[ 56.774] X.Org X Server 1.20.9 X Protocol Version 11, Revision 0 [ 56.774] Build Operating System: FreeBSD 12.2-RELEASE amd64 [ 56.774] Current Operating System: FreeBSD freebsd.rooty 12.2-RELEASE FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [ 56.774] Build Date: 09 December 2020 05:04:43PM [ 56.774] [ 56.774] Current version of pixman: 0.40.0 [ 56.774] Before reporting problems, check
http://wiki.x.org to make sure that you have the latest version. [ 56.774] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 56.774] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 11 19:54:04 2020 [ 56.873] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 56.893] (==) No Layout section. Using the first Screen section. [ 56.894] (==) No screen section available. Using defaults. [ 56.894] (**) |-->Screen "Default Screen Section" (0) [ 56.894] (**) | |-->Monitor "" [ 56.894] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 56.894] (==) Automatically adding devices [ 56.894] (==) Automatically enabling devices [ 56.894] (==) Not automatically adding GPU devices [ 56.906] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 57.009] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, catalogue:/usr/local/etc/X11/fontpath.d [ 57.009] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 57.009] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 57.009] (II) Loader magic: 0x434a80 [ 57.009] (II) Module ABI versions: [ 57.009] X.Org ANSI C Emulation: 0.4 [ 57.009] X.Org Video Driver: 24.1 [ 57.009] X.Org XInput driver : 24.1 [ 57.009] X.Org Server Extension : 10.0 [ 57.021] (--) PCI:*(0@0:1:0) 1002:98e4:1028:078e rev 210, Mem @ 0xe8000000/134217728, 0xf0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/65536 [ 57.032] (II) LoadModule: "glx" [ 57.076] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 57.288] (II) Module glx: vendor="X.Org Foundation" [ 57.288] compiled for 1.20.9, module version = 1.0.0 [ 57.288] ABI class: X.Org Server Extension, version 10.0 [ 57.289] (==) Matched ati as autoconfigured driver 0 [ 57.289] (==) Matched modesetting as autoconfigured driver 1 [ 57.289] (==) Matched scfb as autoconfigured driver 2 [ 57.289] (==) Matched vesa as autoconfigured driver 3 [ 57.289] (==) Assigned the driver to the xf86ConfigLayout [ 57.289] (II) LoadModule: "ati" [ 57.314] (WW) Warning, couldn't open module ati [ 57.314] (EE) Failed to load module "ati" (module does not exist, 0) [ 57.314] (II) LoadModule: "modesetting" [ 57.314] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 57.335] (II) Module modesetting: vendor="X.Org Foundation" [ 57.335] compiled for 1.20.9, module version = 1.20.9 [ 57.335] Module class: X.Org Video Driver [ 57.335] ABI class: X.Org Video Driver, version 24.1 [ 57.335] (II) LoadModule: "scfb" [ 57.335] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 57.343] (II) Module scfb: vendor="X.Org Foundation" [ 57.343] compiled for 1.20.9, module version = 0.0.5 [ 57.343] ABI class: X.Org Video Driver, version 24.1 [ 57.343] (II) LoadModule: "vesa" [ 57.343] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 57.345] (II) Module vesa: vendor="X.Org Foundation" [ 57.345] compiled for 1.20.9, module version = 2.5.0 [ 57.345] Module class: X.Org Video Driver [ 57.345] ABI class: X.Org Video Driver, version 24.1 [ 57.345] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 57.345] (II) scfb: driver for wsdisplay framebuffer: scfb [ 57.345] (II) VESA: driver for VESA chipsets: vesa [ 57.345] (--) Using syscons driver with X support (version 2.0) [ 57.345] (--) using VT number 9 [ 57.371] (EE) open /dev/dri/card0: No such file or directory [ 57.371] (WW) Falling back