Thinkpad T480, and it have Intel Graphics 620 and nVidia GeForce MX150.
I am using FreeBSD11.2 release.
Need help...
I already did this:
Run
It has error
I ignore the error.
Put this into /root/xorg.conf.new, in intel Device section
Replace this into nvidia Device section
Run test look's fine, it has an X mouse in middle as usual.
Let's run gnome.
then I got an error
I press Ctrl+Alt+1, the screen show this:
# cat /var/log/Xorg.0.log
and the screen has some hightlight error
I am using FreeBSD11.2 release.
Need help...
I already did this:
Code:
# cd /usr/ports/graphics/drm-next-kmod && make install clean
# pkg install xf86-video-intel
# pkg install avahi
Code:
# in /etc/rc.conf
kld_list="/boot/modules/drm.ko /boot/modules/i915kms.ko"
dbus_enable="YES"
hald_enable="YES"
gdm_enable="YES"
gnome_enable="YES"
avahi_daemon_enable="YES"
Code:
# pkg install nvidia-driver
Code:
# in /etc/rc.conf
linux_enable="YES"
Code:
# in /boot/loader.conf
kern.vty=vt
nvidia_load="YES"
nvidia-modeset_load="YES"
Run
Code:
# Xorg -configure
# cat /var/log/Xorg.0.log
[ 131.058]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 131.058] X Protocol Version 11, Revision 0
[ 131.059] Build Operating System: FreeBSD 11.1-RELEASE-p11 amd64
[ 131.059] Current Operating System: FreeBSD 11.2-RELEASE FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018 root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
[ 131.059] Build Date: 26 July 2018 02:21:48AM
[ 131.059]
[ 131.059] Current version of pixman: 0.34.0
[ 131.059] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 131.059] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 131.060] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 02:24:37 2018
[ 131.060] (II) Loader magic: 0x80fc90
[ 131.060] (II) Module ABI versions:
[ 131.060] X.Org ANSI C Emulation: 0.4
[ 131.060] X.Org Video Driver: 20.0
[ 131.060] X.Org XInput driver : 22.1
[ 131.060] X.Org Server Extension : 9.0
[ 131.060] (--) PCI:*(0:0:2:0) 8086:5917:17aa:225e rev 7, Mem @ 0xdb000000/16777216, 0x60000000/536870912, I/O @ 0x0000e000/64, BIOS @ 0x????????/65536
[ 131.060] (--) PCI: (0:1:0:0) 10de:1d10:17aa:225e rev 161, Mem @ 0xdc000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x0000d000/128
[ 131.061] List of video drivers:
[ 131.061] intel
[ 131.061] scfb
[ 131.061] modesetting
[ 131.061] vesa
[ 131.061] nvidia
[ 131.061] (II) LoadModule: "intel"
[ 131.062] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 131.062] (II) Module intel: vendor="X.Org Foundation"
[ 131.062] compiled for 1.18.4, module version = 2.99.917
[ 131.062] Module class: X.Org Video Driver
[ 131.062] ABI class: X.Org Video Driver, version 20.0
[ 131.062] (II) LoadModule: "scfb"
[ 131.063] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
[ 131.063] (II) Module scfb: vendor="X.Org Foundation"
[ 131.063] compiled for 1.18.4, module version = 0.0.4
[ 131.063] ABI class: X.Org Video Driver, version 20.0
[ 131.063] (II) LoadModule: "modesetting"
[ 131.064] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
[ 131.064] (II) Module modesetting: vendor="X.Org Foundation"
[ 131.064] compiled for 1.18.4, module version = 1.18.4
[ 131.064] Module class: X.Org Video Driver
[ 131.064] ABI class: X.Org Video Driver, version 20.0
[ 131.064] (II) LoadModule: "vesa"
[ 131.064] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 131.064] (II) Module vesa: vendor="X.Org Foundation"
[ 131.064] compiled for 1.18.4, module version = 2.4.0
[ 131.065] Module class: X.Org Video Driver
[ 131.065] ABI class: X.Org Video Driver, version 20.0
[ 131.065] (II) LoadModule: "nvidia"
[ 131.065] (II) Loading /usr/local/lib/xorg/modules/drivers/nvidia_drv.so
[ 131.074] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 131.074] compiled for 4.0.2, module version = 1.0.0
[ 131.074] Module class: X.Org Video Driver
[ 131.075] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 131.077] (II) intel: Driver for Intel(R) HD Graphics
[ 131.077] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 131.077] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 131.077] (WW) Falling back to old probe method for scfb
[ 131.077] scfb trace: probe start
[ 131.077] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 131.077] (II) VESA: driver for VESA chipsets: vesa
[ 131.078] (II) NVIDIA dlloader X Driver 390.77 Tue Jul 10 21:28:30 PDT 2018
[ 131.078] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 131.080] (++) Using config file: "/root/xorg.conf.new"
[ 131.080] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 131.080] (==) ServerLayout "X.org Configured"
[ 131.080] (**) |-->Screen "Screen0" (0)
[ 131.080] (**) | |-->Monitor "Monitor0"
[ 131.081] (**) | |-->Device "Card0"
[ 131.081] (**) |-->Screen "Screen1" (1)
[ 131.081] (**) | |-->Monitor "Monitor1"
[ 131.081] (**) | |-->Device "Card1"
[ 131.081] (**) |-->Input Device "Mouse0"
[ 131.081] (**) |-->Input Device "Keyboard0"
[ 131.081] (==) Automatically adding devices
[ 131.081] (==) Automatically enabling devices
[ 131.081] (==) Not automatically adding GPU devices
[ 131.081] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 131.082] (**) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 131.082] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 131.082] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 131.082] (WW) Disabling Mouse0
[ 131.082] (WW) Disabling Keyboard0
[ 131.082] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 131.083] (WW) Falling back to old probe method for modesetting
[ 131.084] (EE)
[ 131.084] (EE) Backtrace:
[ 131.086] (EE) 0: /usr/local/bin/Xorg (OsInit+0x37a) [0x5a61ca]
[ 131.087] (EE) 1: /lib/libthr.so.3 (_pthread_sigmask+0x544) [0x8025f3db4]
[ 131.089] (EE) 2: /lib/libthr.so.3 (_pthread_getspecific+0xe12) [0x8025f3b82]
[ 131.090] (EE) 3: ? (?+0xe12) [0x7ffffffffe15]
[ 131.091] (EE) 4: ? (?+0xe12) [0xe12]
[ 131.092] (EE) 5: /usr/local/bin/Xorg (InitOutput+0x1208) [0x47f3f8]
[ 131.094] (EE) 6: /usr/local/bin/Xorg (remove_fs_handlers+0x374) [0x43aa14]
[ 131.095] (EE) 7: /usr/local/bin/Xorg (_start+0x17f) [0x42522f]
[ 131.096] (EE) 8: ? (?+0x17f) [0x80082f17f]
[ 131.096] (EE)
[ 131.096] (EE) Segmentation fault at address 0x0
[ 131.096] (EE)
Fatal server error:
[ 131.097] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 131.097] (EE)
[ 131.097] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 131.097] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 131.097] (EE)
[ 131.097] (EE) Server terminated with error (1). Closing log file.
I ignore the error.
Put this into /root/xorg.conf.new, in intel Device section
Code:
Option "AccelMethod" "SNA"
Code:
Driver "nvidia"
Run test look's fine, it has an X mouse in middle as usual.
Code:
# X -config /root/xorg.conf.new -retro
Let's run gnome.
Code:
# cp /root/xorg.conf.new /etc/X11/xorg.conf
# echo "exec /usr/local/bin/gnome-session" > ~/.xinitrc
# startx
then I got an error
I press Ctrl+Alt+1, the screen show this:
# startx
xauth: file /root/.serverauth.1162 does not exist
xauth: (stdin):1: bad display name ":0" in "add" command
xauth: file /root/.Xauthority does not exist
xauth: (argv):1: bad display name ":0" in "list" command
xauth: file /root/.Xauthority does not exist
xauth: (stdin):1: bad display name ":0" in "add" command
xauth: file /root/.Xauthority does not exist
xauth: (argv):1: bad display name "/unix:0" in "list" command
xauth: file /root/.Xauthority does not exist
xauth: (stdin):1: bad display name "/unix:0" in "add" command
X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 11.1-RELEASE-p11 amd64
Current Operating System: FreeBSD 11.2-RELEASE FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018 root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 26 July 2018 02:21:48AM
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 02:50:38 2018
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
gnome-session-is-accelerated: No hardware 3D support.
