I am moving to Hurricane Electric IPv6 pop at the moment and I am having issues connecting to IPv6 with them. I do not know if Hurricane Electric has any client for IPv6 connections.
When I follow their guide, I get this error when creating the tunnel manually.
That stops me from going any further. After this I am not able to create the tunnel and proper routing table for IPv6.
My current IPv6 config looks like this in rc.conf.
For the time being, I have commented out what is not working.
I can ping6 my server on the local LAN without any issue.
Thanks for the help.
When I follow their guide, I get this error when creating the tunnel manually.
Code:
ifconfig gif0 inet6 2001:470:27:3d0::2 2001:470:27:3d0::1 prefixlen 64
ifconfig: ioctl (SIOCAIFADDR): Invalid argument
That stops me from going any further. After this I am not able to create the tunnel and proper routing table for IPv6.
My current IPv6 config looks like this in rc.conf.
Code:
ipv6_network_interfaces="bge0"
ipv6_activate_all_interfaces="YES"
ifconfig_bge0_ipv6="2001:470:28:3d0::3/64"
#gifconfig_gif0="192.168.1.2 216.66.80.90"
#ipv6_ifconfig_gif0="2001:470:27:3d0::2/64 2001:470:27:3d0::1/64"
#gif_interfaces="gif0"
ipv6_gateway_enable="YES"
radvd_enable="yes"
For the time being, I have commented out what is not working.
I can ping6 my server on the local LAN without any issue.
Code:
ping6 -c 4 2001:470:28:3d0::3
PING 2001:470:28:3d0::3(2001:470:28:3d0::3) 56 data bytes
64 bytes from 2001:470:28:3d0::3: icmp_seq=1 ttl=64 time=0.245 ms
64 bytes from 2001:470:28:3d0::3: icmp_seq=2 ttl=64 time=0.302 ms
64 bytes from 2001:470:28:3d0::3: icmp_seq=3 ttl=64 time=0.302 ms
64 bytes from 2001:470:28:3d0::3: icmp_seq=4 ttl=64 time=0.283 ms
--- 2001:470:28:3d0::3 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.245/0.283/0.302/0.023 ms
Thanks for the help.