Greetings,
I just try to get 2x Samsung PM1725b 1.6TB PCIe 8x cards working on a Supermicro X11SRM-VF using FreeBSD 12 Release.
is set in /boot/loader.conf
Does anyone have any idea what else to do?
I just try to get 2x Samsung PM1725b 1.6TB PCIe 8x cards working on a Supermicro X11SRM-VF using FreeBSD 12 Release.
Code:
nvme_load="YES"
nvd_load="YES"
nvmecontrol devlist
said "No NVMe controllers found."Does anyone have any idea what else to do?
Code:
# dmesg
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) W-2145 CPU @ 3.70GHz (3696.18-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x50654 Family=0x6 Model=0x55 Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
Structured Extended Features3=0x9c002000<IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 137434759168 (131068 MB)
avail memory = 133534310400 (127348 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-31 on motherboard
ioapic2 <Version 2.0> irqs 32-39 on motherboard
ioapic3 <Version 2.0> irqs 40-47 on motherboard
ioapic4 <Version 2.0> irqs 48-55 on motherboard
Launching APs: 1 14 10 4 8 2 6 12 11 13 9 5 7 15 3
Timecounter "TSC-low" frequency 1848089274 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <dasp, performance counters> at device 8.1 (no driver attached)
xhci0: <Intel Union Point USB 3.0 controller> mem 0xaa310000-0xaa31ffff irq 16 at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Union Point AHCI SATA controller> port 0x5050-0x5057,0x5040-0x5043,0x5020-0x503f mem 0xaa348000-0xaa349fff,0xaa34c000-0xaa34c0ff,0xaa34b000-0xaa34b7ff irq 16 at device 23.0 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x4000-0x401f mem 0xaa200000-0xaa27ffff,0xaa280000-0xaa283fff irq 19 at device 0.0 numa-domain 0 on pci2
igb0: attach_pre capping queues at 4
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 4
igb0: pxm cpus: 8 queue msgs: 4 admincnt: 1
igb0: using 4 rx queues 4 tx queues
igb0: Using MSIX interrupts with 5 vectors
igb0: allocated for 4 tx_queues
igb0: allocated for 4 rx_queues
igb0: Ethernet address: ac:1f:6b:76:f8:fc
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3000-0x301f mem 0xaa100000-0xaa17ffff,0xaa180000-0xaa183fff irq 16 at device 0.0 numa-domain 0 on pci3
igb1: attach_pre capping queues at 4
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 4
igb1: pxm cpus: 8 queue msgs: 4 admincnt: 1
igb1: using 4 rx queues 4 tx queues
igb1: Using MSIX interrupts with 5 vectors
igb1: allocated for 4 tx_queues
igb1: allocated for 4 rx_queues
igb1: Ethernet address: ac:1f:6b:76:f8:fd
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 numa-domain 0 on pci4
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xa9000000-0xa9ffffff,0xaa000000-0xaa01ffff irq 18 at device 0.0 numa-domain 0 on pci5
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Kabylake-H HDA Controller> mem 0xaa320000-0xaa323fff,0xaa300000-0xaa30ffff irq 16 at device 31.3 numa-domain 0 on pci0
pcib6: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pci6: <mass storage, RAID> at device 5.5 (no driver attached)
pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci7
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xdc400000-0xdc7fffff,0xdc804000-0xdc807fff irq 45 at device 0.0 numa-domain 0 on pci8
ix0: using 2048 tx descriptors and 2048 rx descriptors
ix0: msix_init qsets capped at 64
ix0: pxm cpus: 8 queue msgs: 63 admincnt: 1
ix0: using 8 rx queues 8 tx queues
ix0: Using MSIX interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: ac:1f:6b:ac:29:30
ix0: PCI Express Bus: Speed 5.0GT/s Width x4
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xdc000000-0xdc3fffff,0xdc800000-0xdc803fff irq 42 at device 0.1 numa-domain 0 on pci8
ix1: using 2048 tx descriptors and 2048 rx descriptors
ix1: msix_init qsets capped at 64
ix1: pxm cpus: 8 queue msgs: 63 admincnt: 1
ix1: using 8 rx queues 8 tx queues
ix1: Using MSIX interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: ac:1f:6b:ac:29:31
ix1: PCI Express Bus: Speed 5.0GT/s Width x4
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pci7: <mass storage, RAID> at device 5.5 (no driver attached)
pcib9: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pci9: <mass storage, RAID> at device 5.5 (no driver attached)
pci9: <dasp, performance counters> at device 18.0 (no driver attached)
pci9: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_button1: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZ7LH240HAHQ-00005 HXT7104Q> ACS-4 ATA SATA 3.x device
ada0: Serial Number S45RNF0K900126
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <SAMSUNG MZ7LH240HAHQ-00005 HXT7104Q> ACS-4 ATA SATA 3.x device
ada1: Serial Number S45RNF0K900146
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 228936MB (468862128 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Trying to mount root from ufs:/dev/ada0p2 [rw]...
lo0: link state changed to UP
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <Novatek Ultra Flat Keyboard> at usbus0
ukbd0 numa-domain 0 on uhub0
ukbd0: <Novatek Ultra Flat Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
kbd2 at ukbd0
ugen0.3: <vendor 0x0557 product 0x7000> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub1: 4 ports with 3 removable, self powered
ioat0: <SKX IOAT> mem 0xaa344000-0xaa347fff irq 26 at device 4.0 numa-domain 0 on pci0
ioat0: Capabilities: f0006e1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ioat1: <SKX IOAT> mem 0xaa340000-0xaa343fff irq 27 at device 4.1 numa-domain 0 on pci0
ioat1: Capabilities: f0006e1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ioat2: <SKX IOAT> mem 0xaa33c000-0xaa33ffff irq 26 at device 4.2 numa-domain 0 on pci0
ioat2: Capabilities: f0004e1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ioat3: <SKX IOAT> mem 0xaa338000-0xaa33bfff irq 27 at device 4.3 numa-domain 0 on pci0
ioat3: Capabilities: f0004e1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ioat4: <SKX IOAT> mem 0xaa334000-0xaa337fff irq 26 at device 4.4 numa-domain 0 on pci0
ioat4: Capabilities: f0004e1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ioat5: <SKX IOAT> mem 0xaa330000-0xaa333fff irq 27 at device 4.5 numa-domain 0 on pci0
ioat5: Capabilities: f0004e1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ioat6: <SKX IOAT> mem 0xaa32c000-0xaa32ffff irq 26 at device 4.6 numa-domain 0 on pci0
ioat6: Capabilities: f0004e1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ioat7: <SKX IOAT> mem 0xaa328000-0xaa32bfff irq 27 at device 4.7 numa-domain 0 on pci0
ioat7: Capabilities: f0004e1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,Page_Break>
ugen0.4: <vendor 0x0557 product 0x2419> at usbus0
ukbd1 numa-domain 0 on uhub1
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd3 at ukbd1
igb0: link state changed to UP
uhid0 numa-domain 0 on uhub0
uhid0: <Novatek Ultra Flat Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
ums0 numa-domain 0 on uhub1
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
Last edited by a moderator: