I tried setting it with a static IP and DHCP changing the options in bsdconfig but nothing works how did deleting packages cause this???
hostname="sylve-node.lan"
keymap="uk.kbd"
keyrate="fast"
ifconfig_re0="DHCP"
lpd_enable="YES"
powerd_enable="YES"
powerd_flags="-a hiadaptive -i 25 -r 85 -N"
ntpd_enable="YES"
ntpd_sync_on_start="YES"
local_unbound_enable="YES"
powerd_enable="YES"
moused_enable="YES"
virtual_oss_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
zfs_enable="YES"
snd_driver_load="YES"
kld_list="amdgpu pulseaudio snd_hda fusefs dtraceall ng_ubt nullfs linsysfs tmpfs fdescfs devfs sw msdosfs procfs"
seatd_enable="YES"
dbus_enable="YES"
sddm_enable="YES"
sddm_lang="en_GB.UTF-8"
rtsold_enable="YES"
cupsd_enable="YES"
backlight_enable="YES"
sylve_enable="YES"
dnsmasq_enable="YES"
linux_enable="YES"
swtpm_enable="YES"
linux_mounts_enable="NO"
pf_enable="NO"
nginx_enable="YES"
jail_enable="YES"
jail_parallel_start="YES"
cfumass_enable="NO"
pflog_enable="YES"
WITH_DEBUG="YES"
defaultrouter="192.168.0.1"
background_dhclient="YES"
sylve-node ntpd[3594]: error resolving pool 2.freebsd.pool.ntp.org: Name could not be resolved at this time (2)
re0: flags=1008043<UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST, LOWER_UP> metric 0 mtu 1500
options=64273b<RXCSUM, TXCSUM, VLAN_MTU, VLAN_HWTAGGING, JUMBO_MTU, TSO4, TSO6, LRO, WOL_MAGIC, VLAN_HWTSO, RXCSUM_IPV6, TXCSUM_IPV6>
ether d8:43:ae:b9:89:c7
inet 10.46.0.150 netmask 0xfffffff8 broadcast 10.46.0.151
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=829 <PERFORMNUD, IFDISABLED, AUTO_LINKLOCAL, STABLEADDR>
All I did was uninstall KDE Plasma Wayland konsole networkmgr sddm xwayland how the hell did it mess up my ifconfig and re0 interface I did not change these at all after initally setting is as static and worked before.
hostname="sylve-node.lan"
keymap="uk.kbd"
keyrate="fast"
ifconfig_re0="DHCP"
lpd_enable="YES"
powerd_enable="YES"
powerd_flags="-a hiadaptive -i 25 -r 85 -N"
ntpd_enable="YES"
ntpd_sync_on_start="YES"
local_unbound_enable="YES"
powerd_enable="YES"
moused_enable="YES"
virtual_oss_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
zfs_enable="YES"
snd_driver_load="YES"
kld_list="amdgpu pulseaudio snd_hda fusefs dtraceall ng_ubt nullfs linsysfs tmpfs fdescfs devfs sw msdosfs procfs"
seatd_enable="YES"
dbus_enable="YES"
sddm_enable="YES"
sddm_lang="en_GB.UTF-8"
rtsold_enable="YES"
cupsd_enable="YES"
backlight_enable="YES"
sylve_enable="YES"
dnsmasq_enable="YES"
linux_enable="YES"
swtpm_enable="YES"
linux_mounts_enable="NO"
pf_enable="NO"
nginx_enable="YES"
jail_enable="YES"
jail_parallel_start="YES"
cfumass_enable="NO"
pflog_enable="YES"
WITH_DEBUG="YES"
defaultrouter="192.168.0.1"
background_dhclient="YES"
sylve-node ntpd[3594]: error resolving pool 2.freebsd.pool.ntp.org: Name could not be resolved at this time (2)
re0: flags=1008043<UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST, LOWER_UP> metric 0 mtu 1500
options=64273b<RXCSUM, TXCSUM, VLAN_MTU, VLAN_HWTAGGING, JUMBO_MTU, TSO4, TSO6, LRO, WOL_MAGIC, VLAN_HWTSO, RXCSUM_IPV6, TXCSUM_IPV6>
ether d8:43:ae:b9:89:c7
inet 10.46.0.150 netmask 0xfffffff8 broadcast 10.46.0.151
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=829 <PERFORMNUD, IFDISABLED, AUTO_LINKLOCAL, STABLEADDR>
All I did was uninstall KDE Plasma Wayland konsole networkmgr sddm xwayland how the hell did it mess up my ifconfig and re0 interface I did not change these at all after initally setting is as static and worked before.
