Hello,
I have a problem with drm-next-kmod and mine GPU, Radeon RX 460
Currently I am running with xf86-video-vesa driver and software rendering
Dmesg output:
I have a problem with drm-next-kmod and mine GPU, Radeon RX 460
Currently I am running with xf86-video-vesa driver and software rendering
Dmesg output:
Code:
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: AMD Phenom(tm) 9650 Quad-Core Processor (2300.06-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f23 Family=0x10 Model=0x2 Stepping=3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
SVM: NP,NAsids=64
TSC: P-state invariant
real memory = 6442450944 (6144 MB)
avail memory = 6174670848 (5888 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <041311 APIC1110>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1150029737 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <041311 RSDT1110> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff irq 2,8 on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2fff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfbd7e000-0xfbd7efff irq 22 at device 2.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbd7fc00-0xfbd7fcff irq 23 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <OHCI (generic) USB controller> mem 0xfbd7d000-0xfbd7dfff irq 20 at device 4.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbd7f800-0xfbd7f8ff irq 21 at device 4.1 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
atapci0: <nVidia nForce MCP77 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac0: <NVIDIA MCP78 HDA Controller> mem 0xfbd78000-0xfbd7bfff irq 22 at device 7.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ath0: <Atheros 9220> mem 0xfbef0000-0xfbefffff irq 19 at device 6.0 on pci1
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: Enabling register serialisation
ath0: AR9220 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ahci0: <NVIDIA MCP77 AHCI SATA controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem 0xfbd76000-0xfbd77fff irq 23 at device 9.0 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x200<NOAA>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
nfe0: <NVIDIA nForce MCP77 Networking Adapter> port 0xc880-0xc887 mem 0xfbd7c000-0xfbd7cfff,0xfbd7f400-0xfbd7f4ff,0xfbd7f000-0xfbd7f00f irq 20 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Using defaults for TSO: 65518/35/2048
nfe0: Ethernet address: 00:24:8c:6b:5d:50
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xcfe00000-0xcfffffff,0xfbf80000-0xfbfbffff irq 16 at device 0.0 on pci2
vgapci0: Boot video device
hdac1: <ATI (0xaae0) HDA Controller> mem 0xfbffc000-0xfbffffff irq 17 at device 0.1 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 19.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 20.0 on pci0
pci4: <ACPI PCI bus> on pcib4
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0
hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0
pcm0: <VIA VT1708S_0 (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and 26,31,30,27 on hdaa0
pcm1: <VIA VT1708S_0 (Rear-panel Digital)> at nid 32 on hdaa0
pcm2: <VIA VT1708S_0 (Rear-panel Digital)> at nid 33 on hdaa0
hdacc1: <NVIDIA MCP78 HDA CODEC> at cad 3 on hdac0
hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc1
pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1
hdacc2: <ATI R6xx HDA CODEC> at cad 0 on hdac1
hdaa2: <ATI R6xx Audio Function Group> at nid 1 on hdacc2
pcm4: <ATI R6xx (HDMI)> at nid 3 on hdaa2
pcm5: <ATI R6xx (HDMI)> at nid 5 on hdaa2
pcm6: <ATI R6xx (HDMI)> at nid 7 on hdaa2
pcm7: <ATI R6xx (HDMI)> at nid 9 on hdaa2
pcm8: <ATI R6xx (HDMI)> at nid 11 on hdaa2
ugen0.1: <nVidia OHCI root HUB> at usbus0
ugen1.1: <nVidia EHCI root HUB> at usbus1
ugen2.1: <nVidia OHCI root HUB> at usbus2
ugen3.1: <nVidia EHCI root HUB> at usbus3
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich2 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD5000BPVT-22HXZT3 01.01A01> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WX41C32R2460
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ada0s1a [rw]...
uhub0: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
KLD drm.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
KLD amdgpu.ko: depends on drmn - not available or version mismatch
linker_load_file: Unsupported file type
ugen2.2: <SEM USB Keyboard> at usbus2
ukbd0 on uhub2
ukbd0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
kbd2 at ukbd0
ugen0.2: <A4TECH USB Device> at usbus0
ukbd1 on uhub0
ukbd1: <A4TECH USB Device, class 0/0, rev 1.10/2.74, addr 2> on usbus0
kbd3 at ukbd1
wlan0: Ethernet address: 94:0c:6d:c5:15:87
wlan0: link state changed to UP
nfe0: link state changed to DOWN
uhid0 on uhub2
uhid0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
ums0 on uhub0
ums0: <A4TECH USB Device, class 0/0, rev 1.10/2.74, addr 2> on usbus0
ums0: 16 buttons and [XYZ] coordinates ID=0