Is anything required other than adding snd_hda_load="YES" to /boot/loader.conf?
Just tried the same FreeBSD 12 installation on another machine with ALC892 and no sound there either... Here is what it lists:
I see nothing in the hardware tab of Mate Sound Preferences. One of the possibilities is that the sound defaulted to pcm0 which is not attached anywhere. Are there any "real" mixers out there which can change it to pcm1-4 in this case?
Just tried the same FreeBSD 12 installation on another machine with ALC892 and no sound there either... Here is what it lists:
Code:
# cat /dev/sndstat
Installed devices:
pcm0: <ATI R6xx (HDMI)> (play)
pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> (play/rec) default
pcm2: <Realtek ALC892 (Front Analog)> (play/rec)
pcm3: <Realtek ALC892 (Rear Digital)> (play/rec)
pcm4: <Realtek ALC892 (Onboard Digital)> (play)
No devices installed from userspace.
I see nothing in the hardware tab of Mate Sound Preferences. One of the possibilities is that the sound defaulted to pcm0 which is not attached anywhere. Are there any "real" mixers out there which can change it to pcm1-4 in this case?