Hello!
I am attempting to SSH into this new FreeBSD box I just setup.
What I did was scp my root user RSA key (behind a good firewall) from my CentOS box to the new machine.
From my CentOS box:
Then on the new BSD machine catted it into my authorized_keys file:
PermitRootLogin is enabled and so is the RSAAuthentication, PubkeyAuthentication, and AuthorizedKeysFile file.
Permissions on the authorized_keys file look ok to me!
I made sure to su to root with a dash:
But for some odd reason I see a PAM authentication error for my user account (not root) in /var/log/messages on the BSD box:
And here is the verbose output for an SSH command:
And incidentally I can't ssh at ALL from my user account:
In /var/log/messages on the BSD machineI see yet more PAM authentication errors. But AFAIK I don't even have PAM enabled!
It's commented out! And of course as I've been experimenting to get this to work I have been restarting SSH.
Any help to get my SSH hummin' would be greatly appreciated!
I am attempting to SSH into this new FreeBSD box I just setup.
What I did was scp my root user RSA key (behind a good firewall) from my CentOS box to the new machine.
From my CentOS box:
Code:
[root@lcent5-1:~]$:scp ~/.ssh/id_rsa.pub root@$BSD2:~
Then on the new BSD machine catted it into my authorized_keys file:
Code:
[root@lcent5-1:~]$:ssh $BSD2
Password:
Last login: Tue Aug 17 00:46:28 2010 from 192.168.1.42
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
The Regents of the University of California. All rights reserved.
#########################################################
# SUMMITNJHOME.COM #
# TITLE: FreeBSD 2 BOX #
# LOCATION: SUMMIT BASEMENT #
# #
#########################################################
lbsd8-2# cat id_rsa.pub >> ~/.ssh/authorized_keys
PermitRootLogin is enabled and so is the RSAAuthentication, PubkeyAuthentication, and AuthorizedKeysFile file.
Code:
#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeysFile .ssh/authorized_keys
Permissions on the authorized_keys file look ok to me!
Code:
lbsd8-2# ls -l ~/.ssh/authorized_keys
-rw------- 1 root wheel 824 Aug 17 00:47 /root/.ssh/authorized_keys
I made sure to su to root with a dash:
Code:
[root@lcent5-1:~]$:su - root
But for some odd reason I see a PAM authentication error for my user account (not root) in /var/log/messages on the BSD box:
Code:
Aug 17 00:54:43 lbsd8-2 sshd[2360]: error: PAM: authentication error for illegal user bluethundr from 192.168.1.42
And here is the verbose output for an SSH command:
Code:
[root@lcent5-1:~]$:ssh -vvv $BSD2
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 192.168.1.44 [192.168.1.44] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug3: Not a RSA1 key file /root/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: loaded 3 keys
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.2p1 FreeBSD-20090522
debug1: match: OpenSSH_5.2p1 FreeBSD-20090522 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-
cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-
cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-
group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-
cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-
cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 132/256
debug2: bits set: 532/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 17
debug1: Host '192.168.1.44' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:17
debug2: bits set: 509/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/identity ((nil))
debug2: key: /root/.ssh/id_rsa (0x9790e58)
debug2: key: /root/.ssh/id_dsa ((nil))
debug1: Authentications that can continue: publickey,keyboard-interactive
debug3: start over, passed a different list publickey,keyboard-interactive
debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Offering public key: /root/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,keyboard-interactive
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug2: input_userauth_info_req
debug2: input_userauth_info_req: num_prompts 1
And incidentally I can't ssh at ALL from my user account:
Code:
[root@lcent5-1:~]$:su - bluethundr
[bluethundr@lcent5-1:~]$:ssh $BSD2
Password:
Password:
In /var/log/messages on the BSD machineI see yet more PAM authentication errors. But AFAIK I don't even have PAM enabled!
Code:
Aug 17 00:54:43 lbsd8-2 sshd[2360]: error: PAM: authentication error for illegal user bluethundr from 192.168.1.42
Code:
lbsd8-2# grep -i PAM /etc/ssh/sshd_config
# Change to no to disable PAM authentication
# Set this to 'no' to disable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
#UsePAM yes
It's commented out! And of course as I've been experimenting to get this to work I have been restarting SSH.
Any help to get my SSH hummin' would be greatly appreciated!