53:43 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jan  1 22:53:43 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jan  1 22:53:43 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan  1 22:53:43 xxxxxxx kernel: ada0: Command Queueing enabled
Jan  1 22:53:43 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jan  1 22:53:43 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jan  1 22:53:43 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jan  1 22:53:43 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jan  1 23:26:52 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jan  1 23:26:52 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jan  1 23:26:52 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jan  1 23:26:52 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan  1 23:26:52 xxxxxxx kernel: ada0: Command Queueing enabled
Jan  1 23:26:52 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jan  1 23:26:52 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jan  1 23:26:52 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jan  1 23:26:52 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jan  2 17:57:31 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jan  2 17:57:31 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jan  2 17:57:31 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jan  2 17:57:31 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan  2 17:57:31 xxxxxxx kernel: ada0: Command Queueing enabled
Jan  2 17:57:31 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jan  2 17:57:31 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jan  2 17:57:31 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jan  2 17:57:31 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jan  2 19:53:07 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jan  2 19:53:07 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jan  2 19:53:07 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jan  2 19:53:07 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan  2 19:53:07 xxxxxxx kernel: ada0: Command Queueing enabled
Jan  2 19:53:07 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jan  2 19:53:07 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jan  2 19:53:07 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jan  2 19:53:07 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jan  3 19:39:58 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jan  3 19:39:58 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jan  3 19:39:58 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jan  3 19:39:58 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan  3 19:39:58 xxxxxxx kernel: ada0: Command Queueing enabled
Jan  3 19:39:58 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jan  3 19:39:58 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jan  3 19:39:58 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jan  3 19:39:58 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jan 10 11:18:16 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jan 10 11:18:16 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jan 10 11:18:16 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jan 10 11:18:16 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jan 10 11:18:16 xxxxxxx kernel: ada0: Command Queueing enabled
Jan 10 11:18:16 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jan 10 11:18:16 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jan 10 11:18:16 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jan 10 11:18:16 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Feb 12 19:35:52 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Feb 12 19:35:52 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Feb 12 19:35:52 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Feb 12 19:35:52 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Feb 12 19:35:52 xxxxxxx kernel: ada0: Command Queueing enabled
Feb 12 19:35:52 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Feb 12 19:35:52 xxxxxxx kernel: ada0: quirks=0x1<4K>
Feb 12 19:35:52 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Feb 12 19:35:52 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Mar  9 16:34:12 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Mar  9 16:34:12 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Mar  9 16:34:12 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Mar  9 16:34:12 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Mar  9 16:34:12 xxxxxxx kernel: ada0: Command Queueing enabled
Mar  9 16:34:12 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Mar  9 16:34:12 xxxxxxx kernel: ada0: quirks=0x1<4K>
Mar  9 16:34:12 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Mar  9 16:34:12 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
May  3 13:45:04 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
May  3 13:45:04 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
May  3 13:45:04 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
May  3 13:45:04 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
May  3 13:45:04 xxxxxxx kernel: ada0: Command Queueing enabled
May  3 13:45:04 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
May  3 13:45:04 xxxxxxx kernel: ada0: quirks=0x1<4K>
May  3 13:45:04 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
May  3 13:45:04 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
May  3 14:23:32 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
May  3 14:23:32 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
May  3 14:23:32 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
May  3 14:23:32 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
May  3 14:23:32 xxxxxxx kernel: ada0: Command Queueing enabled
May  3 14:23:32 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
May  3 14:23:32 xxxxxxx kernel: ada0: quirks=0x1<4K>
May  3 14:23:32 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
May  3 14:23:32 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jun  6 07:26:01 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun  6 07:26:01 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jun  6 07:26:01 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jun  6 07:26:01 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun  6 07:26:01 xxxxxxx kernel: ada0: Command Queueing enabled
Jun  6 07:26:01 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jun  6 07:26:01 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jun  6 07:26:01 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jun  6 07:26:01 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jun  6 07:52:13 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun  6 07:52:13 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jun  6 07:52:13 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jun  6 07:52:13 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun  6 07:52:13 xxxxxxx kernel: ada0: Command Queueing enabled
Jun  6 07:52:13 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jun  6 07:52:13 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jun  6 07:52:13 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jun  6 07:52:13 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jun 18 06:28:14 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun 18 06:28:14 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jun 18 06:28:14 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jun 18 06:28:14 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 18 06:28:14 xxxxxxx kernel: ada0: Command Queueing enabled
Jun 18 06:28:14 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jun 18 06:28:14 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jun 18 06:28:14 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jun 18 06:28:14 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jun 29 16:43:23 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun 29 16:43:23 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jun 29 16:43:23 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jun 29 16:43:23 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 29 16:43:23 xxxxxxx kernel: ada0: Command Queueing enabled
