Solved [Solved] Problem after upgrading... how to disable USB?

Hi all,

Just trying to get some of my legacy systems upgraded (using freebsd-update(8)). Managed to get to 7.4 without issue (really surprised about that). Then going from 7.4->9.2 using freebsd-update(8). It seems to be fine except it hangs on boot always here:

Code:
p4tcc1: <CPU Frequency Thermal Control> on cpu1                                 
Timecounters tick every 1.000 msec                                              
usbus0: 12Mbps Full Speed USB v1.0                                              
ugen0.1: <0x1166> at usbus0                                                     
uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0

I have a feeling this might be related to the Legacy USB support, however on the serial console I get to the ROM BIOS Setup Util (it's an HP360R2 or R3 - (P4 3G)). Unlike other BIOSs it gives a RBSU prompt which is extremely difficult to navigate as the console does not overwrite previously written characters with a whitespace when refreshing the screen... so I am unable to locate the parameter to see if the USB is set to legacy or not.

Now I don't use USB on the server at all, so is there a way to disable it completely (without rebuilding the kernel) .. ie in device.hints? Currently I have managed to get it to boot by using the boot configuration menu and disabling ACPI and booting Safe Mode (option 5, then options 1 & 2)

Thanks in advance.

Michelle
 
Re: Problem after upgrading... how to disable USB?

On what kind of hardware are you running this? Have you checked to see if there's a BIOS update? Sometimes those help.
 
Re: Problem after upgrading... how to disable USB?

As in the previous.. it's a HP DL360R2 (or R3) and no BIOS updates are available.
 
Re: Problem after upgrading... how to disable USB?

Actually this is a similar problem: https://forums.freebsd.org/viewtopic.php?&t=9586 ... I need to do the same, different hardware, same reason..

So if I have read it correctly it might be that the hang is on the ohci driver load, so moving the module out of the way should solve it (or make it unbootable)..

Question can the usb module be disabled in the same way? (I suspect it cannot as the kernel conf say 'required' next to the USB driver.)

Regards,

Michelle
 
Re: Problem after upgrading... how to disable USB?

OK, more progress... managed to get the menu driven BIOS interface enabled over the console.. no USB legacy support.

Set:

Code:
hint.usb.0.disabled="1"
hint.ohci.0.disabled="1"

(don't know whether they are even valid, but thought I'd try)

In the BIOS Config set the USB controller to disabled (there is no USB config options so just disabled the embedded controller)

Now it boots and hangs to the following:

Code:
cpu0 on motherboard                                                             
p4tcc0: <CPU Frequency Thermal Control> on cpu0                                 
eisa0: <EISA bus> on motherboard                                                
mainboard0: <CPQ0733 (System Board)> at slot 0 on eisa0                         
pmtimer0 on isa0                                                                
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff
,0xd0000-0xd17ff,0xee000-0xeffff pnpid ORM0000 on isa0                          
sc0: <System console> at flags 0x100 on isa0                                    
sc0: VGA <16 virtual consoles, flags=0x300>                                     
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0       
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0                
atkbd0: <AT Keyboard> irq 1 on atkbdc0                                          
kbd0 at atkbd0                                                                  
atkbd0: [GIANT-LOCKED]                                                          
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0                          
Event timer "RTC" frequency 32768 Hz quality 0                                  
attimer0: <AT timer> at port 0x40 on isa0                                       
Timecounter "i8254" frequency 1193182 Hz quality 0                              
Event timer "i8254" frequency 1193182 Hz quality 100                            
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0                                       
ppc0: parallel port not found.                                                  
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0       
Timecounters tick every 1.000 msec

So perhaps it wasn't the USB, but something else that follows it... what comes next anyone?

Thanks,

Michelle
 
Re: Problem after upgrading... how to disable USB?

Ok solution found (posting so others may note).

First - disable the Embedded USB controller in the BIOS configuration.
Second - edit the /boot/device.hints and add the following:

Code:
hint.ata.0.disabled="1"
hint.ata.1.disabled="1"

Ensure any array controllers are enabled (disabling the array controllers will also result in a hang when trying to probe CISS devices.)

