Hi,
I've got my FreeBSD 10.1 server setup as a router/firewall with XS4all. Up until now Ive been using PPP. It works, but performance is a bit lacking. I'd like to switch to MPD5, but I can't seem to get a working config.
First off. My ppp settings.
rc.conf
/etc/ppp/ppp.conf
This works, but is noticeably slower than the default Fritz!box, so I tried setting up mpd like so.
rc.conf
/usr/local/etc/mpd5/mpd.conf
When I run mad in the foreground with the service stopped, this is the result.
I'm a bit out of my depth. I'd appreciate any pointers.
EDIT: I've found the solution to the initial problem. Updated the post to reflect the partially fixed config and the new output.
EDIT2: Removed the IPV6 config for now.
I've got my FreeBSD 10.1 server setup as a router/firewall with XS4all. Up until now Ive been using PPP. It works, but performance is a bit lacking. I'd like to switch to MPD5, but I can't seem to get a working config.
First off. My ppp settings.
rc.conf
Code:
## Basic networking
hostname="atlas"
ifconfig_em0_name="lan0"
ifconfig_igb0_name="wan0"
gateway_enable="yes"
## External interface
ifconfig_igb0="up -wol -arp"
ifconfig_igb0_ipv6="inet6 ifdisabled -nud -auto_linklocal -accept_rtadv"
## Internal interface
ifconfig_lan0="inet 10.0.0.1 netmask 255.255.255.0"
## PPOE_config XS4ALL
ppp_enable="yes"
ppp_mode="ddial"
ppp_nat="yes"
ppp_profile="xs4all"
netwait_enable="YES"
netwait_ip="194.109.5.211"
netwait_if="tun0"/etc/ppp/ppp.conf
Code:
default:
set log Phase IPCP IPV6CP tun +connect
disable dns
xs4all:
ident Fritz!box 7490
set device PPPoE:vlan0
set speed sync
set mru 1492
set mtu 1492
set ctsrts off
enable mssfixup
disable enddisc
set server /var/run/ppp/ppoe "" 0177
set ifaddr 0.0.0.0/0 IP HERE 255.255.255.255 0.0.0.0
add! default HISADDR
add! default HISADDR6
set authname FB7490@xs4all.nl
set authkey FB7490
set redial 0 0
set dial
set login
set vj slot comp offThis works, but is noticeably slower than the default Fritz!box, so I tried setting up mpd like so.
rc.conf
Code:
### Basic networking
hostname="Atlas"
#ifconfig_igb0_name="wan0"
ifconfig_em0_name="lan0"
ifconfig_lan0="inet 10.0.0.1/24" # Set local IP4
#ifconfig_lan0_ipv6="inet6 MYIP::/48" # Set local IP6
### External interface
ifconfig_igb0="up -wol -arp"
vlans_igb0="vlan0"
create_args_vlan0="vlan 6 -arp"
ifconfig_vlan0="inet inet6 ifdisabled -nud -auto_linklocal -accept_rtadv"
mpd_enable="YES"
gateway_enable="YES"
#ipv6_gateway_enable="YES"/usr/local/etc/mpd5/mpd.conf
Code:
startup:
default:
load xs4all
xs4all:
create bundle static B1
set iface up-script /etc/mpd5/mpd-linkup.sh
set iface down-script /etc/mpd5/mpd-linkdown.sh
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
# set bundle enable ipv6cp
create link static L1 pope
set link action bundle B1
set link max-redial 0
set link mtu 1492
set link keep-alive 10 60
set link passive enable
set auth authname fritz3970@xs4all.nl
set auth password 1234
set pppoe iface vlan0
set pppoe service ""
openWhen I run mad in the foreground with the service stopped, this is the result.
Code:
# mpd5
Multi-link PPP daemon for FreeBSD
process 1122 started, version 5.7 (root@101amd64-default-job-14 10:27 17-Sep-2015)
[B1] Bundle: Interface ng1 created
mpd.conf:24: Unknown command: 'set link passive enable'. Try "help".
