PPPoE on FreeBSD 7.1

V

valoel

im trying to make loadbalancing between two adsl with freebsd 7.1 release, i have recompile the kernel and add some option like below.
Code: 
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_PPPOE
options NETGRAPH_SOCKET
sysctl enable
Code: 
net.inet.ip.forwarding=1
net.graph.nonstandart_pppoe=1
modem with dlink 520B Bridge mode vci 0 vpi 35
im trying to dial the first pppoe
Code: 
ppp.conf 
default:
set log Phase Chat LCP IPCP CCP tun command
set redial 15 0
set reconnect 15 10000
pppoe0:
set device PPPoE:bfe0
disable acfcomp protocomp
deny acfcomp
set mtu max 1492
set mru max 1492
set crtscts off
set speed sync
enable lqr
set lqrperiod 5
set cd 5
set dial
set login
set timeout 0
set authname [email]xxxxxxxxxxxx@telkom.net[/email]
set authkey xxxxxxxxxxxxxxx
add! default HISADDR
enable dns
enable mssfixup

but the PPP Log is like this...
Code: 
Dec 30 08:45:37 ppp[1170]: tun0: Chat: deflink: Redial timer expired.
Dec 30 08:45:37 ppp[1170]: tun0: Phase: deflink: Connected!
Dec 30 08:45:37 ppp[1170]: tun0: Phase: deflink: opening -> dial
Dec 30 08:45:37 ppp[1170]: tun0: Phase: deflink: dial -> carrier
Dec 30 08:45:42 ppp[1170]: tun0: Phase: deflink: Disconnected!
Dec 30 08:45:42 ppp[1170]: tun0: Phase: deflink: carrier -> hangup
Dec 30 08:45:42 ppp[1170]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Dec 30 08:45:42 ppp[1170]: tun0: Phase: deflink: 0 packets in, 0 packets out
Dec 30 08:45:42 ppp[1170]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Tue Dec 30 08:45:37 2008
Dec 30 08:45:42 ppp[1170]: tun0: Phase: deflink: hangup -> opening
Dec 30 08:45:42 ppp[1170]: tun0: Phase: deflink: Enter pause (15) for redialing.
Dec 30 08:45:57 ppp[1170]: tun0: Chat: deflink: Redial timer expired.
Dec 30 08:45:57 ppp[1170]: tun0: Phase: deflink: Connected!
Dec 30 08:45:57 ppp[1170]: tun0: Phase: deflink: opening -> dial
Dec 30 08:45:57 ppp[1170]: tun0: Phase: deflink: dial -> carrier
Dec 30 08:46:02 ppp[1170]: tun0: Phase: deflink: Disconnected!
Dec 30 08:46:02 ppp[1170]: tun0: Phase: deflink: carrier -> hangup
Dec 30 08:46:02 ppp[1170]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Dec 30 08:46:02 ppp[1170]: tun0: Phase: deflink: 0 packets in, 0 packets out
Dec 30 08:46:02 ppp[1170]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Tue Dec 30 08:45:57 2008
Dec 30 08:46:02 ppp[1170]: tun0: Phase: deflink: hangup -> opening
Dec 30 08:46:02 ppp[1170]: tun0: Phase: deflink: Enter pause (15) for redialing.
what is the diference if we set device "!/usr/sbin/pppoe -i bfe0" with PPPoE:bfe0
is i set the configuration "!/usr/sbin/pppoe -i bfe0" the result is "Cannot exec "/usr/sbin/pppoe -i bfe0": No such file or directory"

what should i do ??
thanks :f newbie
 
valoel said:
what is the diference if we set device "!/usr/sbin/pppoe -i bfe0" with PPPoE:bfe0
is i set the configuration "!/usr/sbin/pppoe -i bfe0" the result is "Cannot exec "/usr/sbin/pppoe -i bfe0": No such file or directory"
Click to expand...
That's because the command is /usr/sbin/ppp not /usr/sbin/pppoe

http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoe.html

I would suggest just making 2 connections. One on tun0, the other on tun1. Then do the load balancing with PF or similar.
 
yes, i have try it sometime before to change set device "!/usr/sbin/pppoe -i bfe0" to !/usr/sbin/ppp -i bfe0"
, but still doesn't resolve the problem, still "No such file or directory" and the ppp logging is like above, still doesnt connect to the ppp server.
what else should i do ??
 
As I said, just make 1 connection with tun0. And make another with tun1.

Follow the example in the handbook.
 
fwiw, this looks like a very nonstandard way of writing nonstandard, but I don't know.

