Wireless card supported, but not recognized

Q

Qvin

I'm having problems using my Gigabyte GC-WB150 (Atheros 9485). If I run ifconfig I only see the Ethernet port, but no wlan. I've edited the loader.conf file with
Code: 
if_ath_load="YES"
but the card still isn't detected.

I think it might have to do with this, but how would I install it? I'm sorry, I'm not very experienced with Unix. :\
 
wblock@ said:
What version of FreeBSD have you installed?
Click to expand...

Thanks for replying. I'm running 9.2.

trh411 said:
Did you create the wlan0 interface with something like: ifconfig wlan0 create wlandev ath0. The wlan0 interface does not get created automatically during installation even though it recognizes/supports the wireless device. Since you are using an Atheros card, check out the wireless section of the FreeBSD Handbook http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html which discusses how to set up wireless networking using the ath(4) driver.
Click to expand...

Thanks for replying. I followed the the guide you linked me, but nothing is getting recognized. If I check the boot messages I don't see a ath0 device getting configured. I already tried to create the interface but it tells me that the device isn't configured.
 
The link posted earlier says it will not work in FreeBSD 9, requires -CURRENT, which was FreeBSD 10 at the time.
 
wblock@ said:
The link posted earlier says it will not work in FreeBSD 9, requires -CURRENT, which was FreeBSD 10 at the time.
Click to expand...

It doesn't work in 10.0 either.
 
trh411 said:
Can you provide the output of dmesg and pciconf -l -bcev?
Click to expand...

Here you go:

dmesg:

