# ifconfig -a
ale0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=319b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MCAST,WOL_MAGIC>
ether 00:24:32:28:cc:4e
inet 192.168.2.23 netmask 0xffffff00 broadcast 192.168.2.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
ccc said:rt2860 module is still missing at the GENERIC kernel from 7.2.
Perhaps I'll try to create a driver module from windows using ndisgen:.
firmware and windows driver can be downloadet at:
http://www.ralinktech.com.tw/data/drivers/RT2860_Firmware_V11.zip
greetings
ccc
mathuin said:I tried this earlier in the thread and had no success -- hopefully you will succeed where I failed. It's not in 8.0-BETA2 either. :-(
>pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x83401043 chip=0x27ac8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GME Express Processor to DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x83401043 chip=0x27ae8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945 Express Chipset Family'
class = display
subclass = VGA
vgapci1@pci0:0:2:1: class=0x038000 card=0x83401043 chip=0x27a68086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GM/GU Express Integrated Graphics Controller'
class = display
hdac0@pci0:0:27:0: class=0x040300 card=0x831a1043 chip=0x27d88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) High Definition Audio'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x830f1043 chip=0x27d08086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:1: class=0x060400 card=0x830f1043 chip=0x27d28086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:3: class=0x060400 card=0x830f1043 chip=0x27d68086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x830f1043 chip=0x27c88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x830f1043 chip=0x27c98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x830f1043 chip=0x27ca8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x830f1043 chip=0x27cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x830f1043 chip=0x27cc8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib4@pci0:0:30:0: class=0x060401 card=0x830f1043 chip=0x24488086 rev=0xe2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x830f1043 chip=0x27b98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM (ICH7-M) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:2: class=0x010180 card=0x830f1043 chip=0x27c48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller'
class = mass storage
subclass = ATA
ale0@pci0:3:0:0: class=0x020000 card=0x83241043 chip=0x10261969 rev=0xb0 hdr=0x00
vendor = 'Attansic (Now owned by Atheros)'
device = 'PCI-E ETHERNET CONTROLLER (AR8121/AR8113 )'
class = network
subclass = ethernet
ndis0@pci0:1:0:0: class=0x028000 card=0x27901814 chip=0x07811814 rev=0x00 hdr=0x00
vendor = 'Ralink Technology, Corp'
device = 'Wireless (RT2860/RT2890)'
class = network
> ifconfig
ale0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=319b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MCAST,WOL_MAGIC>
ether 00:24:8c:4e:89:cd
media: Ethernet autoselect (none)
status: no carrier
ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:22:43:6c:fd:dc
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:22:43:6c:fd:dc
inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet OFDM/24Mbps mode 11g
status: associated
ssid Home2 channel 11 (2462 Mhz 11g) bssid 00:05:59:0c:47:60
country US authmode WPA privacy OFF txpower 0 bmiss 7 mcastrate 9
mgmtrate 9 scanvalid 60 protmode CTS roaming MANUAL bintval 0
defaultrouter="192.168.0.1"
hostname="minibot.cybertron.local"
wlans_ndis0="wlan0"
ifconfig_wlan0="WPA inet 192.167.0.17 netmask 255.255.255.0"
thuglife said:Hello
I have 1000H and ndis works pretty well.
> uname -a
FreeBSD minibot.cybertron.local 8.0-CURRENT-200906 FreeBSD 8.0-CURRENT-200906 #2: Mon Jun 29 04:57:24 EEST 2009 root@minibot.cybertron.local:/usr/obj/usr/src/sys/MINIBOT i386
#ndisgen rt2860.inf rt2860.sys
sudo /etc/rc.d/dhclient start wlan0