Booting problem with FreeBSD 7

I tried booting with FreeBSD 5.3, and 6.4 and works fine, i even installed and configured the basics on 6.4 but when i tried booting FreeBSD 7 (stable) it gets stuck at

md0: Preloaded image </boot/mfsroot> 4423680 at 0x____some hex

i tried going into boot with no acpi, safemode and prompt but to no avail.

the computer in question is a 4 year old laptop (sager model 888E) 1gb ram, 3ghz (P4), 80gb Hard drive, and ati9000. in bios (extremelly minimal i have disabled the ide 32bit i/o but did not make any diff

i also get an hptrr: no controller detected (but that is for raid from what i have gathered.

does anyone know what i can do to install Freebsd7 on this laptop? thank you.
 
zeta_immersion said:
I tried booting with FreeBSD 5.3, and 6.4 and works fine, i even installed and configured the basics on 6.4 ....

Just a suggestion, i have never tested it:
You could do sysinstall from within 6.4 :) and select from options another release name, then install traditional way, but with media set to ftp.

edit: on second tought ... probably it will not work for freebsd-7-stable.
 
i will try that see if it works (no harm done anyway) ... but it still odd that 5.x and 6.X works fine and yet 7 does not ... i thought of doing a ram-test but not sure ... also, i have read (or mis-read) that one could install FreeBSD on a hard drive on one computer and then take it out and put it in another and boot just fine? ... is this true? would i have to modify the kernel (probably yes right?)
 
edhunter said:
Just a suggestion, i have never tested it:
You could do sysinstall from within 6.4 :) and select from options another release name, then install traditional way, but with media set to ftp.

edit: on second tought ... probably it will not work for freebsd-7-stable.
I've done it. I had FreeBSD 6.1 DVD (shipped with book). At time i bought book, it was 6.2 out, so i fallowed book, and changed that variable.
Everything worked like charm

only thing i'm not sure about sable, but if there are distributions and packages for stable, it should work
 
Back
Top