Solved Sound/resolution issue

[Noob Noob]

For the sound, i run this command line

saibot@fbsd:/usr/home/saibot $ sysctl hw.snd.default_unit=7
hw.snd.default_unit: 4 -> 7
saibot@fbsd:/usr/home/saibot $

It works but after i restart/shutdown default_unit always back to 4
For the resolution i don't know what to do

saibot@fbsd:/usr/home/saibot $ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
   1024x768       0.00*
   800x600        0.00 
   640x480        0.00 
saibot@fbsd:/usr/home/saibot $ kldstat
Id Refs Address                Size Name
 1   72 0xffffffff80200000  1f11f90 kernel
 2    1 0xffffffff82112000     bdf8 cuse.ko
 3    1 0xffffffff8211e000   6800a0 zfs.ko
 4    1 0xffffffff8279f000     ae38 cryptodev.ko
 5    1 0xffffffff82920000     3378 acpi_wmi.ko
 6    1 0xffffffff82924000     3250 ichsmb.ko
 7    1 0xffffffff82928000     2180 smbus.ko
 8    1 0xffffffff8292b000   107310 nvidia-modeset.ko
 9    1 0xffffffff82c00000  1faac70 nvidia.ko
10    2 0xffffffff82a33000    388f8 linux.ko
11    4 0xffffffff82a6c000     db70 linux_common.ko
12    1 0xffffffff82a7a000     e538 snd_uaudio.ko
13    1 0xffffffff82a89000     2340 uhid.ko
14    1 0xffffffff82a8c000     3380 usbhid.ko
15    1 0xffffffff82a90000     31f8 hidbus.ko
16    1 0xffffffff82a94000     3320 wmt.ko
17    1 0xffffffff82a98000     4350 ums.ko
18    1 0xffffffff82a9d000    30ac8 linux64.ko
19    1 0xffffffff82ace000     2260 pty.ko
saibot@fbsd:/usr/home/saibot $ cat /etc/rc.conf
clear_tmp_enable="YES"
syslogd_flags="-ss"
sendmail_enable="NONE"
hostname="fbsd"
keymap="fr.kbd"
ifconfig_em0="DHCP"
sshd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
zfs_enable="YES"
kld_list="nvidia-modeset"
linux_enable="YES"
dbus_enable="YES"
sddm_enable="YES"
webcamd_enable="YES"
saibot@fbsd:/usr/home/saibot $

 

[Cath O'Deray]

If you want 7 as the default, when FreeBSD starts, then have the line below in your /etc/sysctl.conf

hw.snd.default_unit="7"

sysctl.conf(5)

 

[Noob Noob]

This is my /var/log/Xorg.0.log
And just to be sure how change 'nv' to 'nvidia'
Can't find this : Find the following line in /etc/X11/xorg.conf
https://docs.freebsd.org/doc/7.3-RELEASE/usr/share/doc/en/articles/compiz-fusion/nvidia-setup.html

 

[Noob Noob]

If you want 7 as the default, when FreeBSD starts, then have the line below in your /etc/sysctl.conf

hw.snd.default_unit="7"

sysctl.conf(5)

Thank you, this solve it

 

[SirDice]

Add a /usr/local/etc/X11/xorg.conf.d/driver-nvidia.conf:

Section "Device"
        Identifier "Card0"
        Driver     "nvidia"
EndSection

It doesn't get auto-detected and therefor falls back to scfb(4)

Can't find this : Find the following line in /etc/X11/xorg.conf
https://docs.freebsd.org/doc/7.3-RELEASE/usr/share/doc/en/articles/compiz-fusion/nvidia-setup.html

Those instructions are from 7.3-RELEASE. A version that's been EoL for 12 years.

 

[Noob Noob]

Add a /usr/local/etc/X11/xorg.conf.d/driver-nvidia.conf:

Section "Device"
        Identifier "Card0"
        Driver     "nvidia"
EndSection

It doesn't get auto-detected and therefor falls back to scfb(4)


Those instructions are from 7.3-RELEASE. A version that's been EoL for 12 years.

Thank you, this solve it
Finally finally, Now i can tell to myself Welcome to FreeBSD