Code: 
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RC3 #0 r259778: Mon Dec 23 23:27:58 UTC 2013
    root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
module ath_pci already present!
CPU: AMD FX(tm)-8350 Eight-Core Processor            (4017.94-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x600f20  Family = 0x15  Model = 0x2  Stepping = 0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
  Standard Extended Features=0x8<BMI1>
  TSC: P-state invariant, performance statistics
real memory  = 12884901888 (12288 MB)
avail memory = 12414664704 (11839 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfca0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xbe00-0xbeff mem 0xd0000000-0xdfffffff,0xfd180000-0xfd1bffff irq 18 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI (0xaab0) HDA Controller> mem 0xfd1fc000-0xfd1fffff irq 19 at device 0.1 on pci1
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfd0f8000-0xfd0fffff irq 17 at device 0.0 on pci2
xhci0: 64 byte context size.
usbus0 on xhci0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell ATA controller> port 0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb0f mem 0xfddff000-0xfddff1ff irq 18 at device 0.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <network> at device 0.0 (no driver attached)
ahci0: <ATI IXP700 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfdfff000-0xfdfff3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdffe000-0xfdffefff irq 18 at device 18.0 on pci0
usbus1 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdffc000-0xfdffcfff irq 18 at device 19.0 on pci0
usbus3 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdffb000-0xfdffb0ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac0: <ATI SB600 HDA Controller> mem 0xfdff4000-0xfdff7fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <serial bus, FireWire> at device 14.0 (no driver attached)
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdffa000-0xfdffafff irq 18 at device 20.5 on pci0
usbus5 on ohci2
pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci6: <ACPI PCI bus> on pcib6
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x9e00-0x9eff mem 0xfd6ff000-0xfd6fffff,0xfd6f8000-0xfd6fbfff irq 17 at device 0.0 on pci6
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 90:2b:34:36:45:bb
pcib7: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci7: <ACPI PCI bus> on pcib7
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfd5f8000-0xfd5fffff irq 17 at device 0.0 on pci7
xhci1: 64 byte context size.
usbus6 on xhci1
pcib8: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci8: <ACPI PCI bus> on pcib8
atapci1: <Marvell ATA controller> port 0x7f00-0x7f07,0x7e00-0x7e03,0x7d00-0x7d07,0x7c00-0x7c03,0x7b00-0x7b0f mem 0xfd3ff000-0xfd3ff1ff irq 17 at device 0.0 on pci8
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdff9000-0xfdff9fff irq 18 at device 22.0 on pci0
usbus7 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdff8000-0xfdff80ff irq 17 at device 22.2 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci2
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC889 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC889 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa0
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 5.0Gbps Super Speed USB v3.0
usbus7: 12Mbps Full Speed USB v1.0
usbus8: 480Mbps High Speed USB v2.0
ugen6.1: <0x1b6f> at usbus6
uhub0: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
ugen5.1: <ATI> at usbus5
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <0x1b6f> at usbus0
uhub6: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen8.1: <ATI> at usbus8
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
ugen7.1: <ATI> at usbus7
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
uhub1: 2 ports with 2 removable, self powered
uhub8: 4 ports with 4 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <OCZ-AGILITY3 2.22> ATA-8 SATA 3.x device
ada0: Serial Number OCZ-J4929QR0T2BFGF68
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad8
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <Patriot Pyro 332ABBF0> ATA-8 SATA 3.x device
ada1: Serial Number PT1212A00088414
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad10
ada2 at ahcich2 bus 0 scbus4 target 0 lun 0
ada2: <MKNSSDCR60GB 502ABBF0> ATA-8 SATA 3.x device
ada2: Serial Number MKN1225A0000104756
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad12
ada3 at ahcich3 bus 0 scbus5 target 0 lun 0
ada3: <OCZ-AGILITY3 2.22> ATA-8 SATA 3.x device
ada3: Serial Number OCZ-Z05U1XBA8C2TKTF4
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad14
ada4 at ahcich5 bus 0 scbus7 target 0 lun 0
ada4: <Hitachi HDS723020BLA642 MN6OA800> ATA-8 SATA 3.x device
ada4: Serial Number MN1220FA07RAYD
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad18
cd0 at ahcich4 bus 0 scbus6 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GH15L FD6E> Removable CD-ROM SCSI-0 device 
cd0: Serial Number M008C322904
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [4113216 x 2048 byte records]
cd1 at ata4 bus 0 scbus8 target 1 lun 0
cd1: <ASUS DRW-24B3ST 1.00> Removable CD-ROM SCSI-0 device 
cd1: Serial Number BBD0CL330799
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Netvsc initializing... SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 2008972389 Hz quality 1000
ugen1.2: <Logitech> at usbus1
ukbd0: <USB Keyboard> on usbus1
kbd2 at ukbd0
ugen3.2: <SteelSeries> at usbus3
hid_get_item: Number of items truncated to 255
ugen8.2: <Generic> at usbus8
umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.03, addr 2> on usbus8
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:10:0:-1: Attached to scbus10
da0 at umass-sim0 bus 0 scbus10 target 0 lun 0
da0: <Generic Flash Disk 8.00> Removable Direct Access SCSI-2 device 
da0: Serial Number 2569D54E
da0: 40.000MB/s transfers
da0: 4000MB (8192000 512 byte sectors: 255H 63S/T 509C)
da0: quirks=0x2<NO_6_BYTE>
ugen8.3: <Verbatim> at usbus8
umass1: <Verbatim STORE N GO, class 0/0, rev 2.00/11.00, addr 3> on usbus8
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:11:1:-1: Attached to scbus11
da1 at umass-sim1 bus 1 scbus11 target 0 lun 0
da1: <Verbatim STORE N GO 1100> Removable Direct Access SCSI-0 device 
da1: Serial Number EA00000000000631
da1: 40.000MB/s transfers
da1: 3870MB (7925760 512 byte sectors: 255H 63S/T 493C)
da1: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus8
Trying to mount root from ufs:/dev/ada2p2 [rw]...
ugen7.2: <Atheros Communications> at usbus7
hid_get_item: Number of items truncated to 255
uhid0: <SteelSeries Kinzu V2 Gaming Mouse, class 0/0, rev 1.10/0.96, addr 2> on usbus3
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
ums0: <SteelSeries Kinzu V2 Gaming Mouse, class 0/0, rev 1.10/0.96, addr 2> on usbus3
uhid1: <USB Keyboard> on usbus1
ums0: 8 buttons and [XYZ] coordinates ID=0
ubt0: <Atheros Communications Bluetooth USB Host Controller, class 224/1, rev 1.10/0.02, addr 2> on usbus7
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()

pciconf -l -bcev:

