hello, everybody!
There is freeBSD 7.1. There is usb wifi adapter TrendNet TEW-444UB (chipset AR5523).
How right mix them?
So, there is my steps.
#usbdevs:
this mean that adapter is detected, i think.
loading of ath module don't help.
dmesg log:
Then i try to use ndisgen. Using two files "NET5523.INF" и "Ar5523.sys" with or without "ar5523.bin".
Then #kldload ./ar5523_sys.ko... And dmesg keep silence.
Also i try to implement this patch and recompile driver with ndisgen - but all in vain ))
what is my problem? I think that this involves with USB support ).
Thanks In Advance
There is freeBSD 7.1. There is usb wifi adapter TrendNet TEW-444UB (chipset AR5523).
How right mix them?
So, there is my steps.
#usbdevs:
Code:
...
ugen0: <Atheros Communications Inc AR5523, class 255/0, rev 2.00/0.01, addr 2> on uhub1
...
loading of ath module don't help.
dmesg log:
Code:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (737.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX
,FXSR,
SSE>
real memory = 536784896 (511 MB)
avail memory = 502894592 (479 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <ASUS CUSL2> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xde000000-0xdeffffff,0xe0000000-0xefffffff,0xdd000000-0xddffffff irq 11 at device 0.0 on
pci1
nvidia0: <Unknown> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <multimedia, audio> at device 11.0 (no driver attached)
pci2: <input device> at device 11.1 (no driver attached)
pci2: <multimedia> at device 12.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xdc000000-0xdc0000ff irq 9 at
device 13.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:00:21:ec:5b:e2
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb800-0xb80f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 5 at device
31.2 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device
31.4 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub0
ums0: 3 buttons and Z dir.
ugen0: <Atheros Communications Inc AR5523, class 255/0, rev 2.00/0.01, addr 2> on uhub1
uhub2: <ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 3> on uhub1
uhub2: 4 ports with 4 removable, self powered
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/57.01, addr 4> on uhub2
ums1: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/57.01, addr 4> on uhub2
Timecounter "TSC" frequency 737022841 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114473MB <WDC WD1200JB-00FUA0 15.05R15> at ata0-master UDMA100
acd0: DVDROM <DV-516D 0106/E1.06> at ata1-slave UDMA33
Trying to mount root from ufs:/dev/ad0s2a
rl0: link state changed to UP
interface if_ath.1 already present in the KLD 'kernel'!
Then i try to use ndisgen. Using two files "NET5523.INF" и "Ar5523.sys" with or without "ar5523.bin".
Then #kldload ./ar5523_sys.ko... And dmesg keep silence.
Also i try to implement this patch and recompile driver with ndisgen - but all in vain ))
what is my problem? I think that this involves with USB support ).
Thanks In Advance