Boot with verbose mode to verify.. my boot now shows:

Code:
MP Configuration Table version 1.4 found at 0xc00f28bd
Table 'FACP' at 0x9fffa040
Table 'APIC' at 0x9fffa100
APIC: Found table at 0x9fffa100
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 4 ACPI ID 4: disabled
MADT: Found CPU APIC ID 6 ACPI ID 6: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: disabled
MADT: Found CPU APIC ID 5 ACPI ID 5: disabled
MADT: Found CPU APIC ID 7 ACPI ID 7: enabled
SMP: Added CPU 7 (AP)
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-RELEASE-p3 #0: Sat Jan 11 02:38:15 UTC 2014
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "/boot/kernel/kernel" at 0xc1607000.
Calibrating TSC clock ... TSC clock: 3065863556 Hz
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3065.86-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Family = 0xf  Model = 0x2  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNXT-ID,xTPR>

Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size
real memory  = 2684354560 (2560 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001826000 - 0x000000009d28efff, 2611384320 bytes (637545 pages)
avail memory = 2609868800 (2488 MB)
INTR: Adding local APIC 0 as a target
Event timer "LAPIC" quality 400
ACPI APIC Table: <COMPAQ 00000083>
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  6
 cpu1 (AP/HT): APIC ID:  7
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x94
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 6
APIC: CPU 1 has ACPI ID 7
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf4f70 00014 (v00 COMPAQ)
ACPI: RSDT 0x9fffa000 00030 (v01 COMPAQ P31      00000002   ?? 0000162E)
ACPI: FACP 0x9fffa040 00074 (v01 COMPAQ P31      00000002   ?? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-638)
ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 (20110527/tbfadt-638)
ACPI: DSDT 0x9fffa240 0318A (v01 COMPAQ     DSDT 00000001 MSFT 0100000B)
ACPI: FACS 0x9fffa0c0 00040
ACPI: APIC 0x9fffa100 000AC (v01 COMPAQ 00000083 00000002      00000000)
ACPI: SPCR 0x9fffa1c0 00050 (v01 COMPAQ SPCRRBSU 00000001   ?? 0000162E)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000
MADT: Found IO APIC ID 5, Interrupt 48 at 0xfec03000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic3 <Version 1.1> irqs 48-63 on motherboard
cpu0 BSP:
     ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
VESA: INT 0x10 vector 0xc000:0x1423
VESA: information block
0000   56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00
0010   00 01 7f 00 00 01 0b 01 00 01 21 01 00 01 2a 01
0020   00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01
0030   14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01
0040   1a 01 1b 01 02 03 03 03 04 03 02 02 0d 01 0e 01
0050   0f 01 12 02 13 02 14 02 15 02 22 02 23 02 24 02
0060   25 02 32 02 33 02 34 02 35 02 42 02 43 02 44 02
0070   45 02 0b 01 0c 01 ff ff 00 00 00 00 00 00 00 00
0080   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0090   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100   41 54 49 20 4d 41 43 48 36 34 00 41 54 49 20 54
0110   65 63 68 6e 6f 6c 6f 67 69 65 73 20 49 6e 63 2e
0120   00 4d 41 43 48 36 34 47 4d 00 30 31 2e 30 30 00
0130   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 42 mode(s) found
VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc6b0d022 (1000022)
VESA: ATI MACH64
VESA: ATI Technologies Inc. MACH64GM 01.00
io: <I/O>
hptnr: R750/DC7280 controller driver v1.0
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <COMPAQ P31> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 6 vector 48
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc6b31000 pa 0x2000
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=00141166)
pcibios: BIOS version 2.10
ACPI: Processor \134_PR_.CPU0 (ACPI ID 0) ignored
ACPI: Processor \134_PR_.CPU1 (ACPI ID 1) ignored
ACPI: Processor \134_PR_.CPU2 (ACPI ID 2) ignored
ACPI: Processor \134_PR_.CPU3 (ACPI ID 3) ignored
ACPI: Processor \134_PR_.CPU4 (ACPI ID 4) ignored
ACPI: Processor \134_PR_.CPU5 (ACPI ID 5) ignored
cpu0: Processor \134_PR_.CPU6 (ACPI ID 6) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: Processor \134_PR_.CPU7 (ACPI ID 7) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 6 vector 49
Event timer "i8254" frequency 1193182 Hz quality 100
ACPI timer: 0/5 0/5 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 8
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  4 5 7 10 11 15
  Validation          0    7   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  4 5 7 10 11 15
  Validation          0    5   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  4 5 7 10 11 15
  Validation          0   10   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  4 5 7 10 11 15
  Validation          0   15   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  4 5 7 10 11 15
  Validation          0   11   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link18:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pci_link19:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 5 7 10 11 15
  Validation          0  255   N     0  4 5 7 10 11 15
  After Disable       0  255   N     0  4 5 7 10 11 15
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: decoding 4 range 0-0xcff
pcib0: Length mismatch for 4 range: 2d00 vs 2cff
pcib0: decoding 4 range 0-0x2cff
pcib0: decoding 4 range 0x3b0-0x3bb
pcib0: decoding 4 range 0x3c0-0x3df
pcib0: decoding 3 range 0xf5d00000-0xf6ffffff
pcib0: decoding 3 range 0xa0000-0xbffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1166, dev=0x0014, revid=0x32
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0014, revid=0x00
	domain=0, bus=0, slot=0, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0014, revid=0x00
	domain=0, bus=0, slot=0, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4752, revid=0x27
	domain=0, bus=0, slot=3, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf6000000, size 24, enabled
pcib0: allocated type 3 (0xf6000000-0xf6ffffff) for rid 10 of pci0:0:3:0
	map[14]: type I/O Port, range 32, base 0x2400, size  8, enabled
pcib0: allocated type 4 (0x2400-0x24ff) for rid 14 of pci0:0:3:0
	map[18]: type Memory, range 32, base 0xf5ff0000, size 12, enabled
pcib0: allocated type 3 (0xf5ff0000-0xf5ff0fff) for rid 18 of pci0:0:3:0
found->	vendor=0x0e11, dev=0xb178, revid=0x01
	domain=0, bus=0, slot=4, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 2 messages, 64 bit
	map[10]: type Memory, range 64, base 0xf5f80000, size 18, enabled
pcib0: allocated type 3 (0xf5f80000-0xf5fbffff) for rid 10 of pci0:0:4:0
	map[18]: type I/O Port, range 32, base 0x2800, size  8, enabled
pcib0: allocated type 4 (0x2800-0x28ff) for rid 18 of pci0:0:4:0
	map[1c]: type Prefetchable Memory, range 64, base 0xf5df0000, size 14, enabled
pcib0: allocated type 3 (0xf5df0000-0xf5df3fff) for rid 1c of pci0:0:4:0
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 31
found->	vendor=0x0e11, dev=0xb203, revid=0x01
	domain=0, bus=0, slot=5, func=0
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x1800, size  8, enabled
pcib0: allocated type 4 (0x1800-0x18ff) for rid 10 of pci0:0:5:0
	map[14]: type Memory, range 32, base 0xf5f70000, size  9, enabled
pcib0: allocated type 3 (0xf5f70000-0xf5f701ff) for rid 14 of pci0:0:5:0
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 23
found->	vendor=0x0e11, dev=0xb204, revid=0x01
	domain=0, bus=0, slot=5, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x2c00, size  8, enabled
pcib0: allocated type 4 (0x2c00-0x2cff) for rid 10 of pci0:0:5:2
	map[14]: type Memory, range 32, base 0xf5f60000, size 11, enabled
pcib0: allocated type 3 (0xf5f60000-0xf5f607ff) for rid 14 of pci0:0:5:2
