Hello All,
When attempting to connect an external USB chassis (have tried several) I am running into the following error "uhub4: device problem (SET_ADDR_FAILED): disabling port 3". The exact uhub and port id changes according to the usb port the device is connected to but the general error remains the same.
I have searched around everywhere I can looking for a solution but cannot find one that is a.) my exact error, and b.) able to be tested.
I've included as many outputs as I can think of, if there are any suggestions at all, I'm open to them. Thanks in advance.
uname -v output:
dmesg output:
When attempting to connect an external USB chassis (have tried several) I am running into the following error "uhub4: device problem (SET_ADDR_FAILED): disabling port 3". The exact uhub and port id changes according to the usb port the device is connected to but the general error remains the same.
I have searched around everywhere I can looking for a solution but cannot find one that is a.) my exact error, and b.) able to be tested.
I've included as many outputs as I can think of, if there are any suggestions at all, I'm open to them. Thanks in advance.
uname -v output:
Code:
FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009 [email]root@driscoll.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/GENERIC
dmesg output:
Code:
CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2496.28-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40ce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 6423498752 (6125 MB)
avail memory = 6188474368 (5901 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see [url]http://opensolaris.org/os/licensing/opensolaris_license/[/url]
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pci8: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.3 on pci4
pci9: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib6