USB/DVI KVM switch recommendations?

H

hemi

I currently have a Windows and FreeBSD machine hooked up to a PS2/VGA KVM switch...Which mostly works fine, PS2 mouse limitations aside. Unfortunately, my PS2-compatible mouse is dying, (good) replacement PS2-compatible mice are getting hard to find and I'm tired of using PS2-to-USB adapters for machines that don't have PS2 ports, so maybe it's time to move into the 2000s and look at USB/DVI KVM switches.

Of course, finding "yes, this works well" type recommendations for a KVM switch as far as FreeBSD goes isn't exactly easy, so I'm hoping that someone can chime in here and say, "yes, I'm using <x> and it works well with FreeBSD." I'd like to find a four-port KVM switch, but all options will be considered.
 
I just bought this 4 port KVM from Monoprice and it's working fine now. At first I had a mouse problem, but a KVM reset fixed that. I also had a bit of a keyboard glitch (it would repeat charters once in a while) and that got fixed with a Startech adapter. I have a fetish for IBM Model 'M' keyboards which are very old fashioned, draw a lot of current, and are PS/2 or DIN only. I think other people wouldn't have the same keyboard problem. I bought this switcher specifically because of the mix and match PS/2 and USB.

I've been running this switcher between a Linux BOX, FreeBSD 9.2 RELEASE (main desktop machine), and my DOS machine (no mouse) for a week now without a single problem.
 
wblock@ said:
SSH and VNC, if adequate, are often less hassle than a KVM.
Click to expand...

You're right about that! I haven't tried VNC, but SSH is wonderful and generally all I need. An SSH client is also available on my 16 bit DOS machine. I get a kick out of being able to operate the other, much more modern, machines from there. However, I got the KVM specifically so I could use the three machines directly. That's probably an unusual need outside of BIOS setup.
 
I have been using an ATEN CS1644 for some years now. Recently, I switched monitors to 2x 2560x1440 and the picture is still as sharp as directly connected to a pc. You can choose to play audio on one pc, connect USB to another, and use the keyboard/mouse/monitor on a third.

It's not a cheap KVM. Also, the USB hub is version 2, but there are probably newer models now.
 
I suggest ConnectPRO 4-port DVI DDM KVM switch - UD-14+ which I had been used for 3 years and there had been no issues with all major OSs- including the newest Windows 8.1 and other Linux releases.

[ You should mention that you actually work for ConnectPRO. -- Mod. ]
 
You must log in or register to reply here.
Back
Top