Howdy,
I'm hoping there is a quick fix for this issue. Like the title says, I have a portable 500GB USB drive formatted NTFS (From within Win7, I think) in a generic case I use for backups and sneaker-net between multiple machines and operating systems. It's been tested, and is known to work, on many desktops and laptops, except -you guessed it- my FreeBSD laptop. I'm hoping that I've just missed something really, really simple. Here's the pertinent info:
The wondrous dmesg:
The almighty diskinfo:
The amazing gpart:
The titillating kldstat:
And finally, pciconf...
Like I said, I'm sure in my haste to get this thing operational I probably missed something really, really obvious. Anyone want to show me the error of my ways?
I'm hoping there is a quick fix for this issue. Like the title says, I have a portable 500GB USB drive formatted NTFS (From within Win7, I think) in a generic case I use for backups and sneaker-net between multiple machines and operating systems. It's been tested, and is known to work, on many desktops and laptops, except -you guessed it- my FreeBSD laptop. I'm hoping that I've just missed something really, really simple. Here's the pertinent info:
The wondrous dmesg:
Code:
ugen6.2: <Super Top> at usbus6
umass0: <Super Top USB 2.0 SATA BRIDGE, class 0/0, rev 2.00/2.00, addr 2> on usbus6
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:3:0:-1: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <WDC WD50 00BEVT-11ZAT0 \\0000\\0000> Fixed Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 476940MB (976773167 512 byte sectors: 255H 63S/T 60801C)
GEOM: da0: corrupt or invalid GPT detected.
GEOM: da0: GPT rejected -- may not be recoverable.
The almighty diskinfo:
Code:
korben# diskinfo -v da0
da0
512 # sectorsize
500107861504 # mediasize in bytes (465G)
976773167 # mediasize in sectors
0 # stripesize
0 # stripeoffset
60801 # Cylinders according to firmware.
255 # Heads according to firmware.
63 # Sectors according to firmware.
M6116A016V20 # Disk ident.
The amazing gpart:
Code:
korben# gpart show da0
gpart: No such geom: da0.
The titillating kldstat:
Code:
korben# kldstat
Id Refs Address Size Name
1 17 0xc0400000 e9ece4 kernel
2 1 0xc71f6000 26000 wpifw.ko
3 1 0xcdda9000 9f6000 nvidia.ko
4 1 0xceebf000 6000 amd.ko
5 1 0xcef0e000 4000 atapicam.ko
And finally, pciconf...
Code:
korben# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x01fe1028 chip=0x2a008086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x01fe1028 chip=0x2a018086 rev=0x0c hdr=0x01
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 PCI Express Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:26:0: class=0x0c0300 card=0x01fe1028 chip=0x28348086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x01fe1028 chip=0x28358086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0x01fe1028 chip=0x283a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
hdac0@pci0:0:27:0: class=0x040300 card=0x01fe1028 chip=0x284b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) HD Audio Controller'
class = multimedia
subclass = HDA
pcib2@pci0:0:28:0: class=0x060400 card=0x01fe1028 chip=0x283f8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:1: class=0x060400 card=0x01fe1028 chip=0x28418086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 2'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:3: class=0x060400 card=0x01fe1028 chip=0x28458086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 4'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:5: class=0x060400 card=0x01fe1028 chip=0x28498086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 6'
class = bridge
subclass = PCI-PCI
uhci2@pci0:0:29:0: class=0x0c0300 card=0x01fe1028 chip=0x28308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:1: class=0x0c0300 card=0x01fe1028 chip=0x28318086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci4@pci0:0:29:2: class=0x0c0300 card=0x01fe1028 chip=0x28328086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0x01fe1028 chip=0x28368086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
pcib6@pci0:0:30:0: class=0x060401 card=0x01fe1028 chip=0x24488086 rev=0xf2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Mobile PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x01fe1028 chip=0x28158086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801HEM (ICH8M) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x01fe1028 chip=0x28508086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller'
class = mass storage
subclass = ATA
ahci0@pci0:0:31:2: class=0x010601 card=0x01fe1028 chip=0x28298086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller'
class = mass storage
subclass = SATA
none0@pci0:0:31:3: class=0x0c0500 card=0x01fe1028 chip=0x283e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) SMBus Controller'
class = serial bus
subclass = SMBus
vgapci0@pci0:1:0:0: class=0x030000 card=0x01fe1028 chip=0x042b10de rev=0xa1 hdr=0x00
vendor = 'nVidia Corporation'
device = 'G86M [Quadro NVS 135M]'
class = display
subclass = VGA
wpi0@pci0:12:0:0: class=0x028000 card=0x10208086 chip=0x42228086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/Wireless 3945ABG [Golan] Network Connection'
class = network
bge0@pci0:9:0:0: class=0x020000 card=0x01fe1028 chip=0x167314e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5755M Gigabit Ethernet PCI Express'
class = network
subclass = ethernet
cbb0@pci0:3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
vendor = 'O2 Micro, Inc.'
device = 'Cardbus bridge'
class = bridge
subclass = PCI-CardBus
fwohci0@pci0:3:1:4: class=0x0c0010 card=0x01fe1028 chip=0x00f71217 rev=0x02 hdr=0x00
vendor = 'O2 Micro, Inc.'
device = 'Firewire (IEEE 1394)'
class = serial bus
subclass = FireWire
Like I said, I'm sure in my haste to get this thing operational I probably missed something really, really obvious. Anyone want to show me the error of my ways?