Jun 29 16:43:23 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jun 29 16:43:23 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jun 29 16:43:23 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jun 29 16:43:23 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jun 30 09:38:27 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun 30 09:38:27 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jun 30 09:38:27 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jun 30 09:38:27 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 30 09:38:27 xxxxxxx kernel: ada0: Command Queueing enabled
Jun 30 09:38:27 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jun 30 09:38:27 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jun 30 09:38:27 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jun 30 09:38:27 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jun 30 12:25:29 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun 30 12:25:29 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jun 30 12:25:29 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jun 30 12:25:29 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 30 12:25:29 xxxxxxx kernel: ada0: Command Queueing enabled
Jun 30 12:25:29 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jun 30 12:25:29 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jun 30 12:25:29 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jun 30 12:25:29 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jul 16 14:25:10 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jul 16 14:25:10 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jul 16 14:25:10 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jul 16 14:25:10 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jul 16 14:25:10 xxxxxxx kernel: ada0: Command Queueing enabled
Jul 16 14:25:10 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jul 16 14:25:10 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jul 16 14:25:10 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jul 16 14:25:10 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Jul 31 21:56:44 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jul 31 21:56:44 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Jul 31 21:56:44 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Jul 31 21:56:44 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jul 31 21:56:44 xxxxxxx kernel: ada0: Command Queueing enabled
Jul 31 21:56:44 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Jul 31 21:56:44 xxxxxxx kernel: ada0: quirks=0x1<4K>
Jul 31 21:56:44 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Jul 31 21:56:44 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Aug 20 16:36:02 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Aug 20 16:36:02 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Aug 20 16:36:02 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Aug 20 16:36:02 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Aug 20 16:36:02 xxxxxxx kernel: ada0: Command Queueing enabled
Aug 20 16:36:02 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Aug 20 16:36:02 xxxxxxx kernel: ada0: quirks=0x1<4K>
Aug 20 16:36:02 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Aug 20 16:36:02 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Aug 27 18:28:21 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Aug 27 18:28:21 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Aug 27 18:28:21 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Aug 27 18:28:21 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Aug 27 18:28:21 xxxxxxx kernel: ada0: Command Queueing enabled
Aug 27 18:28:21 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Aug 27 18:28:21 xxxxxxx kernel: ada0: quirks=0x1<4K>
Aug 27 18:28:21 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Aug 27 18:28:21 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Sep 23 05:29:56 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Sep 23 05:29:56 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Sep 23 05:29:56 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Sep 23 05:29:56 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Sep 23 05:29:56 xxxxxxx kernel: ada0: Command Queueing enabled
Sep 23 05:29:56 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Sep 23 05:29:56 xxxxxxx kernel: ada0: quirks=0x1<4K>
Sep 23 05:29:56 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Sep 23 05:29:56 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Sep 23 12:14:38 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Sep 23 12:14:38 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Sep 23 12:14:38 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Sep 23 12:14:38 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Sep 23 12:14:38 xxxxxxx kernel: ada0: Command Queueing enabled
Sep 23 12:14:38 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Sep 23 12:14:38 xxxxxxx kernel: ada0: quirks=0x1<4K>
Sep 23 12:14:38 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Sep 23 12:14:38 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Sep 25 16:42:50 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Sep 25 16:42:50 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Sep 25 16:42:50 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Sep 25 16:42:50 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Sep 25 16:42:50 xxxxxxx kernel: ada0: Command Queueing enabled
Sep 25 16:42:50 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Sep 25 16:42:50 xxxxxxx kernel: ada0: quirks=0x1<4K>
Sep 25 16:42:50 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Sep 25 16:42:50 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Dec 17 13:52:20 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Dec 17 13:52:20 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Dec 17 13:52:20 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Dec 17 13:52:20 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Dec 17 13:52:20 xxxxxxx kernel: ada0: Command Queueing enabled
Dec 17 13:52:20 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Dec 17 13:52:20 xxxxxxx kernel: ada0: quirks=0x1<4K>
Dec 17 13:52:20 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Dec 17 13:52:20 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Dec 17 14:08:01 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Dec 17 14:08:01 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Dec 17 14:08:01 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Dec 17 14:08:01 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Dec 17 14:08:01 xxxxxxx kernel: ada0: Command Queueing enabled
Dec 17 14:08:01 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Dec 17 14:08:01 xxxxxxx kernel: ada0: quirks=0x1<4K>
Dec 17 14:08:01 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Dec 17 14:08:01 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Dec 17 14:08:01 xxxxxxx kernel: ZFS WARNING: Unable to attach to ada0p2.
Dec 19 17:33:26 xxxxxxx kernel: ZFS WARNING: Unable to attach to ada0p2.
Dec 19 18:08:34 xxxxxxx kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Dec 19 18:08:34 xxxxxxx kernel: ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
Dec 19 18:08:34 xxxxxxx kernel: ada0: Serial Number WD-WCC7K4NUH5TS
Dec 19 18:08:34 xxxxxxx kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Dec 19 18:08:34 xxxxxxx kernel: ada0: Command Queueing enabled
Dec 19 18:08:34 xxxxxxx kernel: ada0: 3815447MB (7814037168 512 byte sectors)
Dec 19 18:08:34 xxxxxxx kernel: ada0: quirks=0x1<4K>
Dec 19 18:08:34 xxxxxxx kernel: ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Dec 19 18:08:34 xxxxxxx kernel: GEOM_PART: Partition 'ada0p2' not suitable for kernel dumps (wrong type?)
Dec 19 18:10:46 xxxxxxx ZFS[1166]: vdev problem, zpool=sys path=/dev/ada0p2 type=ereport.fs.zfs.vdev.open_failed
Dec 19 19:22:58 xxxxxxx ZFS[1357]: vdev problem, zpool=sys path=/dev/ada0p2 type=ereport.fs.zfs.vdev.open_failed