[L1] [L1] Link: OPEN event
[L1] LCP: Open event
[L1] LCP: state change Initial --> Starting
[L1] LCP: LayerStart
[L1] PPPoE: Connecting to ''
PPPoE: rec'd ACNAME "dr11.d12"
[L1] PPPoE: connection successful
[L1] Link: UP event
[L1] LCP: Up event
[L1] LCP: state change Starting --> Req-Sent
[L1] LCP: SendConfigReq #1
[L1] PROTOCOMP
[L1] MRU 1492
[L1] MAGICNUM 3bc55382
[L1] LCP: SendConfigReq #2
[L1] PROTOCOMP
[L1] MRU 1492
[L1] MAGICNUM 3bc55382
[L1] LCP: rec'd Configure Request #187 (Req-Sent)
[L1] AUTHPROTO PAP
[L1] MAGICNUM 5f8987c8
[L1] LCP: SendConfigAck #187
[L1] AUTHPROTO PAP
[L1] MAGICNUM 5f8987c8
[L1] LCP: state change Req-Sent --> Ack-Sent
[L1] LCP: rec'd Configure Ack #2 (Ack-Sent)
[L1] PROTOCOMP
[L1] MRU 1492
[L1] MAGICNUM 3bc55382
[L1] LCP: state change Ack-Sent --> Opened
[L1] LCP: auth: peer wants PAP, I want nothing
[L1] PAP: using authname "fritz3970@xs4all.nl"
[L1] PAP: sending REQUEST #1 len: 29
[L1] LCP: LayerUp
[L1] PAP: rec'd ACK #1 len: 5
[L1] LCP: authorization successful
[L1] Link: Matched action 'bundle "B1" ""'
[L1] Link: Join bundle "B1"
[B1] Bundle: Status update: up 1 link, total bandwidth 64000 bps
[B1] IPCP: Open event
[B1] IPCP: state change Initial --> Starting
[B1] IPCP: LayerStart
[B1] IPCP: Up event
[B1] IPCP: state change Starting --> Req-Sent
[B1] IPCP: SendConfigReq #1
[B1] IPADDR 0.0.0.0
[B1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[B1] IPCP: rec'd Configure Reject #1 (Req-Sent)
[B1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[B1] IPCP: SendConfigReq #2
[B1] IPADDR 0.0.0.0
[B1] IPCP: rec'd Configure Nak #2 (Req-Sent)
[B1] IPADDR MYIP
[B1] MYIP is OK
[B1] IPCP: SendConfigReq #3
[B1] IPADDR MYIP
[B1] IPCP: rec'd Configure Ack #3 (Req-Sent)
[B1] IPADDR MYIP
[B1] IPCP: state change Req-Sent --> Ack-Rcvd
[B1] IPCP: rec'd Configure Request #204 (Ack-Rcvd)
[B1] IPADDR 194.109.5.175
[B1] 194.109.5.175 is OK
[B1] IPCP: SendConfigAck #204
[B1] IPADDR 194.109.5.175
[B1] IPCP: state change Ack-Rcvd --> Opened
[B1] IPCP: LayerUp
[B1] MYIP -> 194.109.5.175
[B1] system: command "/etc/mpd5/mpd-linkup.sh ng1 inet MYIP/32 194.109.5.175 '-' '' '' '00:00:00:00:00:00'" returned 32512
[B1] IPCP: parameter negotiation failed
[B1] IPCP: state change Opened --> Stopping
[B1] IPCP: SendTerminateReq #4
[B1] IPCP: LayerDown
[B1] system: command "/etc/mpd5/mpd-linkdown.sh ng1 inet MYIP/32 194.109.5.175 '-' '00:00:00:00:00:00'" returned 32512
[B1] IPCP: rec'd Terminate Ack #4 (Stopping)
[B1] IPCP: state change Stopping --> Stopped
[B1] IPCP: LayerFinish
[B1] Bundle: No NCPs left. Closing links...
[B1] Bundle: closing link "L1"...
[L1] Link: CLOSE event
[L1] LCP: Close event
[L1] LCP: state change Opened --> Closing
[L1] Link: Leave bundle "B1"
[B1] Bundle: Status update: up 0 links, total bandwidth 9600 bps
[B1] IPCP: Close event
[B1] IPCP: state change Stopped --> Closed
[B1] IPCP: Down event
[B1] IPCP: state change Closed --> Initial
[L1] LCP: SendTerminateReq #3
[L1] LCP: LayerDown
[L1] LCP: rec'd Terminate Ack #3 (Closing)
[L1] LCP: state change Closing --> Closed
[L1] LCP: LayerFinish
[L1] Link: DOWN event
[L1] LCP: Down event
[L1] LCP: state change Closed --> InitialI'm a bit out of my depth. I'd appreciate any pointers.
EDIT: I've found the solution to the initial problem. Updated the post to reflect the partially fixed config and the new output.
EDIT2: Removed the IPV6 config for now.