	map[18]: type Memory, range 32, base 0xf5f50000, size 13, enabled
pcib0: allocated type 3 (0xf5f50000-0xf5f51fff) for rid 18 of pci0:0:5:2
	map[1c]: type Memory, range 32, base 0xf5e80000, size 19, enabled
pcib0: allocated type 3 (0xf5e80000-0xf5efffff) for rid 1c of pci0:0:5:2
pcib0: matched entry for 0.5.INTB
pcib0: slot 5 INTB hardwired to IRQ 22
found->	vendor=0x1166, dev=0x0201, revid=0x93
	domain=0, bus=0, slot=15, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0212, revid=0x93
	domain=0, bus=0, slot=15, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=1
	cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:15:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:15:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:15:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:15:1
	map[20]: type I/O Port, range 32, base 0x2000, size  4, enabled
pcib0: allocated type 4 (0x2000-0x200f) for rid 20 of pci0:0:15:1
found->	vendor=0x1166, dev=0x0225, revid=0x00
	domain=0, bus=0, slot=15, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0101, revid=0x05
	domain=0, bus=0, slot=17, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0101, revid=0x05
	domain=0, bus=0, slot=17, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
vgapci0: <VGA-compatible display> port 0x2400-0x24ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci0
ciss0: <Compaq Smart Array 5i> port 0x2800-0x28ff mem 0xf5f80000-0xf5fbffff,0xf5df0000-0xf5df3fff irq 31 at device 4.0 on pci0
ciss0: PERFORMANT Transport
ioapic1: routing intpin 15 (PCI IRQ 31) to lapic 6 vector 50
ciss0: using 1024 of 1024 available commands
ciss0:   1 logical drive configured
ciss0:   firmware 2.36
ciss0:   2 SCSI channels
ciss0:   signature 'CISS'
ciss0:   valence 1
ciss0:   supported I/O methods 0xe<simple,performant,MEMQ>
ciss0:   active I/O method 0x5<performant>
ciss0:   4G page base 0x00000000
ciss0:   interrupt coalesce delay 0us
ciss0:   interrupt coalesce count 16
ciss0:   max outstanding commands 1024
ciss0:   bus types 0x2<ultra3>
ciss0:   server name ''
ciss0:   heartbeat 0x300001c0
ciss0:   max logical logical volumes: 16
ciss0:   max physical disks supported: 1024
ciss0:   max physical disks per logical volume: 0
ciss0: 3 physical devices
ciss0: 1 logical drive
ciss0: logical drive (b0t0): RAID 1(1+0), 34304MB online
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0
ata0: disabled via hints entry
ata1: disabled via hints entry
pcib1: <ACPI Host-PCI bridge> on acpi0
pcib1: Length mismatch for 4 range: 100 vs ff
pcib1: decoding 4 range 0x3000-0x30ff
pcib1: decoding 3 range 0xf7e00000-0xf7efffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x0e11, dev=0x0046, revid=0x01
	domain=0, bus=1, slot=1, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D3  current D0
	map[10]: type Memory, range 64, base 0xf7ef0000, size 13, enabled
pcib1: allocated type 3 (0xf7ef0000-0xf7ef1fff) for rid 10 of pci0:1:1:0
	map[18]: type I/O Port, range 32, base 0x3000, size  8, enabled
pcib1: allocated type 4 (0x3000-0x30ff) for rid 18 of pci0:1:1:0
	map[1c]: type Memory, range 64, base 0xf7e80000, size 18, enabled
pcib1: allocated type 3 (0xf7e80000-0xf7ebffff) for rid 1c of pci0:1:1:0
pcib1: matched entry for 1.1.INTA
pcib1: slot 1 INTA hardwired to IRQ 28
found->	vendor=0x14e4, dev=0x16a7, revid=0x02
	domain=0, bus=1, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xf7e70000, size 16, enabled
pcib1: allocated type 3 (0xf7e70000-0xf7e7ffff) for rid 10 of pci0:1:2:0
pcib1: matched entry for 1.2.INTA
pcib1: slot 2 INTA hardwired to IRQ 30
ciss1: <HP Smart Array 642> port 0x3000-0x30ff mem 0xf7ef0000-0xf7ef1fff,0xf7e80000-0xf7ebffff irq 28 at device 1.0 on pci1
ciss1: PERFORMANT Transport
ciss1: got 0 MSI messages]
ioapic1: routing intpin 12 (PCI IRQ 28) to lapic 6 vector 51