This is very strange, since I KNOW that I've run the zpool status on the pool in the past and saw it indicate both drives. Maybe just not as recently as I thought.

Looks like I need to be a bit more frequently proactive about checking on this system. Once I figure out what is going on.

covacat · Dec 20, 2021

is ada0p2 used for swap in fstab ?

BlueNGray · Dec 20, 2021

Good catch. Yes. I'm assuming I should be using ada0p1 and/or ada1p1. Is it ok to enter them both as swap?

BlueNGray · Dec 20, 2021

Bingo! Changed fstab to use ada0p1 and ada1p1 as swap and rebooted. Then I attached ada0p2 and zpool status showed ada1p2 and ada0p2 as a mirror, and resilvering is now in progress. swapinfo now looks more sane.

I'm not sure where the fstab entry naming ada0p2 as swap came from. The only thing I can think of is that in the process of some update when configuration files were being updated to current ones that some confusion occurred and the wrong partition got selected.

At any rate, I appreciate the help.

mer · Dec 20, 2021

"Example 56782 as to why you should use labels instead of raw partition devices in ZFS vdevs"

BlueNGray · Dec 20, 2021

mer said:
"Example 56782 as to why you should use labels instead of raw partition devices in ZFS vdevs"

Hadn't heard this before. Is this mentioned in some documentation I missed, or just common knowledge among people more experienced than I?

mer · Dec 20, 2021

A lot of the ZFS threads around "best practices" talk about it. Books by various authors recommend it also, not just for ZFS but works for UFS too.
Basically, use gpart to add a label to the partition, then instead of using /dev/ada0p2 you can use /dev/gpt/zfspart1 (where zfspart1 would be the label you gave it using gpart).
Just need to be careful about "geom withering".
When the devices are first detected they can create multiple nodes in /dev.
one is the standard ada0p2 type
one is based on the gpt labels created with gpart that live under /dev/gpt (there is a sysctl to enable/disable this)
one is based on "diskid" that lives under /dev/diskid (sysctl to enable/disable this)

