******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=4427 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=4427 heads=255 sectors/track=63 (16065 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 69625647 (33996 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 69625710, size 1494045 (729 Meg), flag 0
beg: cyl 1023/ head 255/ sector 63;
end: cyl 1023/ head 254/ sector 63
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
djemmers said:to make my backup easier
is ther a way to give a command (through putty) to save a certain folder (/home/jan/Maildir) to a place on my HD ?
because I can't browse to the maildirs directly...
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 4 files 1
WARNING: /var was not properly dismounted
umass0: Western Digital External HDD, rev 2.00/1.75, addr 3
umass0: at uhub0 port 1 (addr 3) disconnected
umass0: detached
umass0: Western Digital External HDD, rev 2.00/1.75, addr 3
mount -o large -t msdosfs /dev/da0s1 /mountpoint
umass0: Maxtor OneTouch, rev 2.00/2.00, addr 2
umass0: Get Max Lun not supported (STALLED)
da2 at umass-sim0 bus 0 target 0 lun 0
da2:<Maxtor OneTouch 0201> Fixed Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: 117246MB
You can easily remember it, logically, without having to check: the MBR uses a 32-bit int/dword to store the BIOS partition size, so the maximum supported is 4GB (2^32) * 512 bytes (the typical size of a sector) = 2048GB = 2TB. Easy." said:Oh, you're right.... [just checked wikipedia]
You can check the MBR usingdjemmers said:when I try to mount:
Code:mount: /dev/da2s1 on /backup: incorrect super block
How do I know what comes after da2 ?
% fdisk /dev/da2
.