Code: 
net.graph.nonstandart_pppoe=1
 
You might want to check out the mpd port. It allows you to shotgun multiple links to the internet together into one virtual interface. It also handles the PPPoE connection/authentication stuff as well. Plus, no kernel compiling is needed. :)
 
still doesnt resolv the problem :(
here is the ppp log
Code: 
Jan  1 04:36:18  ppp[2015]: tun0: LCP: deflink: LayerFinish
Jan  1 04:36:18  ppp[2015]: tun0: LCP: deflink: State change Starting --> Initial
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: Disconnected!
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: lcp -> logout
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: Disconnected!
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: logout -> hangup
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: Connect time: 1 secs: 247 octets in, 26 octets out
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: 10 packets in, 4 packets out
Jan  1 04:36:18  ppp[2015]: tun0: Phase:  total 273 bytes/sec, peak 123 bytes/sec on Thu Jan  1 04:36:18 2009
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: HUPing 2029
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: hangup -> opening
Jan  1 04:36:18  ppp[2015]: tun0: Phase: deflink: Enter pause (15) for redialing.
Jan  1 04:36:18  ppp[2015]: tun0: Chat: deflink: Reconnect try 5 of 10000
Jan  1 04:36:36  ppp[2015]: tun0: Chat: deflink: Redial timer expired.
Jan  1 04:36:36  ppp[2015]: tun0: Warning: Carrier settings ignored
Jan  1 04:36:36  ppp[2015]: tun0: Phase: deflink: Connected!
Jan  1 04:36:36  ppp[2015]: tun0: Phase: deflink: opening -> dial
Jan  1 04:36:36  ppp[2015]: tun0: Phase: deflink: dial -> carrier
Jan  1 04:36:36  ppp[2015]: tun0: Phase: deflink: carrier -> login
Jan  1 04:36:36  ppp[2015]: tun0: Phase: deflink: login -> lcp
Jan  1 04:36:36  ppp[2015]: tun0: LCP: FSM: Using "deflink" as a transport
Jan  1 04:36:36  ppp[2015]: tun0: LCP: deflink: State change Initial --> Closed
Jan  1 04:36:36  ppp[2015]: tun0: LCP: deflink: State change Closed --> Stopped
Jan  1 04:36:37  ppp[2015]: tun0: LCP: deflink: LayerStart
Jan  1 04:36:37  ppp[2015]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492
Jan  1 04:36:37  ppp[2015]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped
Jan  1 04:36:37  ppp[2015]: tun0: LCP:  MRU[4] 1492
Jan  1 04:36:37  ppp[2015]: tun0: LCP:  MAGICNUM[6] 0xbfbb0c50
Jan  1 04:36:37  ppp[2015]: tun0: LCP:  QUALPROTO[8] proto c025, interval 5000ms
Jan  1 04:36:37  ppp[2015]: tun0: LCP: deflink: State change Stopped --> Req-Sent
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: read (0): Connection reset by peer
Jan  1 04:36:37  ppp[2015]: tun0: LCP: deflink: State change Req-Sent --> Starting
Jan  1 04:36:37  ppp[2015]: tun0: LCP: deflink: LayerFinish
Jan  1 04:36:37  ppp[2015]: tun0: LCP: deflink: State change Starting --> Initial
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: Disconnected!
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: lcp -> logout
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: Disconnected!
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: logout -> hangup
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: Connect time: 1 secs: 247 octets in, 26 octets out
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: 12 packets in, 5 packets out
Jan  1 04:36:37  ppp[2015]: tun0: Phase:  total 273 bytes/sec, peak 123 bytes/sec on Thu Jan  1 04:36:37 2009
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: HUPing 2031
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: hangup -> opening
Jan  1 04:36:37  ppp[2015]: tun0: Phase: deflink: Enter pause (15) for redialing.
Jan  1 04:36:37  ppp[2015]: tun0: Chat: deflink: Reconnect try 6 of 10000
 
yes, i get the problem now, i have to set vci and vpi at the modem 8 and 81, before i change it, i just set the modem to mode bridge and vci cpi is 0 and 35, but now i set to 8 and 81, thanks for the help guys =)
Code: 
Jan  1 05:17:40  ppp[2400]: tun0: LCP: deflink: RecvEchoRequest(0) state = Opened
Jan  1 05:17:40  ppp[2400]: tun0: LCP: deflink: SendEchoReply(0) state = Opened
Jan  1 05:18:40  ppp[2400]: tun0: LCP: deflink: RecvEchoRequest(1) state = Opened
Jan  1 05:18:40  ppp[2400]: tun0: LCP: deflink: SendEchoReply(1) state = Opened
Jan  1 05:19:40  ppp[2400]: tun0: LCP: deflink: RecvEchoRequest(2) state = Opened
Jan  1 05:19:40  ppp[2400]: tun0: LCP: deflink: SendEchoReply(2) state = Opened
 
You must log in or register to reply here.
Back
Top