The first exclusive use makes the others disappear. Exclusive use is something like mounting or adding it to a vdev. If you use /dev/ada0p2 when you zpool attach to the vdev, the others go away. If you use /dev/gpt/zfspart1 in the zpool attach, then you don't see /dev/ada0p2.
It's nice using the labels because if you plug something into a different port, ZFS still finds it and works correctly.
If you make your labels smart like say the serial number of the disk, when you need to replace it, you can find it easier.

gpw928 · Dec 20, 2021

Good to see it worked out. The arguments for labels are pretty good. Here is my tank, with the name mappings:

Code:

[sherman.141] $ zpool status tank         
  pool: tank
 state: ONLINE
  scan: scrub repaired 0B in 05:59:38 with 0 errors on Thu Dec 16 12:45:12 2021
config:

    NAME                     STATE     READ WRITE CKSUM
    tank                     ONLINE       0     0     0
      raidz2-0               ONLINE       0     0     0
        gpt/L0:ZC135AE5      ONLINE       0     0     0
        gpt/L1:ZC1564PG      ONLINE       0     0     0
        gpt/L2:ZC1AKXQM      ONLINE       0     0     0
        gpt/L3:WCC4N5CVZ6V4  ONLINE       0     0     0
        gpt/L4:ZC12LHRD      ONLINE       0     0     0
        gpt/L5:WMC1T2195505  ONLINE       0     0     0
        gpt/L6:WMC1T1408153  ONLINE       0     0     0

errors: No known data errors

[sherman.142] $ for n in 0 1 2 3 4 5 6
do
    echo -n "da$n: "
    camcontrol identify da$n | grep "serial number"
done
da0: serial number         WD-WMC1T1408153
da1: serial number         WD-WMC1T2195505
da2: serial number         WD-WCC4N5CVZ6V4
da3: serial number         ZC1564PG
da4: serial number         ZC135AE5
da5: serial number         ZC1AKXQM
da6: serial number         ZC12LHRD

#  On each spindle, I created partition 1 as a zfs partition and applied the label 
[sherman.143] $ gpart show -l /dev/da[0-9]   
=>        40  5860533088  da0  GPT  (2.7T)
          40  5860533088    1  L6:WMC1T1408153  (2.7T)

=>        40  5860533088  da1  GPT  (2.7T)
          40  5860533088    1  L5:WMC1T2195505  (2.7T)

=>        40  5860533088  da2  GPT  (2.7T)
          40  5860533088    1  L3:WCC4N5CVZ6V4  (2.7T)

=>        40  5860533088  da3  GPT  (2.7T)
          40  5860533088    1  L1:ZC1564PG  (2.7T)

=>        40  5860533088  da4  GPT  (2.7T)
          40  5860533088    1  L0:ZC135AE5  (2.7T)

=>        40  7814037088  da5  GPT  (3.6T)
          40  7814037088    1  L2:ZC1AKXQM  (3.6T)

=>        40  5860533088  da6  GPT  (2.7T)
          40  5860533088    1  L4:ZC12LHRD  (2.7T)

So the devices that compose the raidz2 VDEV used in the tank pool have their location (L0 means bottom of the stack) and serial number encoded.

So if I ever have to pull a disk, I will be be able to quickly identify which one with a very high level of confidence.

tingo · Dec 21, 2021

BlueNGray said:
I don't know how long it's been running degraded.

running zpool history -i ... on that pool might tell you.

BlueNGray · Dec 22, 2021

Doesn't really help. No messages in there mentioning any specific disk until I detached ada0p2 and started trying to re-attach it, and no sign of any errors.

The /var/log/messages file indicates partition and swap size issues with ada0p2 as far back as 1 January 2021. I believe this was the date on which I installed a new boot disk and did a clean installation of FreeBSD 12.2. I'm going to assume that I somehow managed to specify the wrong swap partition when I did the installation.

This pool was originally built on a FreeNAS server running FreeBSD 11.2-STABLE. I switched to straight FreeBSD in about March 2020, but kept using a pair of USB thumb drives to boot from, as was customary with FreeNAS. After having issues with one of the boot thumb drives, I decided to go to a small SATA SSD as the boot drive.

At any rate, I'm just relieved that the problem is resolved, and I guess at this point it really doesn't matter how long it had been running degraded. I just didn't realize I was on a tightrope without a safety net!

I'll probably play around with the partition labeling suggested earlier.

Thanks for all the comments, everyone!