I have a strange error that's popping up on one of my new servers. My FreeBSD system log is filling with the following error:
It seems to be related to my RAID controller, but nothing is showing up in the system management hardware event logs. It's also triggering the audible alarm, which is a bit annoying.
Our machine room is at 19°C. The only think I could find that might be remotely strange is the following sensor readings:
Here's the obligatory stats:
Has anyone seen anything like that?
Code:
kernel: mfi0: 7392 (318361459s/0x0004/CRIT) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 below error threshold
kernel: mfi0: 7393 (318361579s/0x0004/info) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 returned to normal
kernel: mfi0: 7394 (318362059s/0x0004/CRIT) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 below error threshold
kernel: mfi0: 7395 (318362179s/0x0004/info) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 returned to normal
kernel: mfi0: 7396 (318362419s/0x0004/CRIT) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 below error threshold
kernel: mfi0: 7397 (318362659s/0x0004/info) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 returned to normal
kernel: mfi0: 7398 (318362779s/0x0004/CRIT) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 below error threshold
kernel: mfi0: 7399 (318363019s/0x0004/info) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 returned to normal
kernel: mfi0: 7400 (318363139s/0x0004/CRIT) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 below error threshold
kernel: mfi0: 7401 (318363259s/0x0004/info) - Enclosure PD 00(c Ports 4-7/p1) temperature sensor 1 returned to normalIt seems to be related to my RAID controller, but nothing is showing up in the system management hardware event logs. It's also triggering the audible alarm, which is a bit annoying.
Our machine room is at 19°C. The only think I could find that might be remotely strange is the following sensor readings:
Code:
Sensor ID : P1 Therm Margin (0x99)
Entity ID : 3.1
Sensor Type (Analog) : Temperature
Sensor Reading : -72 (+/- 0) degrees C
Status : ok
Lower Non-Recoverable : na
Lower Critical : na
Lower Non-Critical : na
Upper Non-Critical : na
Upper Critical : na
Upper Non-Recoverable : na
Assertion Events :
Assertions Enabled :
Sensor ID : P1B Therm Margin (0x9c)
Entity ID : 3.3
Sensor Type (Analog) : Temperature
Sensor Reading : -71 (+/- 0) degrees C
Status : ok
Lower Non-Recoverable : na
Lower Critical : na
Lower Non-Critical : na
Upper Non-Critical : na
Upper Critical : na
Upper Non-Recoverable : na
Assertion Events :
Assertions Enabled :
Sensor ID : P1 Therm Ctrl % (0xc0)
Entity ID : 3.1
Sensor Type (Analog) : Temperature
Sensor Reading : 0 (+/- 0.585) unspecified
Status : ok
Lower Non-Recoverable : na
Lower Critical : na
Lower Non-Critical : na
Upper Non-Critical : na
Upper Critical : 49.530
Upper Non-Recoverable : na
Assertion Events :
Assertions Enabled : ucr+
Deassertions Enabled : ucr+Here's the obligatory stats:
Code:
FreeBSD p2100a 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Fri Nov 27 19:27:02 EST 2009 root@p2100a:/usr/obj/usr/src/sys/CUSTOM amd64Has anyone seen anything like that?