Xlib: extension "GLX" missing on display ":0".
gnome-session-check-accelerated: Helper exited with code 256
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
gnome-session-is-accelerated: No hardware 3D support.
Xlib: extension "GLX" missing on display ":0".
gnome-session-check-accelerated: Helper exited with code 256
gnome-session-binary[1178]: WARNING: software acceleration check failed: 子进程退出,代码 1
Xlib: extension "GLX" missing on display ":0".
(gnome-session-failed:1197): Gtk-WARNING **: Allocating size to GtkBox 0x80d19f1d0 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
(gnome-session-failed:1197): Gtk-WARNING **: Allocating size to GtkBox 0x80d19f1d0 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
^Cxinit: connection to X server lost
waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
xauth: file /root/.Xauthority does not exist
xauth: (argv):1: bad display name "/unix:0" in "remove" command
xauth: (argv):1: bad display name ":0" in "remove" command
# cat /var/log/Xorg.0.log
[ 1692.014]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 1692.014] X Protocol Version 11, Revision 0
[ 1692.014] Build Operating System: FreeBSD 11.1-RELEASE-p11 amd64
[ 1692.015] Current Operating System: FreeBSD 11.2-RELEASE FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018 root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
[ 1692.015] Build Date: 26 July 2018 02:21:48AM
[ 1692.015]
[ 1692.015] Current version of pixman: 0.34.0
[ 1692.015] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1692.015] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1692.015] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 02:50:38 2018
[ 1692.016] (==) Using config file: "/etc/X11/xorg.conf"
[ 1692.016] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 1692.016] (==) ServerLayout "X.org Configured"
[ 1692.016] (**) |-->Screen "Screen0" (0)
[ 1692.016] (**) | |-->Monitor "Monitor0"
[ 1692.017] (**) | |-->Device "Card0"
[ 1692.017] (**) |-->Screen "Screen1" (1)
[ 1692.017] (**) | |-->Monitor "Monitor1"
[ 1692.017] (**) | |-->Device "Card1"
[ 1692.017] (**) |-->Input Device "Mouse0"
[ 1692.017] (**) |-->Input Device "Keyboard0"
[ 1692.017] (==) Automatically adding devices
[ 1692.017] (==) Automatically enabling devices
[ 1692.017] (==) Not automatically adding GPU devices
[ 1692.017] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1692.018] (**) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 1692.018] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 1692.018] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1692.018] (WW) Disabling Mouse0
[ 1692.018] (WW) Disabling Keyboard0
[ 1692.018] (II) Loader magic: 0x80fc90
[ 1692.018] (II) Module ABI versions:
[ 1692.018] X.Org ANSI C Emulation: 0.4
[ 1692.018] X.Org Video Driver: 20.0
[ 1692.018] X.Org XInput driver : 22.1
[ 1692.018] X.Org Server Extension : 9.0
[ 1692.018] (--) PCI:*(0:0:2:0) 8086:5917:17aa:225e rev 7, Mem @ 0xdb000000/16777216, 0x60000000/536870912, I/O @ 0x0000e000/64, BIOS @ 0x????????/65536
[ 1692.019] (--) PCI: (0:1:0:0) 10de:1d10:17aa:225e rev 161, Mem @ 0xdc000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x0000d000/128
[ 1692.019] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 1692.019] (II) LoadModule: "glx"
[ 1692.019] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 1692.034] (II) Module glx: vendor="NVIDIA Corporation"
[ 1692.034] compiled for 4.0.2, module version = 1.0.0
[ 1692.034] Module class: X.Org Server Extension
[ 1692.034] (II) NVIDIA GLX Module 390.77 Tue Jul 10 21:49:55 PDT 2018
[ 1692.034] (II) LoadModule: "intel"
[ 1692.035] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 1692.035] (II) Module intel: vendor="X.Org Foundation"
[ 1692.036] compiled for 1.18.4, module version = 2.99.917
[ 1692.036] Module class: X.Org Video Driver
