Latest activity

  • S
    Dumb question but is it a network scanner? Don't know if this will help at all (for mine is a Brother multi function, but I have a page https://srobb.net/cliscanprint.html#FreeBSD on it. If it is a network scanner, maybe you need sane-airscan...
  • aragats
    Also, I remember that several years ago we discussed here a possibility to use UDF on flash drives. As a proof of concept I tried that, but don't remember the details and performance.
  • S
    scottro replied to the thread how to update ports?.
    I should add to what I said above. when you use gitup, it's not necessary to clear the ports directory, it will pull in changed ports on ly. Also, when done, you should cd to /usr/ports and run make fetchindex.
  • B
    balanga reacted to SirDice's post in the thread Solved Page does not load. with Like Like.
    It happens. Just last week I was upgrading a server (we haven't used it in a while) and also upgrading the MySQL version. Didn't want to start (some configuration options needed adjusting). Looked at the timestamps of the error messages in the...
  • H
    Perhaps to put a tar *file* in the most primitive fat fs?
  • aragats
    HP-UX used to write floppies directly with tar. I'm not sure how it was implemented though, I mean, whether there was a possibility to append.
  • vermaden
    First - I install all FreeBSD systems as Auto (ZFS) with BIOS+GELI option - I want to have a 'backup' booting option if the default does not works for any reasons - that means that checking machdep.bootmethod is pointless here - both need to be...
  • ShelLuser
    ShelLuser replied to the thread how to update ports?.
    So, late reaction but then again that never stopped me before. Yah, FreeBSD has started using Git to control the "big three": the source tree (/usr/src), the ports collection (/usr/ports and last but certainly not least: the documentation...
  • H
    Sure you can do that. But can you use /usr/bin/mt with it?
  • SirDice
    SirDice replied to the thread Solved Page does not load..
    Should be fine, even though the server wasn't used it was powered on and running. It's an old server though, so clock drift might be huge. Crystals also degrade over time. NTP is keeping it in sync now, will have to see if it can keep up. It's...
  • K
    kjpetrie replied to the thread Solved Page does not load..
    CMOS battery?
  • SirDice
    SirDice replied to the thread how to update ports?.
    It's not available in quarterly yet. It is in latest. It's a brand new port, it'll get to quarterly when 2027Q1 is branched off.
  • SirDice
    Yes, Network is unreachable. You seem to have a routing/connectivity issue.
  • S
    scottro replied to the thread how to update ports?.
    To simplify it for myself, I use gitup. It can be installed from packages. Then edit /usr/local/etc/gitup.conf. Usually you just have edit the release stanza which may still default to 13.something. After that, you can get ports by just running...
  • nb
    I don't know why. After updating, I always check for library conflicts ("pkg check -d" and "pkg_libchk").
  • nb
    nb reacted to Maxnix's post in the thread Trying to run KDE 6 Plasma with Wayland.... with Thanks Thanks.
    Why do you have the libraries for the LTS branch (x11/plasma6lts-libplasma)? If you want the latest version you must remove everything related to Plasma 6.6.X.
  • K
    I've just installed FreeBSD 15.1-RELEASE but freebsd-update fetch fails with: # freebsd-update -v debug fetch src component not installed, skipped Looking up update.FreeBSD.org mirrors... 3 mirrors found. Fetching public key from...
  • SirDice
    SirDice replied to the thread Solved Page does not load..
    It happens. Just last week I was upgrading a server (we haven't used it in a while) and also upgrading the MySQL version. Didn't want to start (some configuration options needed adjusting). Looked at the timestamps of the error messages in the...
  • SirDice
    Why would it install a dependency if nothing depends on it? Did you install a complete x11/xorg (it's included with x11-fonts/xorg-fonts)? Or x11/xorg-minimal? Or only the GUI application you wanted to use on the server?
  • SirDice
    SirDice replied to the thread how to update ports?.
    All (supported) versions of FreeBSD use the exact same ports tree. There's only one.
  • robroy
    robroy reacted to Phishfry's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    It goes way back further than 14.x When conceived it sounded killer. Somehow in 8 years it is still beta. https://forums.freebsd.org/threads/running-a-ssh-server-running-on-a-schedule.66906/#post-396391
  • robroy
    robroy reacted to Yampress's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    pkgbase — it was supposed to be beautiful, easy, and wonderful, but it’s a disaster. I thought the goal of introducing this mechanism was to improve the update process—not just within a single release, but also for upgrades to other FreeBSD...
  • robroy
    robroy reacted to loveydovey's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    Which is why I do not adopt pkgbase yet.
  • robroy
    robroy reacted to vermaden's post in the thread New FreeBSD pkgbase-update(8) Tool with Thanks Thanks.
    Original article here. Consider this when replying. FreeBSD, The FreeBSD Foundation, and The FreeBSD Forums are not associated with the content of this article.
  • B
    Hi all, We have ported bhyve to macOS on Apple Silicon and would like to show it here, mostly because the work produced a set of patches against usr.sbin/bhyve that we want to send back, and we would like advice on how to do that well. The...
  • vermaden
    For a start - thank You all for all welcome comments. The same as all of You I also do not like how PKGBASE is being organized and handled. The concept is good but the 'planning' around it? Terrible. It was kinda HUGE shock for me that it was...
  • vermaden
    vermaden reacted to fjdlr's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    Hi Thank you very much—another very useful project. I also don’t understand why a scripted tool isn’t included in the RELEASE or referential . After all, `pkgbase` hasn’t exactly just appeared in the last few months! Thanks Vermaden !
  • vermaden
    vermaden reacted to DerTeufel's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    IIRC in 14.x. The 15.0 installer gives a choice, but still calls it preview.
  • vermaden
    vermaden reacted to Yampress's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    When was `pkgbase` introduced? An update tool should have been prepared and rolled out at the same time. What’s happening now is a complete joke. First, we create something that doesn’t fully work and isn’t well thought out, and then we scramble...
  • vermaden
    vermaden reacted to sko's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    ...and still no equivalent to freebsd-updates' "fetch", "updatesready" and most importantly "rollback" commands for pkgbase. So I guess it's safe to assume it won't get these features before it is forced upon everyone. So we end up with something...
  • vermaden
    vermaden reacted to epower53's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    vermaden well done... the lack of a tool like this is why I'm still using freebsd-update on 15.1. A suggestion to help further reduce the gap between freebsd-update and pkg - add automatic boot environment snapshots to every update and upgrade...
  • vermaden
    vermaden reacted to Emrion's post in the thread New FreeBSD pkgbase-update(8) Tool with Thanks Thanks.
    You're too quick to dismiss this concept. It's just that the (official) tool isn't written for the moment. That will come for sure. Maybe it will be integrated in freebsd-update itself. In the meantime, you have the pkgbase upgrade instructions...
  • vermaden
    vermaden reacted to Yampress's post in the thread New FreeBSD pkgbase-update(8) Tool with Thanks Thanks.
    pkgbase — it was supposed to be beautiful, easy, and wonderful, but it’s a disaster. I thought the goal of introducing this mechanism was to improve the update process—not just within a single release, but also for upgrades to other FreeBSD...
  • vermaden
    vermaden reacted to DerTeufel's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    Is it planned to be included in the base system?
  • vermaden
    vermaden reacted to Emrion's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    I wrote a tool like that five months ago, but it can't upgrade to ALPHA or BETA target. https://github.com/Emrion/pkgb-update/ It doesn't update the loaders either, as it's the job of sysutils/loaders-update.
  • vermaden
    vermaden reacted to loveydovey's post in the thread New FreeBSD pkgbase-update(8) Tool with Like Like.
    Which is why I do not adopt pkgbase yet.
  • H
    Does HP have relevant configuration files? I don't generally print directly from my computer, but I know that some manufacturers like Canon provide configurations in their Linux packages that can be used. I don't see any reason why CUPS and sane...
  • bjs
    bjs reacted to blackbird9's post in the thread Music… with Like Like.
    Somehow, this seemed appropriate... View: https://www.youtube.com/watch?v=_YC3sTbAPcU And, I guess... View: https://www.youtube.com/watch?v=VbD_kBJc_gI and View: https://www.youtube.com/watch?v=3xZmlUV8muY
  • MG
    Is there a shortest-way howto to start any basic Wayland screen on a common X.org system? It would be nice to just support a different graphical screen ...
  • Espionage724
    Espionage724 reacted to lostpacket's post in the thread AlpineBSD: why not Free[BSD]? with Thanks Thanks.
    GLib bug fix for file copy progress: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/5397 Kernel inotify bug report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=299239 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=299241
  • lostpacket
    lostpacket replied to the thread AlpineBSD: why not Free[BSD]?.
    GLib bug fix for file copy progress: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/5397 Kernel inotify bug report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=299239 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=299241
  • Espionage724
    I'm curious to read a bug report; I never noticed file copying be any issue on FreeBSD but maybe there's certain methods to run into it Iirc I saw that 14.2, and kmods-latest was introduced 14.3; I'd be using STABLE or CURRENT and having...
  • pez
    pez reacted to Mark721's post in the thread PF trying to get started with fail2ban and pf with Thanks Thanks.
    Glad I can help. It takes a bit to master, but once fail2ban is working and tuned, it is very effective. My current fail2ban block list is consistantly over 200 ip's.
  • lostpacket
    lostpacket replied to the thread AlpineBSD: why not Free[BSD]?.
    This is a real issue and pain in the butt. Exactly what I posted about on LinkedIn, and was tols to do something about it rather than complain.
  • lostpacket
    lostpacket replied to the thread AlpineBSD: why not Free[BSD]?.
    Absolutely. Compiling ports from source is not hard, nor is configuring FreeBSD or creating an ISO. What has been, is finding and reporting or fixing bugs, such GLib (now merged) preventing file copy progress on FreeBSD. Multiple inotify kernel...
  • nb
    ~ pkg upgrade Checking for upgrades (13 candidates): gdisk-1.0.10_1 is locked and may not be modified Checking for upgrades (13 candidates)............ done Processing candidates (13 candidates): ........ done Checking integrity... done (2...
  • Zare
    Zare reacted to Emrion's post in the thread New FreeBSD pkgbase-update(8) Tool with Thanks Thanks.
    You're too quick to dismiss this concept. It's just that the (official) tool isn't written for the moment. That will come for sure. Maybe it will be integrated in freebsd-update itself. In the meantime, you have the pkgbase upgrade instructions...
  • lostpacket
    lostpacket reacted to rbranco's post in the thread AlpineBSD: why not Free[BSD]? with Thanks Thanks.
    Thank you for showing everyone how to leverage AI to quickly manifest a vision into reality, and that this is just a fraction of what is possible. I see lots of commits co-authored by Claude in the FreeBSD src repo, so pragmatism won.
  • patpro
    Ho Netdata is pretty cool! But I have to agree on this con: «The sheer number of metrics collected by default can be overwhelming if you only care about a handful of indicators» :D I’ll keep it around, but stopped, until I need it.
Back
Top