No sound on Cassiopea Fiva MPC-205E

A

ametyst

Hi,
Please help me with a problem.

I installed FreeBSD:

Code: 
casiopea.lukawski.net 7.2-RELEASE-p4 FreeBSD 7.2-RELEASE-p4 #0: Fri Oct  2 12:21:39 UTC 2009     [email]root@i386-
builder.daemonology.net[/email]:/usr/obj/usr/src/sys/GENERIC  i386

on Cassiopea Fiva MPC-205E ( http://world.casio.com/system/pa/products/ht/fiva_mpc205e_spec.html ) with build in sound card "AC-Link connected sound chip (16-bit stereo PCM)"

Then I tried kldload snd_driver and the driver was recognised as:

Code: 
casiopea# cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
Installed devices:
pcm0: <Acer Labs M5451> at io 0x1000 irq 10 kld snd_t4dwave [GIANT] (1p:1v/1r:1v channels duplex default)

but... still no sound

then I enabled the driver in /boot/defaults/loader.conf

Code: 
snd_t4dwave_load="YES"          # t4dwave

the driver is loading properly, but ... still no sound

Following the suggestion from http://lists.freebsd.org/pipermail/freebsd-multimedia/2006-November/005322.html
I've put these into my /etc/sysctl.conf:

Code: 
hw.snd.maxautovchans=10
hw.snd.pcm0.vchans=4
still no sound

if I try

# mpg123 puszek.mp3

I get:

Code: 
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layers 1, 2 and 3
        version 1.10.0; written and copyright by Michael Hipp and others
        free software (LGPL/GPL) without any warranty but with best wishes

Playing MPEG stream 1 of 1: puszek.mp3 ...
[...]
MPEG 1.0 layer III, 320 kbit/s, 44100 Hz joint-stereo

but still no sound.

Please help to solve it, I have no more idea what I can do with.

Thanks in advance,
Take care,
Piotr
 
more nfo

according to "pciconf -lv":

Code: 
pcm0@pci0:0:4:0:        class=0x040100 card=0x01001265 chip=0x545110b9 rev=0x01 hdr=0x00
    vendor     = 'Acer Labs Incorporated (ALi/ULi)'
    device     = 'ALI M5451 PCI AC-Link Controller Audio Device'
    class      = multimedia
    subclass   = audio

and loaded module is:
Code: 
FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
Installed devices:
pcm0: <Acer Labs M5451> at io 0x1000 irq 10 kld snd_t4dwave [GIANT] (1p:1v/1r:1v channels duplex default)

so - should be ok, but no sound. Hardware is OK (tested succesfully under ms win)
 
You must log in or register to reply here.
Back
Top