First i run the noip2 program and then i take some info with the following:
# noip2 -S
1 noip2 process active.
Process 20415, started as /usr/home/nikos/noip2, (version 2.1.7)
Using configuration from /usr/local/etc/no-ip2.conf
Last IP Address set 0.0.0.0
Updating every 30 minutes via /dev/re0 with NAT enabled.
as u can see the last IP it gets is 0.0.0.0
Why is that?Do i have to port forward or modify any files inside the FreeBSD?
when i execute the command 'dig <my-no-ip>' i get:
; <<>> DiG 9.4.2-P2 <<>> mynoip.no-ip.org
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17217
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 4, ADDITIONAL: 2
;; QUESTION SECTION:
;mynoip.no-ip.org. IN A
;; ANSWER SECTION:
mynoip.no-ip.org. 60 IN A 188.8.131.52
;; AUTHORITY SECTION:
no-ip.org. 1 IN NS nf3.no-ip.com.
no-ip.org. 1 IN NS nf4.no-ip.com.
no-ip.org. 1 IN NS nf1.no-ip.com.
no-ip.org. 1 IN NS nf2.no-ip.com.
;; ADDITIONAL SECTION:
nf4.no-ip.com. 85639 IN A 184.108.40.206
nf1.no-ip.com. 84567 IN A 220.127.116.11
;; Query time: 157 msec
;; SERVER: 192.168.0.1#53(192.168.0.1)
;; WHEN: Sun Jan 18 20:42:36 2009
;; MSG SIZE rcvd: 166
but my WAN ip is not 18.104.22.168 as i can see in http://www.ip-address.com.
Also when i ping myip.no-ip.org i get the packets with 0% loss.
So, what all this output from dig means?
Also when i run noip2 command again i get Last IP address get 0.0.0.0
I have set up the my no-ip account with windows XP and i have used it for a long time now. But i think in FreBSD i cant configure it to work properly. Consider that i have a router that is assigned the LAN ip 192.168.0.1, a desktop that is assigned the LAN ip 192.168.0.2 and the laptop-FreeBSD that is assigned the LAN ip 192.168.0.3.