# ifconfig
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether **:**:**:**:**:**
media: Ethernet autoselect (10baseT/UTP <half-duplex>)
status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether **:**:**:**:**:**
ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
lladdr 0.79.70.5b.0.0.24.1d.a.2.ff.fe.0.0.0.0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
rt28700: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether **:**:**:**:**:**
media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng
status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether **:**:**:**:**:**
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: IEEE 802.11 Wireless Ethernet<unknown subtype>
status: associated
ssid NETGEAR channel 1 (2412 Mhz 11g ht/20) bssid **:**:**:**:**:**
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
protmode CTS -ampdutx ampdurx ampdulimit 64k ampdudensity 8 shortgi
wme burst
# dhclient wlan0
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 19
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
# dmesg | grep rt2870
rt28700: <Cisco-Linksys LLC Dual-Band Wireless-N USB Networ, class 0/0, rev 2.00/1.01, addr 2> on usbus5
rt28700: MAC/BBP RT2870 (rev 0x28720202), RF RT2850
rt28700: skip channel 10, could not find extension channel
rt28700: skip channel 11, could not find extension channel
rt28700: skip channel 12, could not find extension channel
rt28700: skip channel 13, could not find extension channel
rt28700: skip channel 14, could not find extension channel
rt28700: skip channel 64, could not find extension channel
rt28700: skip channel 140, could not find extension channel
rt28700: skip channel 165, could not find extension channel
rt28700: <Cisco-Linksys LLC Dual-Band Wireless-N USB Networ, class 0/0, rev 2.00/1.01, addr 2> on usbus5
rt28700: attaching
rt28700: MAC/BBP RT2870 (rev 0x28720202), RF RT2850
rt28700: skip channel 10, could not find extension channel
rt28700: skip channel 11, could not find extension channel
rt28700: skip channel 12, could not find extension channel
rt28700: skip channel 13, could not find extension channel
rt28700: skip channel 14, could not find extension channel
rt28700: skip channel 64, could not find extension channel
rt28700: skip channel 140, could not find extension channel
rt28700: skip channel 165, could not find extension channel
rt28700: initializing
rt28700: loading 8051 microcode
rt28700: 8051 microcode was successfully loaded
#