Based on the release notes, it appears that vertical two-finger scrolling is now supported on at least some Synaptics hardware.
I have a Thinkpad T530, purchased in 2013, which has pretty good hardware compatibility since 10.1. At this point the only thing that eludes me is two-finger scrolling.
I have tried setting the following in /boot/device.hints but it doesn't change anything.
And changing the sysctl value for two_finger_scroll simply disables vertical edge scrolling while not enabling two-finger scrolling.
Maybe someone here has experienced something similar... here are my files.
/boot/loader.conf
/etc/rc.conf
/etc/X11/xorg.conf (snippets)
Then some further investigation of logs:
Complete Xorg.0.log
I have a Thinkpad T530, purchased in 2013, which has pretty good hardware compatibility since 10.1. At this point the only thing that eludes me is two-finger scrolling.
I have tried setting the following in /boot/device.hints but it doesn't change anything.
Code:
hint.psm.0.flags="0x1000"
And changing the sysctl value for two_finger_scroll simply disables vertical edge scrolling while not enabling two-finger scrolling.
Code:
sysctl hw.psm.synaptics.two_finger_scroll=1
hw.psm.synaptics.two_finger_scroll: 0 -> 1
Maybe someone here has experienced something similar... here are my files.
/boot/loader.conf
Code:
hw.psm.synaptics_support="1"
hw.psm.trackpoint_support="1"
# shared memory settings
kern.ipc.shmall=32768
kern.ipc.shmmni=1024
kern.ipc.shmseg=1024
/etc/rc.conf
Code:
hostname="bsd.net"
wlans_iwn0="wlan0"
ifconfig_wlan0="WPA DHCP"
sshd_enable="YES"
moused_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
dbus_enable="YES"
moused_flags="-VH"
/etc/X11/xorg.conf (snippets)
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
. . .
EndSection
Section "Module"
Load "glx"
Load "freetype"
EndSection
. . .
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
. . .
Then some further investigation of logs:
Code:
$ sysctl -a | grep synaptics
hw.psm.synaptics.touchpad_off: 0
hw.psm.synaptics.vscroll_div_max: 150
hw.psm.synaptics.vscroll_div_min: 100
hw.psm.synaptics.vscroll_min_delta: 50
hw.psm.synaptics.vscroll_ver_area: -600
hw.psm.synaptics.vscroll_hor_area: 0
hw.psm.synaptics.taphold_timeout: 125000
hw.psm.synaptics.tap_min_queue: 2
hw.psm.synaptics.tap_max_delta: 80
hw.psm.synaptics.div_len: 100
hw.psm.synaptics.div_max_na: 30
hw.psm.synaptics.div_max: 17
hw.psm.synaptics.div_min: 9
hw.psm.synaptics.weight_len_squared: 2000
hw.psm.synaptics.weight_previous_na: 20
hw.psm.synaptics.weight_previous: 6
hw.psm.synaptics.weight_current: 3
hw.psm.synaptics.multiplicator: 10000
hw.psm.synaptics.window_max: 10
hw.psm.synaptics.window_min: 4
hw.psm.synaptics.na_left: 1600
hw.psm.synaptics.na_bottom: 1408
hw.psm.synaptics.na_right: 563
hw.psm.synaptics.na_top: 1783
hw.psm.synaptics.margin_left: 200
hw.psm.synaptics.margin_bottom: 200
hw.psm.synaptics.margin_right: 200
hw.psm.synaptics.margin_top: 200
hw.psm.synaptics.max_width: 10
hw.psm.synaptics.max_pressure: 220
hw.psm.synaptics.min_pressure: 16
hw.psm.synaptics.two_finger_scroll: 0
hw.psm.synaptics.directional_scrolls: 0
Complete Xorg.0.log
Code:
[ 19.878]
X.Org X Server 1.14.7
Release Date: 2014-06-05
[ 19.878] X Protocol Version 11, Revision 0
[ 19.878] Build Operating System: FreeBSD 10.1-RELEASE-p22 amd64
[ 19.878] Current Operating System: FreeBSD bsd.net 10.2-RELEASE FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
[ 19.878] Build Date: 20 October 2015 03:54:14AM
[ 19.878]
[ 19.878] Current version of pixman: 0.32.6
[ 19.878] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.878] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.878] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 25 11:35:55 2015
[ 19.881] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.881] (==) ServerLayout "X.org Configured"
[ 19.881] (**) |-->Screen "Screen0" (0)
[ 19.881] (**) | |-->Monitor "Monitor0"
[ 19.882] (**) | |-->Device "Card0"
[ 19.882] (**) |-->Screen "Screen1" (1)
[ 19.882] (**) | |-->Monitor "Monitor1"
[ 19.882] (**) | |-->Device "Card1"
[ 19.882] (**) |-->Input Device "Mouse0"
[ 19.882] (**) |-->Input Device "Keyboard0"
[ 19.882] (==) Automatically adding devices
[ 19.882] (==) Automatically enabling devices
[ 19.882] (==) Not automatically adding GPU devices
[ 19.891] (**) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
/usr/local/share/fonts/Droid/,
/usr/local/share/fonts/anonymous-pro/,
/usr/local/share/fonts/dejavu/,
/usr/local/share/fonts/webfonts/,
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 19.891] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 19.891] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 19.891] (WW) Disabling Mouse0
[ 19.891] (WW) Disabling Keyboard0
[ 19.891] (II) Loader magic: 0x7f9af0
[ 19.891] (II) Module ABI versions:
[ 19.891] X.Org ANSI C Emulation: 0.4
[ 19.891] X.Org Video Driver: 14.1
[ 19.891] X.Org XInput driver : 19.1
[ 19.891] X.Org Server Extension : 7.0
[ 19.894] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f6 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/65536
[ 19.894] Initializing built-in extension Generic Event Extension
[ 19.894] Initializing built-in extension SHAPE
[ 19.894] Initializing built-in extension MIT-SHM
[ 19.894] Initializing built-in extension XInputExtension
[ 19.894] Initializing built-in extension XTEST
[ 19.894] Initializing built-in extension BIG-REQUESTS
[ 19.894] Initializing built-in extension SYNC
[ 19.894] Initializing built-in extension XKEYBOARD
[ 19.894] Initializing built-in extension XC-MISC
[ 19.894] Initializing built-in extension XINERAMA
[ 19.894] Initializing built-in extension XFIXES
[ 19.894] Initializing built-in extension RENDER
[ 19.894] Initializing built-in extension RANDR
[ 19.894] Initializing built-in extension COMPOSITE
[ 19.894] Initializing built-in extension DAMAGE
[ 19.894] Initializing built-in extension MIT-SCREEN-SAVER
[ 19.894] Initializing built-in extension DOUBLE-BUFFER
[ 19.894] Initializing built-in extension RECORD
[ 19.894] Initializing built-in extension DPMS
[ 19.894] Initializing built-in extension X-Resource
[ 19.894] Initializing built-in extension XVideo
[ 19.894] Initializing built-in extension XVideo-MotionCompensation
[ 19.894] Initializing built-in extension XFree86-VidModeExtension
[ 19.894] Initializing built-in extension XFree86-DGA
[ 19.894] Initializing built-in extension XFree86-DRI
[ 19.894] Initializing built-in extension DRI2
[ 19.894] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19.894] (II) LoadModule: "glx"
[ 19.895] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 19.898] (II) Module glx: vendor="X.Org Foundation"
[ 19.898] compiled for 1.14.7, module version = 1.0.0
[ 19.898] ABI class: X.Org Server Extension, version 7.0
[ 19.898] (==) AIGLX enabled
[ 19.899] Loading extension GLX
[ 19.899] (II) LoadModule: "intel"
[ 19.900] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 19.904] (II) Module intel: vendor="X.Org Foundation"
[ 19.904] compiled for 1.14.7, module version = 2.21.15
[ 19.904] Module class: X.Org Video Driver
[ 19.904] ABI class: X.Org Video Driver, version 14.1
[ 19.904] (II) LoadModule: "vesa"
[ 19.904] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 19.905] (II) Module vesa: vendor="X.Org Foundation"
[ 19.905] compiled for 1.14.7, module version = 2.3.3
[ 19.905] Module class: X.Org Video Driver
[ 19.905] ABI class: X.Org Video Driver, version 14.1
[ 19.905] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 19.905] (II) VESA: driver for VESA chipsets: vesa
[ 19.905] (--) Using syscons driver with X support (version 2.0)
[ 19.905] (--) using VT number 9
[ 20.829] (WW) Falling back to old probe method for vesa
[ 20.829] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 20.829] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.829] (==) intel(0): RGB weight 888
[ 20.829] (==) intel(0): Default visual is TrueColor
[ 20.829] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 20.829] (**) intel(0): Relaxed fencing enabled
[ 20.829] (**) intel(0): Wait on SwapBuffers? enabled
[ 20.829] (**) intel(0): Triple buffering? enabled
[ 20.829] (**) intel(0): Framebuffer tiled
[ 20.829] (**) intel(0): Pixmaps tiled
[ 20.829] (**) intel(0): 3D buffers tiled
[ 20.829] (**) intel(0): SwapBuffers wait enabled
