fixed wireless modem

Is there any way, via issuing Hayes (AT) commands via a terminal emulator, to find out if a USB modem is locked to a particular mobile phone network?

I installed FreeBSD, but it does not have a default GUI ! I have to install it myself ! I watched a lot of videos about installing the GUI in FreeBSD, and there all the video authors install it by connecting to the Internet via wifi-router, but to connect to the Internet I have only a 3g modem...

How do I install FreeBSD with modem megafon ??? Mobile Broadband.

Good day! Available equipment: Samsung GT-E1282T. GPRS available on this device. usbconfig output: ugen1.3: <product 0x3d00 vendor 0x1782> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) What are the chances of launch of this device as GSM modem? kldload umodem.ko ucom.kou3g.ko...

Good day! A Raspberry Pi B running FreeBSD 10.3 PRERELEASE as of 27 January 2016. All this added LTE usb modem Huawei E3372h (829F). The system does not see it as a modem, and sees in first time as: ugen0.4: <MOBILE> at usbus0 umass0: <Mass Storage> on usbus0 umass0: SCSI over Bulk-Only...

Hi. I used net/mpd5 with usb 3g modem. It`s work fine, but when I run mpd restart, in mpd.log write: root@freebsd:/usr/local/etc/mpd5 # tail -f /var/log/mpd.log Dec 11 19:37:01 freebsd mpd: Multi-link PPP daemon for FreeBSD Dec 11 19:37:01 freebsd mpd: Dec 11 19:37:01 freebsd mpd: process 28463...

I am a pfSense fan and have Sierra MC7700 and Atheros Mifi embedded builds in a couple of headless vehicle Intel PC's. So I am familiar with embedded gear and I am learning with FreeBSD on the Beaglebone Black. So due to a single USB port I used a USB hub with MC7700 on a USB to MiniPCIe adapter...

I'm new to FreebsdFreeBSD, yesterday I installed freebsdFreeBSD 10.1 for the first time on my pc (iI spent 10 years on Windows and now iI want to try FreeBSD), then I wanted to connect to internet using my 3g USB, I tried hard to modify ppp.conf to get my 3g USB working but nothing works for me...

Hello you, I have a problem with the configuration of the server Freebsd FreeBSD 10.1 with 4G modem. This modem accepts 4G Internet and attaches wireless internet to the server. Configured ifconfig wlan0, status: associated; ssid: 4G_MaxTelecom When I type in shell: ping 192.168.8.1, the modem...

Good day! Can someone help me with my problem? I have a system: uname -a FreeBSD home 10.0-STABLE FreeBSD 10.0-STABLE #0: Tue Aug 19 22:41:25 MSK 2014 kot@home:/usr/obj/usr/src/sys/BSDSERV amd64 And for internet I use 3G USB stick: lsusb -v Bus /dev/usb Device /dev/ugen3.2: ID 12d1:1506...

Trying to attach an Android phone, as a modem. usbconfig: ugen7.2: <Joy MediaTek> at usbus7, cfg = 0 md = HOST spd = HIGH (480Mbps) pwr = ON (500mA) USB \ VID_0BB4 & PID_0003 ndisgen requires the sys driver. Edited tetherxp.inf, in Windows - raboatet (What? -- mod ) give usb8023x.sys, -...

Hi, Happy to use my Mac daily and I recently bought some APU1C board from PC Engines running pfSense 2.12 (FreeBSD 8.3 based) and testing 2.2 Alpha (FreeBSD 10 based) and I am trying to setup a failover of my DSL access trough a 3G or 4G connection. But I am fighting to find a supported...

I have been running FreeBSD 9.0 on my laptop for a couple of years. This included using mobile broadband via a Huawei E169 USB modem. This worked with no additional drivers. I have now upgraded to the newly released 10.0 and the device no longer works. When I plug it in, it is seen as a mass...

Hello, I'm having a problem with user-land ppp using a 3G USB Modem ZTE (MF190S). The modem is successfully recognized as a u3g device. I could also talk to the device manually and chat to it using AT commands, as far as I could go where it replies with CONNECT 7200000, but no further as it...

Hi there everyone. I'm interested to know how I can install a 3G modem in freeBSD FreeBSD and how to use it?

I recently started using freebsd FreeBSD and I have a workstation with 9.0-RELEASE FreeBSD 9.0-RELEASE #0. I also have an LTE USB modem. #usbconfig ugen4.2: <Modem Yota GCT SEMICONDUCTOR Inc> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON When I connect the modem /var/log/messages says...

When I attached mu ZTE ac8700 modem, tail /var/log/messages gives --> ugen0.3: <ZTE, Incorporated> at usbus0 so it's obvious that this is recognised by the kernel. My ppp.conf file I have edited like default: set log Phase Chat LCP IPCP CCP tun command ident user-ppp VERSION (built...

Hello team. I have a Rogers Rocket Stick, ZTE MF668, USB modem. I've researched here and Google, the IRC channels, and such. uname -a 9.0-RC2 FreeBSD 9.0-RC2 #0: Sat Nov 12 18:09:11 UTC 2011 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 camcontrol devlist <ZTE MMC...

Hi, I've got a USB modem/phone 3G that I connect to my server under FreeBSD 8.2-RELEASE. I want to use to send SMS throught smstools (or another software). I try it on an UBUNTU machine and all works perfectly, so the hardware is correct. I can send SMS in this configuration. On FreeBSD, only...

I've been trying to find a good guide (Google, Forum search) on how to set up my 3G modem using only the base system. Previously I've been succesful using modemmanager. I understand it involves u3g/ppp, but that's about it. The manpage for u3g mentions the u3gstub manpage in order to switch from...