I am not getting any audio from my speakers. The mic input works and registers input. The device is a Lenovo Ideapad 1i. I have tried adjusting the values in mixer and there is still no audio. The command
Output for
This error does appear:
This can be fixed by adding the following to /boot/loader.conf:
I have chosen not to add this to allow all errors to be shown. It also does not seem to have any effect on audio coming from the speaker.
beep gives no sound.Output for
dmesg:
Code:
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.1-RELEASE releng/15.1-n283562-96841ea08dcf GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 1920x1080
CPU: Intel(R) Pentium(R) Silver N6000 @ 1.10GHz (1113.60-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B>
Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x20c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3893866496 (3713 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO CB-01 >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 3 2 1
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x74442000-0x7444201e
smbios0: Entry point: v2.1 (32-bit), Version: 3.3, BCD Revision: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <LENOVO CB-01>
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0], AE_NOT_FOUND (20250807/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20250807/psobject-372)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
atrtc1: <AT realtime clock> on acpi0
atrtc1: Warning: Couldn't map I/O.
atrtc1: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x4007ffffff at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x7f500000-0x7f50ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5),VEND(c8),VEND(c9),VEND(ca),VEND(cb)>
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <serial bus> at device 21.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x3080-0x3087,0x3088-0x308b,0x3060-0x307f mem 0x7f510000-0x7f511fff,0x7f514000-0x7f5140ff,0x7f513000-0x7f5137ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
sdhci_pci0: <Generic SD HCI> mem 0x600111d000-0x600111dfff at device 26.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
sdhci_pci1: <Generic SD HCI> mem 0x7f401000-0x7f401fff,0x7f400000-0x7f4007ff at device 0.0 on pci1
sdhci_pci1: 1 slot(s) allocated
pci0: <simple comms> at device 30.0 (no driver attached)
pci0: <serial bus> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: Can't map interrupt.
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16.
hwpstate_intel0: <Intel Speed Shift> on cpu0
cpufreq0: <CPU frequency control> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
cpufreq1: <CPU frequency control> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
cpufreq2: <CPU frequency control> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
cpufreq3: <CPU frequency control> on cpu3
Timecounter "TSC" frequency 1113602491 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmcsd0: 125GB <MMCHC MMC128 1.0 SN 006ABB38 MFG 06/2023 by 193 0x0000> at mmc0 200.0MHz/8bit/8192-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 17MB partition 3 at mmcsd0
hdacc0: <Realtek ALC257 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC257 (Analog)> at nid 33 and 18 on hdaa0
pcm1: <Realtek ALC257 (Right Analog Mic)> at nid 25 on hdaa0
hdacc1: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa1
Trying to mount root from ufs:/dev/mmcsd0p2 [rw]...
uhub0: 14 ports with 14 removable, self powered
ugen0.2: <Azurewave Integrated Camera> at usbus0
ugen0.3: <vendor 0x8087 product 0x0026> at usbus0
[drm] Got Intel graphics stolen memory base 0x7b800000, size 0x3c00000
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drmn0
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drmn0
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
lkpi_iic8: <LinuxKPI I2C> on drmn0
iicbus8: <Philips I2C bus> on lkpi_iic8
iic8: <I2C generic I/O> on iicbus8
drmn0: successfully loaded firmware image 'i915/icl_dmc_ver1_09.bin'
drmn0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)
sysctl_add_oid: can't re-use a leaf (hw.dri.debug)!
lkpi_iic9: <LinuxKPI I2C> on drm1
iicbus9: <Philips I2C bus> on lkpi_iic9
iic9: <I2C generic I/O> on iicbus9
[drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=1080 width=1920 depth=32
pbase=0x4000000000 vbase=0xfffffe0085e00000
name=drmn0 id=i915drmfb flags=0x0 stride=7680
end FB_INFO
iwlwifi0: <iwlwifi> mem 0x6001114000-0x6001117fff at device 20.3 on pci0
iwlwifi0: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
iwlwifi0: PCI dev 4df0/0074, rev=0x351, rfid=0x10a100
iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz
iwlwifi0: successfully loaded firmware image 'iwlwifi-QuZ-a0-hr-b0-77.ucode'
iwlwifi0: loaded firmware version 77.30b1cbd8.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm
iwlwifi0: Detected RF HR B5, rfid=0x10a100
iwlwifi0: base HW address:
ig4iic0: <Intel Jasper Lake I2C Controller-0> at device 21.0 on pci0
ig4iic0: Using MSI
iicbus10: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iic10: <I2C generic I/O> on iicbus10
ig4iic1: <Intel Jasper Lake I2C Controller-1> at device 21.1 on pci0
ig4iic1: Using MSI
iicbus11: <Philips I2C bus (ACPI-hinted)> on ig4iic1
iicbus11: <unknown card> at addr 0x2c
iic11: <I2C generic I/O> on iicbus11
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: Embedded MOF found
acpi_wmi3: <ACPI-WMI mapping> on acpi0
acpi_wmi3: Embedded MOF found
acpi_dock0: <ACPI Docking Station> on acpi0
hdac0: Command 0x2043b000 timeout on address 2
wlan0: Ethernet address:
lo0: link state changed to UP
iichid0: <SYNA2BA6:00 06CB:CE2D I2C HID device> at addr 0x2c on iicbus11
iichid0: Using sampling mode
hidbus0: <HID bus> on iichid0
hms0: <SYNA2BA6:00 06CB:CE2D Mouse> on hidbus0
hms0: 2 buttons and [XY] coordinates ID=2
hmt0: <SYNA2BA6:00 06CB:CE2D TouchPad> on hidbus0
hconf0: <SYNA2BA6:00 06CB:CE2D Configuration> on hidbus0
hmt0: Multitouch touchpad with 0 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [1224:804]
wlan0: link state changed to UP
wg0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)This error does appear:
Code:
hdac0: Command 0x2043b000 timeout on address 2
Code:
compat.linuxkpi.i915_disable_power_well="0"I have chosen not to add this to allow all errors to be shown. It also does not seem to have any effect on audio coming from the speaker.