Hello, I installed the 9.0-BETA2 of PC-BSD which uses the GENERIC kernel (still no PC-BSD kernel, I think). Everything was fine until I decided to recompile the kernel and then I can't boot anymore, I get panic on mounting root. I can't enter in Single User mode or any other modes.
This is how I configured the disk in install:
/boot UFS 1024MB
/ /usr /var ZFS about 920GB
swap 4096GB
Right before it stops to mountroot> a few lines above it lists the disks details (it's a 1TB WD Caviar Black):
When I try to boot, it stops and asks for entry into mountroot> and I only get one try at it before it goes to db> and I have to reboot. Pressing ? shows this:
I have tried the following command and they all don't work and result in error: 22:
At the boot menu, I tried to escape to loader prompt, but it cannot find
The following results in same error with mounting root:
I only removed wifi nics, eth nics, compat for 4 5 6 7, and all raid drives from my custom kernel (kept all sata and scsi entries), installed, rebooted and got this. Booting from the PC-BSD live usb list the current drive as ada0s1, but doesn't go in further.
Please advise what I can do to get my system back without reinstalling. Cheers.
EDIT: http://www.daemonforums.org/showthread.php?p=34362 this seems to be similar with zfs on root.
This is how I configured the disk in install:
/boot UFS 1024MB
/ /usr /var ZFS about 920GB
swap 4096GB
Right before it stops to mountroot> a few lines above it lists the disks details (it's a 1TB WD Caviar Black):
Code:
ada0 at ata2 bus 0 scbus1 target 0 lun0
ada0: <name of disk> ATA-8 SATA 3.X ...more info
ada0: 150MB transfers... more info
ada0: 953869 ... more info
ada0: Previouly was known as ad4
When I try to boot, it stops and asks for entry into mountroot> and I only get one try at it before it goes to db> and I have to reboot. Pressing ? shows this:
Code:
List of GEOM managed disk devices:
label/swap0 ufsif/4e79ff63efe9f8f4 label/boot0 ada0s1d ada0s1b ada0s1a ada0s1 ada0
I have tried the following command and they all don't work and result in error: 22:
Code:
ufs:/dev/ada0s1a
zfs:/dev/ada0
zfs:/dev/ada0s1
zfs:/dev/ada0s1a
zfs:/dev/ada0s1b
zfs:/dev/ada0s1d
zfs:/dev/ad4s1
zfs:/dev/ad4s1b
zfs:tank
zfs:zroot
At the boot menu, I tried to escape to loader prompt, but it cannot find
Code:
boot GENERIC
boot /boot/kernels/GENERIC
The following results in same error with mounting root:
Code:
OK boot kernel.old
OK unload
OK boot /boot/kernel.old/kernel
I only removed wifi nics, eth nics, compat for 4 5 6 7, and all raid drives from my custom kernel (kept all sata and scsi entries), installed, rebooted and got this. Booting from the PC-BSD live usb list the current drive as ada0s1, but doesn't go in further.
Please advise what I can do to get my system back without reinstalling. Cheers.
EDIT: http://www.daemonforums.org/showthread.php?p=34362 this seems to be similar with zfs on root.