[ 20.829] (==) intel(0): video overlay key set to 0x101fe
[ 20.829] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 20.830] (II) intel(0): Output VGA1 has no monitor section
[ 21.036] (II) intel(0): Output HDMI1 has no monitor section
[ 21.054] (II) intel(0): Output DP1 has no monitor section
[ 21.064] (II) intel(0): Output HDMI2 has no monitor section
[ 21.074] (II) intel(0): Output HDMI3 has no monitor section
[ 21.092] (II) intel(0): Output DP2 has no monitor section
[ 21.110] (II) intel(0): Output DP3 has no monitor section
[ 21.111] (II) intel(0): EDID for output LVDS1
[ 21.111] (II) intel(0): Manufacturer: LEN Model: 40b1 Serial#: 0
[ 21.111] (II) intel(0): Year: 2009 Week: 0
[ 21.111] (II) intel(0): EDID Version: 1.3
[ 21.111] (II) intel(0): Digital Display Input
[ 21.111] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 21.111] (II) intel(0): Gamma: 2.20
[ 21.111] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 21.112] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 21.112] (II) intel(0): First detailed timing is preferred mode
[ 21.112] (II) intel(0): redX: 0.610 redY: 0.348 greenX: 0.316 greenY: 0.589
[ 21.112] (II) intel(0): blueX: 0.151 blueY: 0.066 whiteX: 0.313 whiteY: 0.329
[ 21.112] (II) intel(0): Manufacturer's mask: 0
[ 21.112] (II) intel(0): Supported detailed timing:
[ 21.112] (II) intel(0): clock: 108.5 MHz Image Size: 345 x 194 mm
[ 21.112] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
[ 21.112] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
[ 21.112] (II) intel(0): Supported detailed timing:
[ 21.112] (II) intel(0): clock: 90.4 MHz Image Size: 345 x 194 mm
[ 21.112] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
[ 21.112] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
[ 21.112] (II) intel(0): Unknown vendor-specific block f
[ 21.112] (II) intel(0): LP156WD1-TLB2
[ 21.112] (II) intel(0): EDID (in hex):
[ 21.112] (II) intel(0): 00ffffffffffff0030aeb14000000000
[ 21.112] (II) intel(0): 0013010380231378ea43c59c59519626
[ 21.112] (II) intel(0): 11505400000001010101010101010101
[ 21.112] (II) intel(0): 010101010101622a404061842a303020
[ 21.112] (II) intel(0): 350059c2100000195323404061842a30
[ 21.112] (II) intel(0): 3020350059c2100000190000000f00a9
[ 21.112] (II) intel(0): 0932a9092816090030e40002000000fe
[ 21.112] (II) intel(0): 004c503135365744312d544c423200e2
[ 21.112] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 21.112] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 21.112] (II) intel(0): Printing probed modes for output LVDS1
[ 21.112] (II) intel(0): Modeline "1600x900"x60.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz eP)
[ 21.112] (II) intel(0): Modeline "1600x900"x50.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz e)
[ 21.112] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 21.112] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 21.112] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 21.112] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 21.112] (II) intel(0): EDID for output VGA1
[ 21.318] (II) intel(0): EDID for output HDMI1
[ 21.336] (II) intel(0): EDID for output DP1
[ 21.346] (II) intel(0): EDID for output HDMI2
[ 21.356] (II) intel(0): EDID for output HDMI3
[ 21.374] (II) intel(0): EDID for output DP2
[ 21.392] (II) intel(0): EDID for output DP3
[ 21.392] (II) intel(0): Output LVDS1 connected
[ 21.392] (II) intel(0): Output VGA1 disconnected
[ 21.392] (II) intel(0): Output HDMI1 disconnected
[ 21.392] (II) intel(0): Output DP1 disconnected
[ 21.392] (II) intel(0): Output HDMI2 disconnected
[ 21.392] (II) intel(0): Output HDMI3 disconnected
[ 21.392] (II) intel(0): Output DP2 disconnected
[ 21.392] (II) intel(0): Output DP3 disconnected
[ 21.392] (II) intel(0): Using exact sizes for initial modes
[ 21.392] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 21.392] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.392] (II) intel(0): Kernel page flipping support detected, enabling
[ 21.392] (==) intel(0): DPI set to (96, 96)
[ 21.392] (II) Loading sub module "fb"
[ 21.392] (II) LoadModule: "fb"