to old probe method for modesetting [ 57.371] (EE) open /dev/dri/card0: No such file or directory [ 57.371] (WW) Falling back to old probe method for scfb [ 57.371] scfb trace: probe start [ 57.371] scfb trace: probe done [ 57.371] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 57.371] (EE) Screen 0 deleted because of no matching config section. [ 57.371] (II) UnloadModule: "modesetting" [ 57.371] (II) Loading sub module "vbe" [ 57.371] (II) LoadModule: "vbe" [ 57.371] (II) Loading /usr/local/lib/xorg/modules/libvbe.so [ 57.404] (II) Module vbe: vendor="X.Org Foundation" [ 57.404] compiled for 1.20.9, module version = 1.1.0 [ 57.404] ABI class: X.Org Video Driver, version 24.1 [ 57.404] (II) Loading sub module "int10" [ 57.404] (II) LoadModule: "int10" [ 57.404] (II) Loading /usr/local/lib/xorg/modules/libint10.so [ 57.427] (II) Module int10: vendor="X.Org Foundation" [ 57.427] compiled for 1.20.9, module version = 1.0.0 [ 57.427] ABI class: X.Org Video Driver, version 24.1 [ 57.427] (II) VESA(0): initializing int10 [ 57.428] (II) VESA(0): Primary V_BIOS segment is: 0xc000 [ 57.441] (II) VESA(0): VESA BIOS detected [ 57.441] (II) VESA(0): VESA VBE Version 3.0 [ 57.441] (II) VESA(0): VESA VBE Total Mem: 16384 kB [ 57.441] (II) VESA(0): VESA VBE OEM: AMD ATOMBIOS [ 57.441] (II) VESA(0): VESA VBE OEM Software Rev: 15.49 [ 57.441] (II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc. [ 57.441] (II) VESA(0): VESA VBE OEM Product: STONEY [ 57.441] (II) VESA(0): VESA VBE OEM Product Rev: 01.00 [ 57.451] (II) VESA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 57.451] (==) VESA(0): Depth 24, (--) framebuffer bpp 32 [ 57.451] (==) VESA(0): RGB weight 888 [ 57.451] (==) VESA(0): Default visual is TrueColor [ 57.451] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) [ 57.451] (II) Loading sub module "ddc" [ 57.451] (II) LoadModule: "ddc" [ 57.451] (II) Module "ddc" already built-in [ 57.451] (II) VESA(0): VESA VBE DDC supported [ 57.451] (II) VESA(0): VESA VBE DDC Level 2 [ 57.451] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec. [ 57.453] (II) VESA(0): VESA VBE DDC read successfully [ 57.467] (II) VESA(0): Manufacturer: BOE Model: 671 Serial#: 0 [ 57.467] (II) VESA(0): Year: 2016 Week: 1 [ 57.467] (II) VESA(0): EDID Version: 1.4 [ 57.467] (II) VESA(0): Digital Display Input [ 57.467] (II) VESA(0): 6 bits per channel [ 57.467] (II) VESA(0): Digital interface is DisplayPort [ 57.467] (II) VESA(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 57.467] (II) VESA(0): Gamma: 2.20 [ 57.467] (II) VESA(0): No DPMS capabilities specified [ 57.467] (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 57.467] (II) VESA(0): First detailed timing is preferred mode [ 57.467] (II) VESA(0): Preferred mode is native pixel format and refresh rate [ 57.467] (II) VESA(0): redX: 0.590 redY: 0.350 greenX: 0.329 greenY: 0.555 [ 57.467] (II) VESA(0): blueX: 0.152 blueY: 0.118 whiteX: 0.312 whiteY: 0.328 [ 57.467] (II) VESA(0): Manufacturer's mask: 0 [ 57.467] (II) VESA(0): Supported detailed timing: [ 57.467] (II) VESA(0): clock: 70.1 MHz Image Size: 344 x 194 mm [ 57.467] (II) VESA(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1485 h_border: 0 [ 57.467] (II) VESA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 787 v_border: 0 [ 57.467] (II) VESA(0): Supported detailed timing: [ 57.467] (II) VESA(0): clock: 60.5 MHz Image Size: 344 x 194 mm [ 57.467] (II) VESA(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1551 h_border: 0 [ 57.467] (II) VESA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 813 v_border: 0 [ 57.467] (II) VESA(0): NCH65�NT15N32 [ 57.467] (II) VESA(0): Unknown vendor-