[ 1692.036] ABI class: X.Org Video Driver, version 20.0
[ 1692.036] (II) LoadModule: "nvidia"
[ 1692.036] (II) Loading /usr/local/lib/xorg/modules/drivers/nvidia_drv.so
[ 1692.037] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1692.037] compiled for 4.0.2, module version = 1.0.0
[ 1692.037] Module class: X.Org Video Driver
[ 1692.037] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1692.039] (II) intel: Driver for Intel(R) HD Graphics
[ 1692.039] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 1692.039] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 1692.039] (II) NVIDIA dlloader X Driver 390.77 Tue Jul 10 21:28:30 PDT 2018
[ 1692.039] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1692.039] (--) Using syscons driver with X support (version 2.0)
[ 1692.039] (--) using VT number 10
[ 1692.050] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 1692.050] (II) Loading sub module "fb"
[ 1692.050] (II) LoadModule: "fb"
[ 1692.051] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 1692.052] (II) Module fb: vendor="X.Org Foundation"
[ 1692.052] compiled for 1.18.4, module version = 1.0.0
[ 1692.052] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1692.052] (II) Loading sub module "wfb"
[ 1692.052] (II) LoadModule: "wfb"
[ 1692.052] (II) Loading /usr/local/lib/xorg/modules/libwfb.so
[ 1692.052] (II) Module wfb: vendor="X.Org Foundation"
[ 1692.053] compiled for 1.18.4, module version = 1.0.0
[ 1692.053] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1692.053] (II) Loading sub module "ramdac"
[ 1692.053] (II) LoadModule: "ramdac"
[ 1692.053] (II) Module "ramdac" already built-in
[ 1692.053] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 1692.054] (--) intel(0): gen9 engineering sample
[ 1692.054] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 1692.054] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1692.054] (==) intel(0): RGB weight 888
[ 1692.054] (==) intel(0): Default visual is TrueColor
[ 1692.054] (**) intel(0): Option "AccelMethod" "SNA"
[ 1692.055] (II) intel(0): Output eDP1 using monitor section Monitor0
[ 1692.056] (II) intel(0): Enabled output eDP1
[ 1692.056] (II) intel(0): Output DP1 has no monitor section
[ 1692.056] (II) intel(0): Enabled output DP1
[ 1692.056] (II) intel(0): Output HDMI1 has no monitor section
[ 1692.056] (II) intel(0): Enabled output HDMI1
[ 1692.056] (II) intel(0): Output DP2 has no monitor section
[ 1692.056] (II) intel(0): Enabled output DP2
[ 1692.057] (II) intel(0): Output HDMI2 has no monitor section
[ 1692.057] (II) intel(0): Enabled output HDMI2
[ 1692.057] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 1692.057] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 1692.057] (II) intel(0): Enabled output VIRTUAL1
[ 1692.057] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 1692.057] (==) intel(0): TearFree disabled
[ 1692.057] (==) intel(0): DPI set to (96, 96)
[ 1692.057] (II) Loading sub module "dri3"
[ 1692.058] (II) LoadModule: "dri3"
[ 1692.058] (II) Module "dri3" already built-in
[ 1692.058] (II) Loading sub module "dri2"
[ 1692.058] (II) LoadModule: "dri2"
[ 1692.058] (II) Module "dri2" already built-in
[ 1692.058] (II) Loading sub module "present"
[ 1692.058] (II) LoadModule: "present"
[ 1692.058] (II) Module "present" already built-in
[ 1692.058] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 1692.058] (==) NVIDIA(1): RGB weight 888
[ 1692.058] (==) NVIDIA(1): Default visual is TrueColor
[ 1692.058] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 1692.058] (**) NVIDIA(1): Enabling 2D acceleration
[ 1692.068] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 1692.068] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 1692.068] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 1692.068] (EE) NVIDIA(GPU-0): README for additional information.
