Hello! I have a problem.
System:
When I run a command:
It connects to WiFi, but system doesn't obtain ip-address, dns and etc.
My ifconfig:
On router (Keenetic) it doesn't look like connected! I don't see freebsd as connected
My /etc/wpa_supplicant.conf:
There are no error in /var/log/messages. Only this:
But:
- to other WiFi network with similar settings connects perfectly.
- Linux Arch connects to this WiFi network "TLD" with this settings also perfectly.
What's wrong?
System:
FreeBSD 12.1-STABLE
When I run a command:
wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf
It connects to WiFi, but system doesn't obtain ip-address, dns and etc.
My ifconfig:
Code:
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether e:::::f
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
groups: wlan
ssid TLD channel 1 (2412 MHz 11g ht/40+) bssid 04:bf:6d:93:e8:58
regdomain 32924 country CN indoor ecm authmode WPA2/802.11i
privacy ON deftxkey UNDEF AES-CCM 2:128-bit txpower 20 bmiss 7
scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 4 shortgi -ldpc
wme burst roaming MANUAL
media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
status: associated
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
My /etc/wpa_supplicant.conf:
Code:
fast_reauth=1
ap_scan=1
network={
ssid="TLD"
psk="pass"
priority=2
key_mgmt=WPA-PSK
proto=WPA2
pairwise=CCMP
# group=CCMP
}
Code:
May 22 21:01:39 freebsd_tom dhclient[13321]: send_packet: No buffer space available
But:
- to other WiFi network with similar settings connects perfectly.
- Linux Arch connects to this WiFi network "TLD" with this settings also perfectly.
What's wrong?
Last edited by a moderator: