Why don't other dvd's mount? Only the FreeBSD Release 13 DVD 1 will mount.
The system is newly rebooted
I placed a dvd, containing data files, into the dvd tray
I put the 13_0_RELEASE_AMD64_CD disk in the dvd tray and the dvd drive spins up and then display gpart info:
NOTE: At this point,
but, I follow the instructions, instead, as follows:
So, I do this:
The system is newly rebooted
I placed a dvd, containing data files, into the dvd tray
Code:
# mount_cd9660 /dev/cd0 /dvd
mount_cd9660: /dev/cd0: Invalid argument
Code:
root@godzilla:/etc # GEOM_PART: cd0 was automatically resized.
Use ‘gpart commit cd0’ to save changes or ‘gpart undo cd0’ to revert them
g_dev_taste: g_dev_taste(iso9660/13_0_RELEASE_AMD64_CD) failed to g-attach, error=6
# mount_cd9660 /dev/cd0 /dvd
will mount the 13_0_RELEASE_AMD64_CD dvd successfullybut, I follow the instructions, instead, as follows:
Code:
# gpart commit cd0
(cd0:ata4:0:0:0): WRITE(10). CDB: 2a 00 00 00 00 00 00 00 01 00
(cd0:ata4:0:0:0): CAM status: SCSI Status Error
(cd0:ata4:0:0:0): SCSI status: check Condition
(cd0:ata4:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata4:0:0:0): Error 22, Unretryable error
(cd0:ata4:0:0:0): cddone: got error 0x16 back
(cd0:ata4:0:0:0): gpart: Invalid argument
Code:
# camcontrol inquiry cd0
pass1: <ASUS DRW-24B1ST j 1.11> Removable CD-ROM SCSI device
ata4: FAILURE – odd-sized DMA transfer attempt 255 % 2
ata4: setting up DMA failed
pass1: 150,000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8291bytes
Last edited by a moderator: