Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD Phenom(tm) II X2 555 Processor (3210.87-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f43 Family=0x10 Model=0x4 Stepping=3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8200699904 (7820 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <050410 APIC1420>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150515/tbfadt-644)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <050410 XSDT1420> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdfffffff,0xfe6f0000-0xfe6fffff irq 19 at device 0.0 on pci1
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xfe6e0000-0xfe6effff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe7fe000-0xfe7fffff irq 17 at device 0.0 on pci2
xhci0: 32 bytes context size, 32-bit DMA
usbus0 on xhci0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB361 UDMA133 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfe8fe000-0xfe8fffff irq 18 at device 0.0 on pci3
ahci0: <JMicron JMB361 AHCI SATA controller> at channel -1 on atapci0
ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x1<NOFORCE>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ata2: <ATA channel> at channel 0 on atapci0
ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 18 at device 18.0 on pci0
usbus1 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 18 at device 19.0 on pci0
usbus3 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
hdac0: <ATI SB600 HDA Controller> mem 0xfe5f4000-0xfe5f7fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
emu10kx0: <Creative SBLive! Value [CT4832]> port 0xdc00-0xdc1f irq 20 at device 5.0 on pci4
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pci4: <input device> at device 5.1 (no driver attached)
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xd400-0xd4ff mem 0xfe9fbc00-0xfe9fbcff irq 21 at device 6.0 on pci4
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:05:08:90:8f
pci4: <serial bus, FireWire> at device 7.0 (no driver attached)
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 20.5 on pci0
usbus5 on ohci2
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 16 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00100000
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 20:cf:30:07:b6:ac
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f3000-0xfe5f3fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff000-0xfe5ff0ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd3800-0xd67ff,0xd6800-0xd77ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
md0: Preloaded image </mfsroot> 67928064 bytes at 0xffffffff8199ddb0
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm2: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <0x1033> at usbus0
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen4.1: <ATI> at usbus4
uhub0: 4 ports with 4 removable, self powered
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub1: 5 ports with 5 removable, self powered
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <ATI> at usbus7
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub3: 5 ports with 5 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub7: 4 ports with 4 removable, self powered
ugen2.2: <PNY Technologies> at usbus2
umass0: <PNY Technologies USB 2.0 FD, class 0/0, rev 2.00/1.00, addr 2> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:9:0:-1: Attached to scbus9
ugen4.2: <SanDisk> at usbus4
umass1: <SanDisk Cruzer, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass1: SCSI over Bulk-Only; quirks = 0xc100
umass1:10:1:-1: Attached to scbus10
ugen3.2: <Logitech> at usbus3
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus3
kbd2 at ukbd0
ahcich1: AHCI reset: device not ready after 31000ms (tfd = 000000ff)
ahcich1: Poll timeout on slot 1 port 15
ahcich1: is 00000000 cs 00000002 ss 00000000 rs 00000002 tfd 77 serr 00020000 cmd 0004c111
(aprobe1:ahcich1:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe1:ahcich1:0:15:0): CAM status: Command timeout
(aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
ahcich1: Poll timeout on slot 2 port 15
ahcich1: is 00000000 cs 00000004 ss 00000000 rs 00000004 tfd 77 serr 00020000 cmd 0004c211
(aprobe1:ahcich1:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe1:ahcich1:0:15:0): CAM status: Command timeout
(aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted
ahcich1: Poll timeout on slot 3 port 0
ahcich1: is 00000000 cs 00000008 ss 00000000 rs 00000008 tfd 77 serr 00020000 cmd 0004c311
(aprobe0:ahcich1:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich1:0:0:0): CAM status: Command timeout
(aprobe0:ahcich1:0:0:0): Error 5, Retries exhausted
ada0 at ahcich3 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD30EZRX-00D8PB0 80.00A80> ACS-2 ATA SATA 3.x device
da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
da0: <PNY USB 2.0 FD 0.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number UT2B191900000176
da0: 40.000MB/s transfers
da0: 15274MB (31281152 512 byte sectors: 255H 63S/T 1947C)
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim1 bus 1 scbus10 target 0 lun 0
da1: <SanDisk Cruzer 1.00> Removable Direct Access SCSI-2 device
da1: Serial Number 20053551930EEB63709E
da1: 40.000MB/s transfers
da1: 7629MB (15625216 512 byte sectors: 255H 63S/T 972C)
da1: quirks=0x2<NO_6_BYTE>
ada0: Serial Number WD-WCC4N0094983
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad12
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <WDC WD30EZRX-00D8PB0 80.00A80> ACS-2 ATA SATA 3.x device
ada1: Serial Number WD-WCC4N0129034
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad16
GEOM: da1: the secondary GPT header is not in the last LBA.
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1605436013 Hz quality 800
GEOM: diskid/DISK-20053551930EEB63709E: the secondary GPT header is not in the last LBA.
Trying to mount root from ufs:/dev/md0 []...
ugen2.2: <PNY Technologies> at usbus2 (disconnected)
umass0: at uhub2, port 3, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
da0: <PNY USB 2.0 FD 0.00> s/n UT2B191900000176 detached
(da0:umass-sim0:0:0:0): Periph destroyed
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)