Code: 
hostb0@pci0:0:0:0:	class=0x060000 card=0x50001458 chip=0x5a141002 rev=0x02 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'RD890 PCI to PCI bridge (external gfx0 port B)'
    class      = bridge
    subclass   = HOST-PCI
    bar   [1c] = type Memory, range 64, base 0xe0000000, size 536870912, enabled
    cap 08[f0] = HT MSI fixed address window enabled at 0xfee00000
    cap 08[c4] = HT slave
    cap 08[40] = HT retry mode
    cap 08[54] = HT unit ID clumping
    cap 08[9c] = HT Gen3
    cap 05[70] = MSI supports 4 messages 
    PCI errors = Received Master-Abort
pcib1@pci0:0:2:0:	class=0x060400 card=0x50001458 chip=0x5a161002 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'RD890 PCI to PCI bridge (PCI express gpp port B)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x16(x16)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message 
    cap 0d[b0] = PCI Bridge card=0x50001458
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
    ecap 000b[100] = Vendor 1 ID 1
    ecap 000d[190] = ACS 1
pcib2@pci0:0:9:0:	class=0x060400 card=0x50001458 chip=0x5a1c1002 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'RD890 PCI to PCI bridge (PCI express gpp port H)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x2)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message 
    cap 0d[b0] = PCI Bridge card=0x50001458
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
    ecap 000b[100] = Vendor 1 ID 1
    ecap 000d[190] = ACS 1
pcib3@pci0:0:10:0:	class=0x060400 card=0x50001458 chip=0x5a1d1002 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'RD890 PCI to PCI bridge (external gfx1 port A)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x2)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message 
    cap 0d[b0] = PCI Bridge card=0x50001458
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
    ecap 000b[100] = Vendor 1 ID 1
    ecap 000d[190] = ACS 1
pcib4@pci0:0:11:0:	class=0x060400 card=0x50001458 chip=0x5a1f1002 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'RD890 PCI to PCI bridge (NB-SB link)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x16)
                 speed 2.5(5.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message 
    cap 0d[b0] = PCI Bridge card=0x50001458
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
    ecap 000b[100] = Vendor 1 ID 1
    ecap 000d[190] = ACS 1
ahci0@pci0:0:17:0:	class=0x010601 card=0xb0021458 chip=0x43911002 rev=0x40 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]'
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0xff00, size 8, enabled
    bar   [14] = type I/O Port, range 32, base 0xfe00, size 4, enabled
    bar   [18] = type I/O Port, range 32, base 0xfd00, size 8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xfc00, size 4, enabled
    bar   [20] = type I/O Port, range 32, base 0xfb00, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xfdfff000, size 1024, enabled
    cap 12[70] = SATA Index-Data Pair
    cap 13[a4] = PCI Advanced Features: FLR TP
ohci0@pci0:0:18:0:	class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfdffe000, size 4096, enabled
ehci0@pci0:0:18:2:	class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfdffd000, size 256, enabled
    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
ohci1@pci0:0:19:0:	class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfdffc000, size 4096, enabled
ehci1@pci0:0:19:2:	class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfdffb000, size 256, enabled
    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0@pci0:0:20:0:	class=0x0c0500 card=0x00000000 chip=0x43851002 rev=0x42 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SBx00 SMBus Controller'
    class      = serial bus
    subclass   = SMBus
hdac0@pci0:0:20:2:	class=0x040300 card=0xa1321458 chip=0x43831002 rev=0x40 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SBx00 Azalia (Intel HDA)'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xfdff4000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
isab0@pci0:0:20:3:	class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x40 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 LPC host controller'
    class      = bridge
    subclass   = PCI-ISA
pcib5@pci0:0:20:4:	class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SBx00 PCI to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
ohci2@pci0:0:20:5:	class=0x0c0310 card=0x50041458 chip=0x43991002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI2 Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfdffa000, size 4096, enabled
