I got uefi installed now, it for whatever reason started booting in 1920×1080 all I did was update my linux then update-grub and even that grub screen changed, then I set BIOS to efi without csm and it freebsd booted and then I noticed that it was 1920×1080 instead of 1024x768 . before that it wasn't working and slim too.
s**t let me go back into fbsd and see if I can fanagle a copy of Xorg log on to this linux partiton, it was someting about a card not havig it la la but i bet this is due to it not knowing what to do with the terminal already set at 1920×1080
s**t let me go back into fbsd and see if I can fanagle a copy of Xorg log on to this linux partiton, it was someting about a card not havig it la la but i bet this is due to it not knowing what to do with the terminal already set at 1920×1080
Code:
[ 8.598]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 8.598] X Protocol Version 11, Revision 0
[ 8.598] Build Operating System: FreeBSD 12.0-RELEASE-p11 amd64
[ 8.598] Current Operating System: FreeBSD FreeBSD64.net 12.0-RELEASE-p10 FreeBSD 12.0-RELEASE-p10 GENERIC amd64
[ 8.599] Build Date: 24 October 2019 09:13:24AM
[ 8.599]
[ 8.599] Current version of pixman: 0.38.4
[ 8.599] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.599] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.599] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 30 22:06:48 2019
[ 8.602] (II) Loader magic: 0x421020
[ 8.602] (II) Module ABI versions:
[ 8.602] X.Org ANSI C Emulation: 0.4
[ 8.602] X.Org Video Driver: 20.0
[ 8.602] X.Org XInput driver : 22.1
[ 8.602] X.Org Server Extension : 9.0
[ 8.603] (--) PCI:*(0:0:2:0) 8086:1616:103c:2216 rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/65536
[ 8.603] (==) Using default built-in configuration (39 lines)
[ 8.603] (==) --- Start of built-in configuration ---
[ 8.603] Section "Device"
[ 8.603] Identifier "Builtin Default intel Device 0"
[ 8.603] Driver "intel"
[ 8.603] EndSection
[ 8.603] Section "Screen"
[ 8.603] Identifier "Builtin Default intel Screen 0"
[ 8.603] Device "Builtin Default intel Device 0"
[ 8.603] EndSection
[ 8.603] Section "Device"
[ 8.603] Identifier "Builtin Default modesetting Device 0"
[ 8.603] Driver "modesetting"
[ 8.603] EndSection
[ 8.603] Section "Screen"
[ 8.603] Identifier "Builtin Default modesetting Screen 0"
[ 8.603] Device "Builtin Default modesetting Device 0"
[ 8.603] EndSection
[ 8.603] Section "Device"
[ 8.603] Identifier "Builtin Default scfb Device 0"
[ 8.603] Driver "scfb"
[ 8.603] EndSection
[ 8.603] Section "Screen"
[ 8.603] Identifier "Builtin Default scfb Screen 0"
[ 8.603] Device "Builtin Default scfb Device 0"
[ 8.603] EndSection
[ 8.603] Section "Device"
[ 8.603] Identifier "Builtin Default vesa Device 0"
[ 8.603] Driver "vesa"
[ 8.603] EndSection
[ 8.603] Section "Screen"
[ 8.603] Identifier "Builtin Default vesa Screen 0"
[ 8.603] Device "Builtin Default vesa Device 0"
[ 8.603] EndSection
[ 8.603] Section "ServerLayout"
[ 8.603] Identifier "Builtin Default Layout"
[ 8.603] Screen "Builtin Default intel Screen 0"
[ 8.603] Screen "Builtin Default modesetting Screen 0"
[ 8.603] Screen "Builtin Default scfb Screen 0"
[ 8.603] Screen "Builtin Default vesa Screen 0"
[ 8.603] EndSection
[ 8.603] (==) --- End of built-in configuration ---
[ 8.603] (==) ServerLayout "Builtin Default Layout"
[ 8.603] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 8.603] (**) | |-->Monitor "<default monitor>"
[ 8.603] (**) | |-->Device "Builtin Default intel Device 0"
[ 8.603] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 8.603] (**) |-->Screen "Builtin Default modesetting Screen 0" (1)
[ 8.603] (**) | |-->Monitor "<default monitor>"
[ 8.603] (**) | |-->Device "Builtin Default modesetting Device 0"
[ 8.603] (==) No monitor specified for screen "Builtin Default modesetting Screen 0".
Using a default monitor configuration.
[ 8.603] (**) |-->Screen "Builtin Default scfb Screen 0" (2)
[ 8.603] (**) | |-->Monitor "<default monitor>"
[ 8.603] (**) | |-->Device "Builtin Default scfb Device 0"
[ 8.603] (==) No monitor specified for screen "Builtin Default scfb Screen 0".
Using a default monitor configuration.
[ 8.603] (**) |-->Screen "Builtin Default vesa Screen 0" (3)
[ 8.603] (**) | |-->Monitor "<default monitor>"
[ 8.604] (**) | |-->Device "Builtin Default vesa Device 0"
[ 8.604] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 8.604] (==) Automatically adding devices
[ 8.604] (==) Automatically enabling devices
[ 8.604] (==) Not automatically adding GPU devices
[ 8.604] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.609] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 8.609] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 8.609] (II) The server relies on devd to provide the list of input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 8.609] (II) LoadModule: "glx"
[ 8.610] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 8.622] (II) Module glx: vendor="X.Org Foundation"
[ 8.622] compiled for 1.18.4, module version = 1.0.0
[ 8.622] ABI class: X.Org Server Extension, version 9.0
[ 8.622] (==) AIGLX enabled
[ 8.622] (II) LoadModule: "intel"
[ 8.623] (WW) Warning, couldn't open module intel
[ 8.623] (II) UnloadModule: "intel"
[ 8.623] (II) Unloading intel
[ 8.623] (EE) Failed to load module "intel" (module does not exist, 0)
[ 8.623] (II) LoadModule: "modesetting"
[ 8.623] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.624] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.624] compiled for 1.18.4, module version = 1.18.4
[ 8.624] Module class: X.Org Video Driver
[ 8.624] ABI class: X.Org Video Driver, version 20.0
[ 8.624] (II) LoadModule: "scfb"
[ 8.624] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
[ 8.624] (II) Module scfb: vendor="X.Org Foundation"
[ 8.624] compiled for 1.18.4, module version = 0.0.4
[ 8.624] ABI class: X.Org Video Driver, version 20.0
[ 8.624] (II) LoadModule: "vesa"
[ 8.624] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 8.625] (II) Module vesa: vendor="X.Org Foundation"
[ 8.625] compiled for 1.18.4, module version = 2.4.0
[ 8.625] Module class: X.Org Video Driver
[ 8.625] ABI class: X.Org Video Driver, version 20.0
[ 8.625] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.625] (II) scfb: driver for wsdisplay framebuffer: scfb
[ 8.625] (II) VESA: driver for VESA chipsets: vesa
[ 8.625] (--) Using syscons driver with X support (version 2.0)
[ 8.625] (++) using VT number 9
[ 8.635] (EE) open /dev/dri/card0: No such file or directory
[ 8.635] (WW) Falling back to old probe method for modesetting
[ 8.635] (EE) open /dev/dri/card0: No such file or directory
[ 8.635] (WW) Falling back to old probe method for scfb
[ 8.635] scfb trace: probe start
[ 8.635] (II) scfb(1): using default device
[ 8.635] scfb trace: probe done
[ 8.635] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 8.635] (EE) Screen 0 deleted because of no matching config section.
[ 8.635] (II) UnloadModule: "modesetting"
[ 8.635] (EE)
Fatal server error:
[ 8.635] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 8.635] (EE)
[ 8.635] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 8.635] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 8.635] (EE)
[ 8.647] (EE) Server terminated with error (1). Closing log file.