Thank you T-Daemon. I have also found the folder to import my private CA certificate for the proxy. I just
cp the file into
/usr/share/certs.
To transfer the CA.crt file I had to un-mount my Micro HDD via off-line it inside of Windows 10. This cannot be a flash drive for this to work.
View attachment 15461
(Image: Offline Drive for use with Hyper-V FreeBSD Host)
Unmount the USB HDD inside of Computer Management find your USB HDD and change it to offline with a right click.
View attachment 15462
(Image: Turn off Checkpoints temp for use of new drive)
Turn checkpoints off or it will fail to boot the box, just disable it temporarily so you can attach a new ATA drive.
View attachment 15463
(Image: add a new HDD and select the offline drive)
add your new HDD under IDE controller and select the physical disk.
View attachment 15464
(Image: Inside of FreeBSD)
Boot your Hyper-V VM FreeBSD Box
Now when your inside of FreeBSD run command:
gpart list | more
Make sure to | "pipe" more for this and find your new ATA drive. Notice my 3.8G USB Microdrive da1s1, Once again this must be a USB "HDD" not a flash drive.
I have found the name da1s1, so let's mount my msdos partition.
Just use the command:
mount -v -t msdosfs /dev/da1s1 /mnt/
View attachment 15465
(Image: Mirco Drive mounted that has my CA file)
after run a
df and see if your new ATA drive is mounted.
once you can see the /mnt/ you can cd to that mount and do a ls and find your file you want to copy over to the FreeBSD box.
Now cp the file my file is CA-cert.crt
cp /mnt/CA-cert.crt /usr/share/certs
Now the issue with private proxy certificate authority is now resolved!!
Thanks for the information about the configuration file.