Hello all,
I have bought a PCI Sata Controller Card yesterday.
My system:
Cpu: Intel P3, 864 mhz
Ram: 64 MB SDRam
Sata Controller: VIA VT6421A (1 x E-Sata, 2 x Sata; Raid)
Sata Harddisk: 320 GB Seagate (Originally sata-2 but set to sata-1 with jumper)
System: ACPI Disabled FreeBSD 8.0-P2
When I first plugged the card and harddisk, I formatted harddisk on sysinstall (with failures). Then I could transfer some files over network at 10MB/s. After that, i tried to copy this files from one slice to other on the harddisk. It started to give dma errors. I tried both the card and the harddisk on another machine which as FreeBSD 7.2 and still the same problems.
I tried "hw.intr_storm_threshold=20000" on /boot/loader.conf but not worked.
I do not want to do raid. I do only want use 1 sata harddisk without problem. This is an old computer which i use for automatic backups. Waiting for you help. Thank you all.
I have bought a PCI Sata Controller Card yesterday.
My system:
Cpu: Intel P3, 864 mhz
Ram: 64 MB SDRam
Sata Controller: VIA VT6421A (1 x E-Sata, 2 x Sata; Raid)
Sata Harddisk: 320 GB Seagate (Originally sata-2 but set to sata-1 with jumper)
System: ACPI Disabled FreeBSD 8.0-P2
When I first plugged the card and harddisk, I formatted harddisk on sysinstall (with failures). Then I could transfer some files over network at 10MB/s. After that, i tried to copy this files from one slice to other on the harddisk. It started to give dma errors. I tried both the card and the harddisk on another machine which as FreeBSD 7.2 and still the same problems.
I tried "hw.intr_storm_threshold=20000" on /boot/loader.conf but not worked.
I do not want to do raid. I do only want use 1 sata harddisk without problem. This is an old computer which i use for automatic backups. Waiting for you help. Thank you all.
Code:
backup# dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE-p2 #0: Tue Jan 5 16:02:27 UTC 2010
root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (864.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 67108864 (64 MB)
avail memory = 50786304 (48 MB)
kbd1 at kbdmux0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> on hostb0
agp0: aperture size is 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xdfe80000-0xdfefffff,0xd0000000-0xd7ffffff irq 11 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 12 at device 7.2 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0xa000
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 12 at device 7.3 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0xa000
usbus1: <VIA 83C572 USB controller> on uhci1
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xbc00-0xbcff mem 0xdffef000-0xdffeffff irq 9 at device 9.0 on pci0
sis0: Silicon Revision: DP83815D
miibus0: <MII bus> on sis0
nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:40:f4:6b:fc:bc
sis0: [ITHREAD]
atapci1: <VIA 6421 SATA150 controller> port 0xdc00-0xdc0f,0xd800-0xd80f,0xd400-0xd40f,0xd000-0xd00f,0xcc00-0xcc1f,0xc800-0xc8ff irq 10 at device 10.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
pci0: <multimedia, audio> at device 12.0 (no driver attached)
cpu0 on motherboard
pmtimer0 on isa0
unknown: <PNP0c01> can't assign resources (memory)
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0: Faking up FDCTL