I have external USB hard drive, formatted as zfs for backups:
Geom name: da0
Providers:
1. Name: da0
Mediasize: 320072931328 (298G)
Sectorsize: 512
Mode: r1w1e2
descr: Apacer Technology Inc.
ident: 09091808F6
rotationrate: unknown
fwsectors: 63
fwheads: 255
Since that drive is starting to fail, I want to attach other 500G disk and retire current one.
I have very reliable 500G USB hard disk that I am currently using for MacBook Pro (macOS) backups -- so I know it is working well.
When I plug in the drive into FreeBSD machine, on boot or after re-plugging it while machine runs, I get following in dmesg:
Is there something I can test/do in order to get FreeBSD recognizing the disk?
Geom name: da0
Providers:
1. Name: da0
Mediasize: 320072931328 (298G)
Sectorsize: 512
Mode: r1w1e2
descr: Apacer Technology Inc.
ident: 09091808F6
rotationrate: unknown
fwsectors: 63
fwheads: 255
Since that drive is starting to fail, I want to attach other 500G disk and retire current one.
I have very reliable 500G USB hard disk that I am currently using for MacBook Pro (macOS) backups -- so I know it is working well.
When I plug in the drive into FreeBSD machine, on boot or after re-plugging it while machine runs, I get following in dmesg:
Code:
usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
ugen6.2: <Unknown > at usbus6 (disconnected)
uhub_reattach_port: could not allocate new device
Is there something I can test/do in order to get FreeBSD recognizing the disk?