pcib6@pci0:0:21:0:	class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
                 speed 2.5(5.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message, 64 bit 
    cap 0d[b0] = PCI Bridge card=0x00001002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
    ecap 000b[100] = Vendor 1 ID 1
pcib7@pci0:0:21:1:	class=0x060400 card=0x00001002 chip=0x43a11002 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message, 64 bit 
    cap 0d[b0] = PCI Bridge card=0x00001002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
    ecap 000b[100] = Vendor 1 ID 1
pcib8@pci0:0:21:2:	class=0x060400 card=0x00001002 chip=0x43a21002 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB900 PCI to PCI bridge (PCIE port 2)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message, 64 bit 
    cap 0d[b0] = PCI Bridge card=0x00001002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
    ecap 000b[100] = Vendor 1 ID 1
ohci3@pci0:0:22:0:	class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfdff9000, size 4096, enabled
ehci2@pci0:0:22:2:	class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfdff8000, size 256, enabled
    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
hostb1@pci0:0:24:0:	class=0x060000 card=0x00000000 chip=0x16001022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 15h Processor Function 0'
    class      = bridge
    subclass   = HOST-PCI
    cap 08[80] = HT host
hostb2@pci0:0:24:1:	class=0x060000 card=0x00000000 chip=0x16011022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 15h Processor Function 1'
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:0:24:2:	class=0x060000 card=0x00000000 chip=0x16021022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 15h Processor Function 2'
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:0:24:3:	class=0x060000 card=0x00000000 chip=0x16031022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 15h Processor Function 3'
    class      = bridge
    subclass   = HOST-PCI
    cap 0f[f0] = unknown
hostb5@pci0:0:24:4:	class=0x060000 card=0x00000000 chip=0x16041022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 15h Processor Function 4'
    class      = bridge
    subclass   = HOST-PCI
hostb6@pci0:0:24:5:	class=0x060000 card=0x00000000 chip=0x16051022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 15h Processor Function 5'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:1:0:0:	class=0x030000 card=0x23191787 chip=0x683d1002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'Cape Verde [Radeon HD 7700 Series]'
    class      = display
    subclass   = VGA
    bar   [10] = type Prefetchable Memory, range 64, base 0xd0000000, size 268435456, enabled
    bar   [18] = type Memory, range 64, base 0xfd180000, size 262144, enabled
    bar   [20] = type I/O Port, range 32, base 0xbe00, size 256, enabled
    cap 09[48] = vendor (length 8)
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[58] = PCI-Express 2 legacy endpoint max data 128(256) link x16(x16)
                 speed 5.0(8.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message, 64 bit 
    ecap 000b[100] = Vendor 1 ID 1
    ecap 0001[150] = AER 2 0 fatal 1 non-fatal 1 corrected
    ecap 0019[270] = PCIe Sec 1 lane errors 0
  PCI-e errors = Correctable Error Detected
                 Non-Fatal Error Detected
                 Unsupported Request Detected
     Non-fatal = Unsupported Request
     Corrected = Advisory Non-Fatal Error
none1@pci0:1:0:1:	class=0x040300 card=0xaab01787 chip=0xaab01002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xfd1fc000, size 16384, enabled
    cap 09[48] = vendor (length 8)
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[58] = PCI-Express 2 legacy endpoint max data 128(256) link x16(x16)
                 speed 5.0(8.0) ASPM disabled(L0s/L1)
    cap 05[a0] = MSI supports 1 message, 64 bit 
    ecap 000b[100] = Vendor 1 ID 1
    ecap 0001[150] = AER 2 0 fatal 1 non-fatal 1 corrected
  PCI-e errors = Correctable Error Detected
                 Non-Fatal Error Detected
                 Unsupported Request Detected
     Non-fatal = Unsupported Request
     Corrected = Advisory Non-Fatal Error
xhci0@pci0:2:0:0:	class=0x0c0330 card=0x50071458 chip=0x70231b6f rev=0x01 hdr=0x00
    vendor     = 'Etron Technology, Inc.'
    device     = 'EJ168 USB 3.0 Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 64, base 0xfd0f8000, size 32768, enabled
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[70] = MSI supports 4 messages, 64 bit, vector masks enabled with 1 message