ciss1: using 1024 of 1024 available commands
ciss1:   1 logical drive configured
ciss1:   firmware 1.30
ciss1:   2 SCSI channels
ciss1:   signature 'CISS'
ciss1:   valence 1
ciss1:   supported I/O methods 0x80000006<simple,performant>
ciss1:   active I/O method 0x5<performant>
ciss1:   4G page base 0x00000000
ciss1:   interrupt coalesce delay 0us
ciss1:   interrupt coalesce count 16
ciss1:   max outstanding commands 1024
ciss1:   bus types 0x2<ultra3>
ciss1:   server name ''
ciss1:   heartbeat 0x100001d4
ciss1:   max logical logical volumes: 16
ciss1:   max physical disks supported: 1024
ciss1:   max physical disks per logical volume: 0
ciss1: 12 physical devices
ciss1: 1 logical drive
ciss1: logical drive (b0t0): RAID 5, 624640MB online
pci0:1:2:0: bad VPD cksum, remain 223
bge0: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x001002> mem 0xf7e70000-0xf7e7ffff irq 30 at device 2.0 on pci1
bge0: CHIP ID 0x00001002; ASIC REV 0x01; CHIP REV 0x10; PCI-X 100 MHz
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: OUI 0x001018, model 0x0016, rev. 2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:0b:cd:fd:99:29
ioapic1: routing intpin 14 (PCI IRQ 30) to lapic 6 vector 52
pcib2: <ACPI Host-PCI bridge> on acpi0
pcib2: decoding 3 range 0xf7f00000-0xf7ffffff
pci4: <ACPI PCI bus> on pcib2
pci4: domain=0, physical bus=4
found->	vendor=0x14e4, dev=0x16a7, revid=0x02
	domain=0, bus=4, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=15
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xf7ff0000, size 16, enabled
pcib2: allocated type 3 (0xf7ff0000-0xf7ffffff) for rid 10 of pci0:4:2:0
pcib2: matched entry for 4.2.INTA
pcib2: slot 2 INTA hardwired to IRQ 29
pci0:4:2:0: bad VPD cksum, remain 223
bge1: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x001002> mem 0xf7ff0000-0xf7ffffff irq 29 at device 2.0 on pci4
bge1: CHIP ID 0x00001002; ASIC REV 0x01; CHIP REV 0x10; PCI-X 100 MHz
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: OUI 0x001018, model 0x0016, rev. 2
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: bpf attached
bge1: Ethernet address: 00:0b:cd:fd:99:2b
ioapic1: routing intpin 13 (PCI IRQ 29) to lapic 6 vector 53
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 6 vector 54
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 6 vector 55
uart0: fast interrupt
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff,0xee000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 6 vector 56
Event timer "RTC" frequency 32768 Hz quality 0
ppc0: parallel port not found.
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66648172 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
(probe0:ciss0:0:0:0): Down reving Protocol Version from 2 to 0?
(probe1:ciss1:0:0:0): Down reving Protocol Version from 2 to 0?
pass0 at ciss0 bus 0 scbus0 target 0 lun 0
pass0: <COMPAQ RAID 1(1+0) OK> Fixed Direct Access SCSI-0 device 
pass0: 135.168MB/s transfers
pass0: Command Queueing enabled
pass1 at ciss1 bus 0 scbus2 target 0 lun 0
pass1: <COMPAQ RAID 5 OK> Fixed Direct Access SCSI-0 device 
pass1: 135.168MB/s transfers
pass1: Command Queueing enabled
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID 1(1+0) OK> Fixed Direct Access SCSI-0 device 
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
da0: quirks=0x1<NO_SYNC_CACHE>
da0: Delete methods: <NONE(*)>
GEOM: new disk da0
da1 at ciss1 bus 0 scbus2 target 0 lun 0
da1: <COMPAQ RAID 5 OK> Fixed Direct Access SCSI-0 device 
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 625142MB (1280292480 512 byte sectors: 255H 63S/T 65535C)
da1: quirks=0x1<NO_SYNC_CACHE>
da1: Delete methods: <NONE(*)>
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1532931778 Hz quality -100
GEOM: new disk da1
Trying to mount root from ufs:/dev/da0s1a [rw]...
start_init: trying /sbin/init

Solved.
 
Back
Top