portmaster -a fails on pango

J

jtl

I'm updating my 8.1-release system with [cmd=]portmaster --packages -a[/cmd] and the pango install failed with the following output. I can't tell what's wrong from this output, and I couldn't find any info on pango in /usr/ports/UPDATING. Thanks for any help with this.

Code: 
/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango/pango-color-table.h:762: syntax error, unexpected identifier in '    guint16 
name_offset;' at 'guint16'
/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango/pango-color-table.h:768: syntax error, unexpected identifier, expecting ',' or ';' in 
'static const ColorEntry color_entries[] = {' at 'color_entries'
/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango/pango-language-sample-table.h:52: syntax error, unexpected identifier in 'LANGUAGE(' at 
'LANGUAGE'
  CCLD   pango-querymodules
Shared object "libicui18n.so.38" not found, required by "libgvfsdbus.so"
Failed to load module: /usr/local/lib/gio/modules/libgvfsdbus.so
Shared object "libicui18n.so.38" not found, required by "libgioremote-volume-monitor.so"
Failed to load module: /usr/local/lib/gio/modules/libgioremote-volume-monitor.so
Shared object "libicui18n.so.38" not found, required by "libgiogconf.so"
Failed to load module: /usr/local/lib/gio/modules/libgiogconf.so
/usr/bin/ld: warning: libz.so.4, needed by /usr/local/lib/libfontconfig.so, not found (try using -rpath or -rpath-link)
  GISCAN PangoFT2-1.0.gir
  GICOMP Pango-1.0.gir
Shared object "libicui18n.so.38" not found, required by "libgvfsdbus.so"
Failed to load module: /usr/local/lib/gio/modules/libgvfsdbus.so
Shared object "libicui18n.so.38" not found, required by "libgioremote-volume-monitor.so"
Failed to load module: /usr/local/lib/gio/modules/libgioremote-volume-monitor.so
Shared object "libicui18n.so.38" not found, required by "libgiogconf.so"
Failed to load module: /usr/local/lib/gio/modules/libgiogconf.so
/usr/local/include/freetype2/freetype/config/ftconfig.h:323: syntax error, unexpected '{', expecting ',' or ';' in '  {' at '{'
/usr/local/include/freetype2/freetype/config/ftconfig.h:327: syntax error, unexpected identifier in '    __asm__ __volatile__ (' at '__asm__'
/usr/include/machine/endian.h:107: syntax error, unexpected '{' in ' return (__extension__ ({ register __uint32_t __X = (_x); __asm ("bswap %0" 
: "+r" (__X)); __X; }));' at '{'
/usr/include/machine/endian.h:107: syntax error, unexpected ';' in ' return (__extension__ ({ register __uint32_t __X = (_x); __asm ("bswap %0" 
: "+r" (__X)); __X; }));' at ';'
/usr/bin/ld: warning: libz.so.4, needed by /usr/local/lib/libfontconfig.so, not found (try using -rpath or -rpath-link)
/libexec/ld-elf.so.1: Shared object "libz.so.4" not found, required by "libfontconfig.so.1"
Command '['/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango/tmp-introspectqee311/PangoFT2-1.0', '--introspect-dump=/usr/ports/x11-
toolkits/pango/work/pango-1.28.3/pango/tmp-introspectqee311/types.txt,/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango/tmp-
introspectqee311/dump.xml']' returned non-zero exit status 1
gmake[4]: *** [PangoFT2-1.0.gir] Error 1
gmake[4]: Leaving directory `/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango'
gmake[3]: *** [all-recursive] Error 1
gmake[3]: Leaving directory `/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango'
gmake[2]: *** [all] Error 2
gmake[2]: Leaving directory `/usr/ports/x11-toolkits/pango/work/pango-1.28.3/pango'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/x11-toolkits/pango/work/pango-1.28.3'
gmake: *** [all] Error 2
*** Error code 1

Stop in /usr/ports/x11-toolkits/pango.

===>>> make failed for x11-toolkits/pango
===>>> Aborting update

===>>> Update for pango-1.26.2 failed
===>>> Aborting update

===>>> Update for gtk-2.18.6 failed
===>>> Aborting update

===>>> Update for devel/dconf failed
===>>> Aborting update

===>>> Update for gconf2-2.28.0 failed
===>>> Aborting update

===>>> Update for deskutils/alacarte failed
===>>> Aborting update
 
Partial port upgrade? libicui18n.so.38 is an old version. The --packages option may be causing the problem.
 
Thanks - between some other flailing I did and removing the --packages option I managed to get pango updated. Now I'm stalled on a build problem with hal. Unfortunately, I often run into a seemingly endless stream of problems whenever I try to update the ports collection. I've tried portupgrade, portmaster and portmanager, but I have yet to find a method that doesn't cost me a week of pain. Is there a way to avoid this? At this point I'd be willing to start over from scratch if I knew a reliable way to do that. Do you have any recommendations?
 
Thanks for the link. I've resolved the hal build problem, but if I run into another issue that I can't find any info on, I'll give your method a try. There was a time when I was guilty of not looking at /usr/ports/UPDATING, but I'm in the habit of checking it now. In the past several days I've run into a number of problems about which I can find no information in /usr/ports/UPDATING, and when I also can't find any info online it starts to get frustrating.
 
You must log in or register to reply here.
Back
Top