Latest activity

  • nb
    I'm just starting Wayland from the terminal. I'm not using sddm.
  • MG
    F2/F12 is Acer BIOS standard. If the following 512 bytes of bootloader is no valid executable, I think that can result in a freezing system or a reset-loop. It happens if you replace /boot with something else because the original /boot/boot0 is a...
  • K
    But by the time it does that, it's beyond the F2/F12 stage and already chosen the boot device, so that can't be it. It's a mystery and will have to remain so because I'm not going back to investigate further so unless anyone has an identical...
  • MG
    Something with root permissions that overwrites /boot/boot0 or links a different file to it that's not the start of the device?
  • K
    The BIOS describes itself on its boot splash as "EFI BIOS" and the two things I did to fix the problem were change the partitioning scheme from msdos to GPT and create an efi partition manually because the installer didn't. Given the age of the...
  • MG
    I thought the bootloader or partition table was wasted by some install procedure...
  • K
    Nothing. It's all working now (apart from the display which is why I stopped using it as a laptop). This is not a help thread. It's the Off-Topic area. If I'd wanted help I'd have posted in Installing and Upgrading FreeBSD or Systems Hardware.
  • B
    balanga replied to the thread Solved Page does not load..
    After resetting the time on my server and rebooting as well as using a different phone for USB tethering, I am back to normal although not exactly sure what the specific cause was. It may have been a combination of one or more factors. In any...
  • F
    FreeBSD News posted the thread July-September 2026 Status Report in Blogs and Newsfeeds.
    Original article here. Consider this when replying. The July to September Status Report is now available with 51 entries. Continue reading...
  • MG
    What doesn't work but should?
  • nb
    I'm having a similar issue with version 15.1. Repeating the "pkg upgrade" allowed me to run Plasma under x11 in a stripped-down version. The keyboard ignores previous settings, decorations and styles don't work. Wayland doesn't work at all. Same...
  • lostpacket
    Thank you for posting... and just to follow up on this there was a post about HyprBSD on REDDIT as well: (Link: REDDIT /r/FreeBSD): HyprBSD is a new FreeBSD 15.1-based desktop distro with a polished Hyprland Wayland experience, graphical...
  • lostpacket
    HyprBSD Provides Wayland-Based Desktop Built Atop FreeBSD, Complete With Steam Gaming (Phoronix)
  • K
    CPU: Core2 Duo U9400 1.4GHz BIOS: InsydeH2O v1.35
  • Espionage724
    I haven't updated an OS in years (but can respect others doing it longer-term and OSs supporting it), but I'm kind-of curious why wiping and redeploying isn't a quicker consideration before gambling. Clean OS install ensures the updated OS...
  • lostpacket
    lostpacket replied to the thread AlpineBSD: why not Free[BSD]?.
    HyprBSD uses mainly FreeBSD packages, you can check this from: /usr/local/etc/pkg/repos/*.conf files. Also running hyprbsd verify after installing from ISO will show you what has changed. The only files I actually host are what's needed, drivers...
  • SirDice
    Same place where all other discrepancies, bugs, and other issues should be reported. https://bugs.freebsd.org/bugzilla/
  • Yampress
    When was `pkgbase` introduced? An update tool should have been prepared and rolled out at the same time. What’s happening now is a complete joke. First, we create something that doesn’t fully work and isn’t well thought out, and then we scramble...
  • SirDice
    SirDice replied to the thread Managing time.
    As long as you don't do any automated stock trading you really don't need microsecond accuracy. For most situations getting the time from a couple of internet time servers is "good enough".
  • aragats
    aragats reacted to vermaden's post in the thread New FreeBSD pkgbase-update(8) Tool with Thanks Thanks.
    Original article here. Consider this when replying. FreeBSD, The FreeBSD Foundation, and The FreeBSD Forums are not associated with the content of this article.
  • SirDice
    SirDice replied to the thread Solved Does it work?.
    That flushed your state table.
  • Yampress
    pkgbase — it was supposed to be beautiful, easy, and wonderful, but it’s a disaster. I thought the goal of introducing this mechanism was to improve the update process—not just within a single release, but also for upgrades to other FreeBSD...
  • Crivens
    Good to know. Maybe some other archivers can do the same, as f.e. lha, zpaq, ...? And it keeps the low level spies away, simply plugging in the stick and finding only "format this drive before you can use it" will not give them the data.
  • cracauer@
    Throwing OpenBSD into the requirements makes it tough.
  • SirDice
    SirDice replied to the thread how to update ports?.
    You can only do a git pull if it's actually a git repository. I'm assuming your current /usr/ports was previously populated by portsnap, this is NOT a git repository. So, delete everything in /usr/ports/ and do a git clone of the ports tree. (It...
  • Crivens
    I do that, too, if everything fails. It's not really a file system but when you have tar and a direct access to the device? Pretty good. Can you do such things with windows also? tar tf /cygdrive/d?
  • SirDice
    SirDice replied to the thread Solved Does it work?.
    It will only block new connections, connections that already have a state will continue to pass.
  • H
    Unfortunately not accessible with OpenBSD. I use an USB stick with ff2 of OpenBSD on both, Fee- and OpenBSD, but one must be careful with the label. unfortunately FAT & is not usable with rsync, what I use to transport files. I would also like...
  • MG
    Problem is that all ARM smartphones are boarded up against application as clean computer. You can only boot it from a vague internal storage volume. You can't run a different kernel or ARM executables. You're locked in an app-playground without...
  • T
    tingo replied to the thread Audiobookshelf.
    there are a lot of bugs in the ports queue. Often it helps sending a gentle reminder to the freebsd-ports mailing list, asking for someone to review and commit.
  • B
    balanga reacted to MG's post in the thread Managing time with Thanks Thanks.
    I have a personal standard of: ntpdate -t 5 0.freebsd.pool.ntp.org & to set the clock but I forgot what this really is. The url returns official time, based on ip geo-location? I like it for the case of a computer with a bad cmos battery. :p
  • T
    takeda replied to the thread Audiobookshelf.
    There's a patch waiting to be added to ports tree, but looks like it's not receiving much attention. I wish someone could merge it: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=299294
  • vermaden
    Original article here. Consider this when replying. FreeBSD, The FreeBSD Foundation, and The FreeBSD Forums are not associated with the content of this article.
  • B
    balanga replied to the thread Managing time.
    Can you suggest a GPS time source? Obviously one which works with FreeBSD...
  • J
    jdakhayman reacted to vermaden's post in the thread Valuable News – 2026/11/09 with Thanks Thanks.
    Original article here. Consider this when replying. FreeBSD, The FreeBSD Foundation, and The FreeBSD Forums are not associated with the content of this article.
  • B
    balanga reacted to kent_dorfman766's post in the thread Managing time with Thanks Thanks.
    If it's a major requirement to have correct NTP time at startup you should invest in a GPS time source, otherwise you are relying upon the hardware clock of your local server as a startup seed, then generally slowly skewing the local clock to...
  • T
    tingo reacted to Espionage724's post in the thread ARM Board Recommendations. with Like Like.
    Was working well for a while but started noticing random undervoltage messages; I'm thinking it was either the PSU (random 150W P4-era/weak rails) or thin wires (pretty sure CD audio wires not voltage-rated :p) All's good now with a CORSAIR 430W...
  • Zare
    I keep https://github.com/shkhln/freebsd-ports/tree/chromium-sandbox for all 0 people that are interested in it.
  • T
    tingo reacted to blackbird9's post in the thread Music… with Like Like.
    Siousie... View: https://www.youtube.com/watch?v=5SvM4jhGqg4 View: https://www.youtube.com/watch?v=CDx59ymM5Ko View: https://www.youtube.com/watch?v=I9MyIviV6hc View: https://www.youtube.com/watch?v=tiVfRoywQtk
  • T
    tingo reacted to bakul's post in the thread Music… with Like Like.
    Blondie live - Musikladen 1977 View: https://www.youtube.com/watch?v=3aWsq0ykFfE
  • T
    tingo reacted to vermaden's post in the thread Valuable News – 2026/11/09 with Like Like.
    Original article here. Consider this when replying. FreeBSD, The FreeBSD Foundation, and The FreeBSD Forums are not associated with the content of this article.
  • Espionage724
    Espionage724 replied to the thread Managing time.
    Did this on a Pi webserver no RTC for months :D (rc.conf): ntpd_enable="YES" ntpd_sync_on_start="YES" Just re-read about no internet though; not sure about FreeBSD, but fake-hwclock covers that Linux...
  • monwarez
    you could try by running with a different WINEPREFIX, assuming that the games does not want to absolutely link to steam. Also for the number of spawn thread, I think the easier solution is to use FreeBSD racct with rctl and to limit the number of...
  • MG
    MG replied to the thread Managing time.
    I have a personal standard of: ntpdate -t 5 0.freebsd.pool.ntp.org & to set the clock but I forgot what this really is. The url returns official time, based on ip geo-location? I like it for the case of a computer with a bad cmos battery. :p
  • K
    I have an old Acer 5810T laptop with a non-functioning display which I decided to repurpose as a spare FreeBSD server, so I replaced the CMOS battery, plugged in a VGA monitor, and set the BIOS settings to what I thought would be appropriate for...
  • B
    balanga reacted to MG's post in the thread Managing time with Thanks Thanks.
    When ping -4 -c1 www.google.com starts exiting with 0?
  • cracauer@
    cracauer@ reacted to MG's post in the thread Managing time with Thanks Thanks.
    When ping -4 -c1 www.google.com starts exiting with 0?
  • MG
    MG replied to the thread Managing time.
    When ping -4 -c1 www.google.com starts exiting with 0?
  • B
    How do people manage time on their systems on networks? One problem I have is that I can't guarantee that my file server is connected to the Internet at boot time. Is there any way to set the time when Internet access is attained, which in my...
  • robroy
    robroy reacted to vermaden's post in the thread Valuable News – 2026/11/09 with Thanks Thanks.
    Original article here. Consider this when replying. FreeBSD, The FreeBSD Foundation, and The FreeBSD Forums are not associated with the content of this article.
Back
Top