[ 1692.068] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 1692.068] (EE) NVIDIA(1): Failing initialization of X screen 1
[ 1692.068] (II) UnloadModule: "nvidia"
[ 1692.068] (II) UnloadSubModule: "wfb"
[ 1692.068] (II) UnloadSubModule: "fb"
[ 1692.068] (==) Depth 24 pixmap format is 32 bpp
[ 1692.069] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[ 1692.069] (==) intel(0): Backing store enabled
[ 1692.069] (==) intel(0): Silken mouse enabled
[ 1692.069] (II) intel(0): HW Cursor enabled
[ 1692.069] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1692.070] (==) intel(0): DPMS enabled
[ 1692.070] (II) intel(0): [DRI2] Setup complete
[ 1692.070] (II) intel(0): [DRI2] DRI driver: i965
[ 1692.070] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 1692.070] (II) intel(0): direct rendering: DRI2 enabled
[ 1692.070] (II) intel(0): hardware support for Present enabled
[ 1692.070] (--) RandR disabled
[ 1692.089] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 1692.094] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1692.099] (II) intel(0): Setting screen physical size to 508 x 285
[ 1692.315] (II) config/devd: probing input devices...
[ 1692.315] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 1692.315] (II) LoadModule: "kbd"
[ 1692.316] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 1692.316] (II) Module kbd: vendor="X.Org Foundation"
[ 1692.316] compiled for 1.18.4, module version = 1.9.0
[ 1692.316] Module class: X.Org XInput Driver
[ 1692.316] ABI class: X.Org XInput driver, version 22.1
[ 1692.316] (II) Using input driver 'kbd' for 'kbdmux'
[ 1692.316] (**) kbdmux: always reports core events
[ 1692.316] (**) kbdmux: always reports core events
[ 1692.316] (**) Option "Protocol" "standard"
[ 1692.316] (**) Option "XkbRules" "base"
[ 1692.316] (**) Option "XkbModel" "pc105"
[ 1692.316] (**) Option "XkbLayout" "us"
[ 1692.316] (**) Option "config_info" "devd:kbdmux"
[ 1692.316] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 1692.318] (II) config/devd: kbdmux is enabled, ignoring device ukbd0
[ 1692.318] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[ 1692.318] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 1692.318] (II) LoadModule: "mouse"
[ 1692.318] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 1692.318] (II) Module mouse: vendor="X.Org Foundation"
[ 1692.318] compiled for 1.18.4, module version = 1.9.3
[ 1692.318] Module class: X.Org XInput Driver
[ 1692.318] ABI class: X.Org XInput driver, version 22.1
[ 1692.318] (II) Using input driver 'mouse' for 'sysmouse'
[ 1692.319] (**) sysmouse: always reports core events
[ 1692.319] (**) Option "Device" "/dev/sysmouse"
[ 1692.319] (==) sysmouse: Protocol: "Auto"
[ 1692.319] (**) sysmouse: always reports core events
[ 1692.319] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 1692.319] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 1692.319] (**) sysmouse: Buttons: 5
[ 1692.319] (**) Option "config_info" "devd:sysmouse"
[ 1692.319] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 1692.319] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 1692.319] (**) sysmouse: (accel) acceleration profile 0
[ 1692.319] (**) sysmouse: (accel) acceleration factor: 2.000
[ 1692.319] (**) sysmouse: (accel) acceleration threshold: 4
[ 1692.319] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 1692.319] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 1692.319] (II) config/devd: device /dev/ums0 already opened
[ 1692.319] (II) config/devd: device /dev/psm0 already opened
[ 1694.091] (II) intel(0): EDID vendor "LGD", prod id 1313
[ 1694.091] (II) intel(0): Printing DDC gathered Modelines:
[ 1694.091] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 1694.091] (II) intel(0): Modeline "1920x1080"x0.0 110.92 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.3 kHz e)
[ 1704.997] (II) config/devd: terminating backend...
[ 1704.997] (II) UnloadModule: "mouse"
[ 1704.997] (II) UnloadModule: "kbd"
[ 1705.014] (II) Server terminated successfully (0). Closing log file.
and the screen has some hightlight error
Code:
hdacc1: Unexpected unsolicited response with tag 63: ffffffff
hdacc1: Unexpected unsolicited response with tag 63: ffffffff
hdac0: Command timeout on address 2
hdac0: Command timeout on address 2
Code:
NVRM: failed to copy vbios to system memory.
NVRM: RmInitAdapter failed! (0x30:0xffff:663)
nvidia1: NVRM: rm_init_adapter() failed!