    cap 10[a0] = PCI-Express 2 endpoint max data 128(1024) FLR link x1(x1)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0003[190] = Serial 1 0101010101010101
atapci0@pci0:3:0:0:	class=0x01018f card=0xb0001458 chip=0x917a1b4b rev=0x11 hdr=0x00
    vendor     = 'Marvell Technology Group Ltd.'
    device     = '88SE9172 SATA III 6Gb/s RAID Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0xdf00, size 8, enabled
    bar   [14] = type I/O Port, range 32, base 0xde00, size 4, enabled
    bar   [18] = type I/O Port, range 32, base 0xdd00, size 8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xdc00, size 4, enabled
    bar   [20] = type I/O Port, range 32, base 0xdb00, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xfddff000, size 512, enabled
    cap 01[40] = powerspec 3  supports D0 D3  current D0
    cap 05[50] = MSI supports 1 message 
    cap 10[70] = PCI-Express 2 legacy endpoint max data 128(512) link x1(x1)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
none2@pci0:4:0:0:	class=0x028000 card=0x21001a3b chip=0x0037168c rev=0x01 hdr=0x00
    vendor     = 'Atheros Communications Inc.'
    class      = network
    bar   [10] = type Memory, range 64, base 0xfdb00000, size 524288, enabled
    cap 01[40] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 4 messages, 64 bit, vector masks 
    cap 10[70] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
                 speed 2.5(2.5) ASPM disabled(L0s/L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0002[140] = VC 1 max VC0
    ecap 0003[160] = Serial 1 0000000000000000
none3@pci0:5:14:0:	class=0x0c0010 card=0x10001458 chip=0x30441106 rev=0xc0 hdr=0x00
    vendor     = 'VIA Technologies, Inc.'
    device     = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller'
    class      = serial bus
    subclass   = FireWire
    bar   [10] = type Memory, range 32, base 0xfdaff000, size 2048, enabled
    bar   [14] = type I/O Port, range 32, base 0xaf00, size 128, enabled
    cap 01[50] = powerspec 2  supports D0 D2 D3  current D0
re0@pci0:6:0:0:	class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x06 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0x9e00, size 256, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xfd6ff000, size 4096, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xfd6f8000, size 16384, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit 
    cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
                 speed 2.5(2.5) ASPM disabled(L0s/L1)
    cap 11[b0] = MSI-X supports 4 messages, enabled
                 Table in map 0x20[0x0], PBA in map 0x20[0x800]
    cap 03[d0] = VPD
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0002[140] = VC 1 max VC0
    ecap 0003[160] = Serial 1 1234567812345678
xhci1@pci0:7:0:0:	class=0x0c0330 card=0x50071458 chip=0x70231b6f rev=0x01 hdr=0x00
    vendor     = 'Etron Technology, Inc.'
    device     = 'EJ168 USB 3.0 Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 64, base 0xfd5f8000, size 32768, enabled
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[70] = MSI supports 4 messages, 64 bit, vector masks enabled with 1 message
    cap 10[a0] = PCI-Express 2 endpoint max data 128(1024) FLR link x1(x1)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0003[190] = Serial 1 0101010101010101
atapci1@pci0:8:0:0:	class=0x01018f card=0xb0001458 chip=0x917a1b4b rev=0x11 hdr=0x00
    vendor     = 'Marvell Technology Group Ltd.'
    device     = '88SE9172 SATA III 6Gb/s RAID Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0x7f00, size 8, enabled
    bar   [14] = type I/O Port, range 32, base 0x7e00, size 4, enabled
    bar   [18] = type I/O Port, range 32, base 0x7d00, size 8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x7c00, size 4, enabled
    bar   [20] = type I/O Port, range 32, base 0x7b00, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xfd3ff000, size 512, enabled
    cap 01[40] = powerspec 3  supports D0 D3  current D0
    cap 05[50] = MSI supports 1 message 
    cap 10[70] = PCI-Express 2 legacy endpoint max data 128(512) link x1(x1)
                 speed 5.0(5.0) ASPM disabled(L0s/L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected

It seems to detect the card, but can't do anything with it.
 
I would post your issue to the freebsd-stable@freebsd.org and/or freebsd-wireless@freebsd.org mailing lists. From what I can gather the ar9485 seems to be supported; I even found a PR logged against it for some non-critical "custom board" issues back in June 2013.

If you do post, include your dmesg and pciconfig output since they will most likely ask for it anyway.
 
You must log in or register to reply here.
Back
Top