Hi i have Acer Aspire 5670 with new bios (had to change it >>ACPI-bug)
and now when wifi works (ACPI disabled)
have another problem :x it connects to AP when i "sit on it"
or from outside of my house
... but connection is very slow 10-60kb (slackware ~1280)
Could you help me? Is it a bad configuration or it's "WPA"enc
Thanks
and now when wifi works (ACPI disabled)
Code:
wpi0@pci0:3:0:0: class=0x028000 card=0x10018086 chip=0x42228086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '10418086 Intel 3945ABG Wireless LAN controller'
class = network
or from outside of my house
... but connection is very slow 10-60kb (slackware ~1280)
Code:
FreeBSD 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Mon Apr 13 13:19:13 IST 2009
root@vatt:/usr/src/sys/i386/compile/VATT i386
Code:
# ifconfig -v wpi0
wpi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether YY:XX:YY:XX:YY:XX
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g (OFDM/54Mbps)
status: associated
ssid MYAP channel 3 (2422 Mhz 11g) bssid YY:XX:YY:XX:YY:XX
authmode WPA privacy ON deftxkey UNDEF
TKIP 2:128-bit
TKIP 3:128-bit powersavemode OFF powersavesleep 100 txpower 50
txpowmax 50.0 rtsthreshold 2346 fragthreshold 2346 bmiss 7
scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11a 7
roam:rate11a 12 roam:rssi11b 7 roam:rate11b 1 roam:rssi11g 7
roam:rate11g 5 -pureg protmode CTS -ht -htcompat -ampdu ampdulimit 8k
ampdudensity - -amsdu -shortgi htprotmode RTSCTS -puren -wme -burst
-ff -dturbo roaming MANUAL bintval 100
Code:
# rc.conf
inetd_enable="NO"
linux_enable="YES"
moused_enable="YES"
sshd_enable="YES"
ifconfig_wpi0="WPA DHCP"
Code:
# cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
ap_scan=1
#
network={
ssid="MYAP"
priority=5
proto=WPA
psk=wpa_passphrase
}
Code:
# dmesg | grep -i wpi0
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xb0200000-0xb0200fff irq 17 at device 0.0 on pci3
wpi0: Ethernet address: XX:YY:XX...
wpi0: [ITHREAD]
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4