Just in case someone would find this useful.
I was trying to setup a WIFI hot spot. Looking through the possible hardware, I came across this card. It is very cheap in my area. So I purchased one and tried to setup WIFI. Long story short, I had finally made it work. But I had to add the following
to /etc/systl.conf. Otherwise, the log file will be clobbered with lots of
There is still some message logged. But at least the interrupt storm go away. And so far my local WIFI network works without problem.
I was trying to setup a WIFI hot spot. Looking through the possible hardware, I came across this card. It is very cheap in my area. So I purchased one and tried to setup WIFI. Long story short, I had finally made it work. But I had to add the following
Code:
hw.ath.bstuck=8to /etc/systl.conf. Otherwise, the log file will be clobbered with lots of
Code:
ath0: stuck beacon; resetting (bmiss count 0)
ath0: stuck beacon; resetting (bmiss count 4)
interrupt storm detected on "irq17:"; throttling interrupt sourceThere is still some message logged. But at least the interrupt storm go away. And so far my local WIFI network works without problem.