I bought a car and for the first time in several years I would like to use my burner in FreeBSD to burn some music cds. I did everything k3b demanded when installing the package.
I have hald and dbus running, restarted devfs and /dev/cd0 and /dev/cdrom and /dev/dvd are now owned by my user. However, k3b started as user complains
starting k3b as root works without flaws, k3b prints on the console:
Any ideas how I can make it run as user?
camcontrol devlist lists <ASUS DRW-1814BLT 1.04> at scbus13 target 0 lun 0 (cd0,pass5) and cdrecord --scanbus lists
Code:
scsibus13:
13,0,0 1300) 'ASUS ' 'DRW-1814BLT ' '1.04' Removable CD-ROMI have hald and dbus running, restarted devfs and /dev/cd0 and /dev/cdrom and /dev/dvd are now owned by my user. However, k3b started as user complains
Code:
(K3b::Device::openDevice) open device /dev/cd0 failed.
Could not initialize device "/dev/cd0"
Devices:
------------------------------
(K3b::Core) System problems:
CRITICAL
PROBLEM: "No optical drive found."
DETAILS: "K3b did not find any optical device in your system."
SOLUTION: ""starting k3b as root works without flaws, k3b prints on the console:
Code:
DiskInfo:
Mediatype: "CD-R"
Current Profile: "CD-R"
Disk state: empty
Empty: true
Rewritable: false
Appendable: false
Sessions: 0
Tracks: 0
Layers: 1
Capacity: "79:57:74" (LBA 359849 ) ( 736970752 Bytes)
Remaining size: "79:57:74" (LBA 359849 ) ( 736970752 Bytes)
Used Size: "00:00:00" (LBA 0 ) ( 0 Bytes)
=====================================================
(K3b::Device::openDevice) open device /dev/cd0 succeeded.
(K3b::Device::ScsiCommand) transport command "TEST UNIT READY" ( "0" ), length: 6
(K3b::Device::ScsiCommand) transport succeeded
(K3b::Device::openDevice) open device /dev/cd0 succeeded.
(K3b::Device::ScsiCommand) transport command "GET CONFIGURATION" ( "46" ), length: 10
(K3b::Device::ScsiCommand) transport succeeded
(K3b::Device::openDevice) open device /dev/cd0 succeeded.
(K3b::Device::ScsiCommand) transport command "MODE SENSE" ( "5a" ), length: 10
(K3b::Device::ScsiCommand) transport succeeded
(K3b::Device::openDevice) open device /dev/cd0 succeeded.
(K3b::Device::Device) "/dev/cd0" : Number of supported write speeds via 2A: 9
(K3b::Device::Device) "/dev/cd0" : 7056 KB/s
(K3b::Device::openDevice) open device /dev/cd0 succeeded.
(K3b::Device::ScsiCommand) transport command "MODE SENSE" ( "5a" ), length: 10
(K3b::Device::ScsiCommand) transport succeeded
(K3b::Device::openDevice) open device /dev/cd0 succeeded.
Devices:
------------------------------
Blockdevice: "/dev/cd0"
Vendor: "ASUS"
Description: "DRW-1814BLT"
Version: "1.04"
Write speed: 7056
Profiles: "DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW"
Read Cap: "DVD-ROM, DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW"
Write Cap: "DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW"
Writing modes: "SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump"Any ideas how I can make it run as user?
