FreeBSD 9 on external HDD (rack) freezes during both shutdown and reboot since upgraded from 9.0 RC3 to 9.0 stable (any version).
On RC3, the reboot command has been working fine and the power button on the laptop even stopped the HDD in the rack before the laptop powered off.
On stable 9.0 both reboot command and shutdown (I press power button on laptop) freeze. I have to press and hold the power button for 4 seconds to turn off the computer after it freezes.
The last lines I see on console:
This is where it freezes.
Nothing else is connected to the laptop via USB (maybe the internal webcam).
I have another computer with RC3 and same USB storage racks and reboot works on that. On the laptop I updated and rebuilt the kernel and the world several times since stable is out.
The root filesystem is ZFS with ZFS boot.
On RC3, the reboot command has been working fine and the power button on the laptop even stopped the HDD in the rack before the laptop powered off.
On stable 9.0 both reboot command and shutdown (I press power button on laptop) freeze. I have to press and hold the power button for 4 seconds to turn off the computer after it freezes.
The last lines I see on console:
Code:
usbus4: Controller shutdown complete
usbus5: Controller shutdown
....
usbus6: Controller shutdown complete
usbus7: Controller shutdown
Nothing else is connected to the laptop via USB (maybe the internal webcam).
I have another computer with RC3 and same USB storage racks and reboot works on that. On the laptop I updated and rebuilt the kernel and the world several times since stable is out.
The root filesystem is ZFS with ZFS boot.
Code:
FreeBSD xena 9.0-STABLE FreeBSD 9.0-STABLE #0: Fri Feb 10 15:02:26 CET 2012 root@xena:/usr/obj/usr/src/sys/GENERIC amd64
Code:
Bus /dev/usb Device /dev/ugen3.3: ID 174c:55aa ASMedia Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x55aa
bcdDevice 1.00
iManufacturer 2 DMI
iProduct 3 External HDD
iSerial 1 201007230107
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Input/output error
Device Status: 0x0001
Self Powered