[ 21.392] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 21.394] (II) Module fb: vendor="X.Org Foundation"
[ 21.394] compiled for 1.14.7, module version = 1.0.0
[ 21.394] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.394] (II) Loading sub module "dri2"
[ 21.394] (II) LoadModule: "dri2"
[ 21.394] (II) Module "dri2" already built-in
[ 21.394] (II) UnloadModule: "vesa"
[ 21.394] (II) Unloading vesa
[ 21.394] (==) Depth 24 pixmap format is 32 bpp
[ 21.394] (II) intel(0): [DRI2] Setup complete
[ 21.394] (II) intel(0): [DRI2] DRI driver: i965
[ 21.395] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 21.398] (II) UXA(0): Driver registered support for the following operations:
[ 21.398] (II) solid
[ 21.398] (II) copy
[ 21.398] (II) composite (RENDER acceleration)
[ 21.398] (II) put_image
[ 21.398] (II) get_image
[ 21.398] (==) intel(0): Backing store disabled
[ 21.398] (==) intel(0): Silken mouse enabled
[ 21.399] (II) intel(0): Initializing HW Cursor
[ 21.399] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.400] (==) intel(0): DPMS enabled
[ 21.400] (==) intel(0): Intel XvMC decoder enabled
[ 21.400] (II) intel(0): Set up textured video
[ 21.401] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 21.401] (II) intel(0): direct rendering: DRI2 Enabled
[ 21.415] (--) RandR disabled
[ 21.489] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.489] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.489] (II) AIGLX: enabled GLX_ARB_create_context
[ 21.489] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 21.489] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 21.489] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.489] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.489] (II) AIGLX: Loaded and initialized i965
[ 21.489] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.490] (II) intel(0): Setting screen physical size to 423 x 238
[ 21.634] (II) config/devd: probing input devices...
[ 21.634] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 21.634] (II) LoadModule: "kbd"
[ 21.635] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 21.635] (II) Module kbd: vendor="X.Org Foundation"
[ 21.635] compiled for 1.14.7, module version = 1.8.0
[ 21.635] Module class: X.Org XInput Driver
[ 21.635] ABI class: X.Org XInput driver, version 19.1
[ 21.635] (II) Using input driver 'kbd' for 'kbdmux'
[ 21.635] (**) kbdmux: always reports core events
[ 21.635] (**) kbdmux: always reports core events
[ 21.635] (**) Option "Protocol" "standard"
[ 21.635] (**) Option "XkbRules" "base"
[ 21.635] (**) Option "XkbModel" "pc105"
[ 21.635] (**) Option "XkbLayout" "us"
[ 21.635] (**) Option "config_info" "devd:kbdmux"
[ 21.635] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 21.637] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[ 21.637] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 21.637] (II) LoadModule: "mouse"
[ 21.637] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 21.639] (II) Module mouse: vendor="X.Org Foundation"
[ 21.639] compiled for 1.14.7, module version = 1.9.1
[ 21.639] Module class: X.Org XInput Driver
[ 21.639] ABI class: X.Org XInput driver, version 19.1
[ 21.639] (II) Using input driver 'mouse' for 'sysmouse'
[ 21.639] (**) sysmouse: always reports core events
[ 21.639] (**) Option "Device" "/dev/sysmouse"
[ 21.639] (==) sysmouse: Protocol: "Auto"
[ 21.639] (**) sysmouse: always reports core events
[ 21.639] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 21.639] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 21.639] (**) sysmouse: Buttons: 5
[ 21.639] (**) Option "config_info" "devd:sysmouse"
[ 21.639] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 21.639] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 21.639] (**) sysmouse: (accel) acceleration profile 0
[ 21.639] (**) sysmouse: (accel) acceleration factor: 2.000
[ 21.639] (**) sysmouse: (accel) acceleration threshold: 4
[ 21.639] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 21.639] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 21.639] (II) config/devd: device /dev/psm0 already opened
$ dmesg | grep psm
Code:
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
Last edited: