Nvidia fails

A

amandus57

Code: 
[bengt@freebsd ~]$ sudo portmaster /usr/ports/x11/nvidia-driver

===>>> Port directory: /usr/ports/x11/nvidia-driver

===>>> Gathering distinfo list for installed ports

===>>> Launching 'make checksum' for x11/nvidia-driver in background
===>>> Gathering dependency list for x11/nvidia-driver from ports
===>>> Launching child to install emulators/linux_base-c6

===>>> x11/nvidia-driver >> emulators/linux_base-c6 (1/1)

===>>> Port directory: /usr/ports/emulators/linux_base-c6

   ===>>> This port is marked IGNORE
   ===>>> compat.linux.osrelease: 2.6.16 is not supported, please use 2.6.18, BEWARE this is highly experimental


   ===>>> If you are sure you can build it, remove the
    IGNORE line in the Makefile and try again.

===>>> Update for emulators/linux_base-c6 failed
===>>> Aborting update
 
See /usr/ports/UPDATING:
Code: 
20140922:
  AFFECTS: users of emulators/linux_base-f10 and emulators/linux_base-c6
  AUTHOR: xmj@FreeBSD.org

  The complete drop-in replacement linux-c6 port infrastructure is in ports
  and will shortly replace the current linux-f10- ports as default.

  To switch to the linux-c6 infrastructure you should:

  0. Backup all your vital information!
  1. Remove the current linux base port and all linux-f10- ports.
  2. Add the following lines to /etc/make.conf:
       OVERRIDE_LINUX_BASE_PORT=c6
       OVERRIDE_LINUX_NONBASE_PORTS=c6
  3. Make sure no linux application is running.
  4. Set appropriate sysctl (compat.linux.osrelease=2.6.18).
  5. Install emulators/linux-c6.

  That should be enough in most circumstances. If you experience difficulties,
  please be sure to expand step 1 to:

  1a. Remove all ports which depend on linux base port.
  1b. Remove linux base port.
  1c. Clean /compat/linux/ directory.

  Should you encounter any other difficulties not fixed by these extended
  steps, please submit an issue report in Bugzilla and send an email to FreeBSD's
  emulation@ mailing list.
Take special note of step number 4.
 
Or just drop Linux compatibility support from the nvidia-driver configuration options. You can change it with: make config inside /usr/ports/x11/nvidia-driver.
 
deflected said:
Or ... just drop Linux compatibility support from nvidia-driver Configuration options.
You can change it with: make config inside /usr/ports/x11/nvidia-driver
Click to expand...
If you don't require OpenGL support for Linux applications (Games for example) this is probably the best option. The driver doesn't require Linux compatibility for native FreeBSD applications and games.
 
You must log in or register to reply here.
Back
Top